Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2013-05-28 10:10:40
From: doug harry
Description: NetBSD 6.1amd64.mp; lenovo ideapad z560
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1 (GENERIC)
total memory = 3958 MB
avail memory = 3828 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 0914                             (Ideapad Z560                    )
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz, id 0x20655
cpu1 at mainbus0 apid 1: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz, id 0x20655
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz, id 0x20655
cpu3 at mainbus0 apid 5: Intel(R) Core(TM) i5 CPU       M 460  @ 2.53GHz, id 0x20655
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <LENOVO,CB-01   ,00000001>, AslId <    ,01000013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
acpiwmi0 at acpi0 (WMI0, PNP0C14-NVIF): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout1: brightness levels: 0 10 20 30 40 50 60 70 80 90 100
acpiout2 at acpivga0 (DVI, 0x0121): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0:   0x0121 (acpiout2): Unknown Output Device, head 0
VPC0 (VPC2004) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: LG  LION rechargeable battery
acpibat0: granularity: low->warn 0.264 Wh, warn->full 3.780 Wh
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (MSS2, SYN0728) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
PDRC (PNP0C02) at acpi0 not configured
acpitz0 at acpi0 (TZ00): cpu0 cpu1 cpu2 cpu3
acpitz0: levels: critical 127.0 C, passive 0.0 C, passive cooling
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Palm detect
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0044 (rev. 0x02)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0045 (rev. 0x02)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0a70 (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: NVIDIA GT21x HDMI
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
hdafg1 at hdaudio0: NVIDIA GT21x HDMI
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
hdafg2 at hdaudio0: NVIDIA GT21x HDMI
hdafg2: DP00 8ch: Digital Out [Jack]
hdafg2: 8ch/0ch 48000Hz PCM16*
hdafg3 at hdaudio0: NVIDIA GT21x HDMI
hdafg3: DP00 8ch: Digital Out [Jack]
hdafg3: 8ch/0ch 48000Hz PCM16*
vendor 0x8086 product 0x3b64 (miscellaneous communications, revision 0x06) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg4 at hdaudio1: Conexant CX20585
hdafg4: DAC00 2ch: HP Out [Jack]
hdafg4: ADC01 2ch: Mic In [Built-In]
hdafg4: DAC03 2ch: Speaker [Built-In]
hdafg4: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg4: full duplex, playback, capture, independent
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x05)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x3b44 (rev. 0x05)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 6
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0: Atheros 9285
ath0: interrupting at ioapic0 pin 17
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 192.2 phy 14.0 radio 12.0
ppb3 at pci0 dev 28 function 2: vendor 0x8086 product 0x3b46 (rev. 0x05)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 7
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci4 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address xx:xx:xx:xx:xx:xx
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x3b4a (rev. 0x05)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 8
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xa5)
pci6 at ppb5 bus 12
pci6: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3b09 (rev. 0x05)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b29 (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xff20ff63<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3b30 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
vendor 0x8086 product 0x3b32 (miscellaneous DASP, revision 0x05) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
pci7 at mainbus0 bus 255
pci7: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb1 at pci7 dev 0 function 0: vendor 0x8086 product 0x2c62 (rev. 0x02)
pchb2 at pci7 dev 0 function 1: vendor 0x8086 product 0x2d01 (rev. 0x02)
pchb3 at pci7 dev 2 function 0: vendor 0x8086 product 0x2d10 (rev. 0x02)
pchb4 at pci7 dev 2 function 1: vendor 0x8086 product 0x2d11 (rev. 0x02)
pchb5 at pci7 dev 2 function 2: vendor 0x8086 product 0x2d12 (rev. 0x02)
pchb6 at pci7 dev 2 function 3: vendor 0x8086 product 0x2d13 (rev. 0x02)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C2: FFH, lat 245 us, pow   350 mW
acpicpu0: P0: FFH, lat  10 us, pow 25000 mW, 2534 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 25000 mW, 2533 MHz
acpicpu0: P2: FFH, lat  10 us, pow 23390 mW, 2399 MHz
acpicpu0: P3: FFH, lat  10 us, pow 21835 mW, 2266 MHz
acpicpu0: P4: FFH, lat  10 us, pow 20334 mW, 2133 MHz
acpicpu0: P5: FFH, lat  10 us, pow 18817 mW, 1999 MHz
acpicpu0: P6: FFH, lat  10 us, pow 17351 mW, 1866 MHz
acpicpu0: P7: FFH, lat  10 us, pow 15937 mW, 1733 MHz
acpicpu0: P8: FFH, lat  10 us, pow 14528 mW, 1599 MHz
acpicpu0: P9: FFH, lat  10 us, pow 13163 mW, 1466 MHz
acpicpu0: P10: FFH, lat  10 us, pow 11835 mW, 1333 MHz
acpicpu0: P11: FFH, lat  10 us, pow 10512 mW, 1199 MHz
acpicpu0: T0: FFH, lat   1 us, pow 10512 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow  9198 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow  7884 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow  6570 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow  5256 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow  3942 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow  2628 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow  1314 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD5000BEVT-24A0RT0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <SlimtypeDVD A DS8A4S, 008190370957, JL61> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ubt0 at uhub2 port 4
ubt0: Broadcom Corp Broadcom Bluetooth 2.1 Device, rev 2.00/4.72, addr 3
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Verbatim STORE N GO, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Verbatim, STORE N GO, 5.00> disk removable
sd0: 7385 MB, 1853 cyl, 255 head, 32 sec, 512 bytes/sect x 15124992 sectors
uvideo0 at uhub3 port 3 configuration 1 interface 0: Image Processor Lenovo EasyCamera, rev 2.00/19.26, addr 4
video0 at uvideo0: Image Processor Lenovo EasyCamera, rev 2.00/19.26, addr 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
cprng sysctl: WARNING pseudorandom rekeying.
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
umass1 at uhub3 port 4 configuration 1 interface 0
umass1: SanDisk Cruzer, rev 2.00/1.00, addr 5
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <SanDisk, Cruzer, 1.03> disk removable
sd1: 7633 MB, 15509 cyl, 16 head, 63 sec, 512 bytes/sect x 15633408 sectors