Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2013-04-24 17:07:33
From: herdware
Description: HP 8300 Elite
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.19 (GENERIC) #0: Sat Apr 13 00:56:55 UTC 2013
[_EMAIL_XXXXXXXXXXX]:/home/builds/ab/HEAD/amd64/201304122330Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 12162 MB
avail memory = 11794 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x20<config_unit>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Compaq Elite 8300 CMT
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu3 at mainbus0 apid 6: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu4 at mainbus0 apid 1: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu5 at mainbus0 apid 3: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu6 at mainbus0 apid 5: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu7 at mainbus0 apid 7: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,01072009>, AslId <AMI ,00010013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
RMSC (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
TPM (IFX0102) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout8: brightness levels: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0110 (acpiout8): LCD Panel, head 0
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 71.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 105.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu4 cpu1 cpu5 cpu2 cpu6 cpu3 cpu7
acpitz1: levels: critical 105.0 C, passive 95.0 C, passive cooling
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0150 (rev. 0x09)
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0162 (rev. 0x09)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x1e31 (USB serial bus, interface 0x30, revision 0x04) at pci0 dev 20 function 0 not configured
vendor 0x8086 product 0x1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 7 Series KT (com)
com2 at puc0 port 0: interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Realtek product 0221
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0: Intel product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa4)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
emuxki0 at pci1 dev 2 function 0: vendor 0x1102 product 0x0002 (rev. 0x07)
emuxki0: interrupting at ioapic0 pin 22
emuxki0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
emuxki0: ac97: ext id 0x200<AMAP>
audio1 at emuxki0: full duplex, playback, capture, mmap, independent
vendor 0x1102 product 0x7002 (miscellaneous input, revision 0x07) at pci1 dev 2 function 1 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1e47 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1e02 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 59 us, pow 500 mW
acpicpu0: C3: FFH, lat 80 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 77000 mW, 3401 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 77000 mW, 3400 MHz
acpicpu0: P2: FFH, lat 10 us, pow 73840 mW, 3300 MHz
acpicpu0: P3: FFH, lat 10 us, pow 67694 mW, 3100 MHz
acpicpu0: P4: FFH, lat 10 us, pow 64705 mW, 3000 MHz
acpicpu0: P5: FFH, lat 10 us, pow 61772 mW, 2900 MHz
acpicpu0: P6: FFH, lat 10 us, pow 58907 mW, 2800 MHz
acpicpu0: P7: FFH, lat 10 us, pow 53315 mW, 2600 MHz
acpicpu0: P8: FFH, lat 10 us, pow 50601 mW, 2500 MHz
acpicpu0: P9: FFH, lat 10 us, pow 47940 mW, 2400 MHz
acpicpu0: P10: FFH, lat 10 us, pow 42787 mW, 2200 MHz
acpicpu0: P11: FFH, lat 10 us, pow 40284 mW, 2100 MHz
acpicpu0: P12: FFH, lat 10 us, pow 37833 mW, 2000 MHz
acpicpu0: P13: FFH, lat 10 us, pow 35433 mW, 1900 MHz
acpicpu0: P14: FFH, lat 10 us, pow 31421 mW, 1700 MHz
acpicpu0: P15: FFH, lat 10 us, pow 29164 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3392555800 Hz quality 3000
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
ahcisata0 port 3: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD5000AAKX-60U6AA0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: GPT GUID: 846e465a-ac47-11e2-a0b1-6c3be51f98d8
dk0 at wd0: swapspace
dk0: 10485760 blocks at 34, type: swap
dk1 at wd0: homedir
dk1: 966287341 blocks at 10485794, type: ffs
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus1 drive 0
wd1: <INTEL SSDSA2UP020G3H>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 19087 MB, 38781 cyl, 16 head, 63 sec, 512 bytes/sect x 39091248 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <Hitachi HDS724040ALE640>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 3726 GB, 7752021 cyl, 16 head, 63 sec, 512 bytes/sect x 7814037168 sectors
wd2: GPT GUID: f434281a-1e13-11e2-87c2-001b21a25eb7
dk2 at wd2: f4342846-1e13-11e2-87c2-001b21a25eb7
dk2: 7814035087 blocks at 2048, type: ffs
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd3 at atabus3 drive 0
wd3: <Hitachi HDS724040ALE640>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 3726 GB, 7752021 cyl, 16 head, 63 sec, 512 bytes/sect x 7814037168 sectors
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhub2: device problem, disabling port 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio2 at pad0: half duplex, playback, capture
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs