Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2013-09-16 18:02:59
From: kyle
Description: O2 IP32 R5000
[ using 514480 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4-current (GENERIC-IP32) #33: Sun Sep 8 21:59:41 MDT 2013 [_EMAIL_XXXXXXXXXXXXXX]:/usr/src/sys/arch/sgi/compile/GENERIC-IP32 real mem = 268435456 (256MB) rsvd mem = 7020544 (7MB) avail mem = 237289472 (226MB) mainbus0 at root: O2 cpu0 at mainbus0: MIPS R5000 CPU rev 2.1 180 MHz, R5000 based FPC rev 1.0 cpu0: cache L1-I 32KB D 32KB 2 way, L2 512KB direct clock0 at mainbus0: int 5 macebus0 at mainbus0: crime rev 10.1 com0 at macebus0 base 0x00390000 irq 4: ns16550a, 16 byte fifo com1 at macebus0 base 0x00398000 irq 4: ns16550a, 16 byte fifo dsrtc0 at macebus0 base 0x003a0000: DS1687 macepcibr0 at macebus0 base 0x00080000 irq 7: mace rev 1 pci0 at macepcibr0 bus 0 ahc0 at pci0 dev 1 function 0 "Adaptec AIC-7880" rev 0x00: irq 8 ahc0: Host Adapter Bios disabled. Using default SCSI device parameters scsibus0 at ahc0: 16 targets, initiator 7 sd0 at scsibus0 targ 2 lun 0: <QUANTUM, ATLAS10K3_73_SCA, 120G> SCSI3 0/direct fixed eui.00e09e0003a53a2c sd0: 70007MB, 512 bytes/sector, 143374650 sectors cd0 at scsibus0 targ 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> SCSI2 5/cdrom removable ahc1 at pci0 dev 2 function 0 "Adaptec AIC-7880" rev 0x00: irq 9 ahc1: Host Adapter Bios disabled. Using default SCSI device parameters scsibus1 at ahc1: 16 targets, initiator 7 mavb0 at macebus0 base 0x00300000 irq 6: AD1843 rev 1 audio0 at mavb0 mec0 at macebus0 base 0x00280000 irq 3: MAC-110 rev 1, address [_MAC_XXXXXXXXXX] nsphy0 at mec0 phy 8: DP83840 10/100 PHY, rev. 1 mkbc0 at macebus0 base 0x00320000 irq 5 pckbd0 at mkbc0 (kbd slot) wskbd0 at pckbd0: console keyboard power0 at macebus0 irq 5 gbe0 at mainbus0: rev 1, 8MB, 1024x768 at 8 bits wsdisplay0 at gbe0 mux 1: console (std, vt100 emulation), using wskbd0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets ahc0: target 2 using 16bit transfers ahc0: target 2 synchronous at 20.0MHz, offset = 0x8 ahc0: target 2 using 16bit transfers ahc0: target 2 synchronous at 20.0MHz, offset = 0x8 boot device: sd0 root on sd0a (6f1b57995423e203.a) swap on sd0b dump on sd0b ahc0: target 2 using 16bit transfers ahc0: target 2 synchronous at 20.0MHz, offset = 0x8 ahc0: target 2 using 16bit transfers ahc0: target 2 synchronous at 20.0MHz, offset = 0x8 ahc0: target 2 using 16bit transfers ahc0: target 2 synchronous at 20.0MHz, offset = 0x8