Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2013-10-03 02:47:49
From: kyle
Description: Octane IP30 R10000
[ using 522616 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4-current (GENERIC-IP30.MP) #39: Mon Sep 30 06:14:24 MDT 2013 xxx@xxx.xxx:/usr/src/sys/arch/sgi/compile/GENERIC-IP30.MP real mem = 671088640 (640MB) rsvd mem = 1064960 (2MB) avail mem = 657309696 (626MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: Octane cpu0 at mainbus0: MIPS R10000 CPU rev 3.4 250 MHz, R10000 FPU rev 0.0 cpu0: cache L1-I 32KB D 32KB 2 way, L2 1024KB 2 way cpu1 at mainbus0: MIPS R10000 CPU rev 3.4 250 MHz, R10000 FPU rev 0.0 cpu1: cache L1-I 32KB D 32KB 2 way, L2 1024KB 2 way clock0 at mainbus0: int 5 xbow0 at mainbus0: XBow revision 4 xheart0 at xbow0 widget 8: Heart revision 5 onewire0 at xheart0 owserial0 at onewire0 "16kb EPROM" sn 00000020ce9e owserial0: "PM20250MHZ" p/n 030-1286-002, serial GPS318 xbridge0 at xbow0 widget 15: Bridge revision 4 xbpci0 at xbridge0 bus 0: 33 MHz PCI bus pci0 at xbpci0 bus 0 isp0 at pci0 dev 0 function 0 "QLogic ISP1020" rev 0x05: irq 0, xbow irq 14 isp0: board type 1040B rev 0x5, loaded firmware rev 4.66.0 scsibus1 at isp0: 16 targets, initiator 0 sym0 at scsibus1 targ 1 lun 0: <SEAGATE, ST336704LC, 0004> SCSI3 0/direct fixed serial.SEAGATE_ST336704LC_3CD1LTSM00002133HN95 sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST336704LC, 0004> SCSI3 0/direct fixed serial.SEAGATE_ST336704LC_3CD1LTSM00002133HN95 sd0: 34732MB, 512 bytes/sector, 71132960 sectors isp1 at pci0 dev 1 function 0 "QLogic ISP1020" rev 0x05: irq 1, xbow irq 13 isp1: board type 1040B rev 0x5, loaded firmware rev 4.66.0 scsibus2 at isp1: 16 targets, initiator 0 ioc0 at pci0 dev 2 function 0 "SGI IOC3" rev 0x01 onewire1 at ioc0 owmac0 at onewire1 "1kb EPROM" sn 0000013f2ac8 owmac0: Ethernet Address xx:xx:xx:xx:xx:xx owserial1 at onewire1 "16kb EPROM" sn 000000258da4 owserial1: "PWR.SPPLY.ER" p/n 060-0035-001, serial AAE8230693 owserial2 at onewire1 "16kb EPROM" sn 00000025b109 owserial2: "FP1" p/n 030-0891-003, serial 40289C ioc0: ethernet irq 2, xbow irq 12 ioc0: superio irq 4, xbow irq 11 com0 at ioc0 base 0x20178: ns16550a, 16 byte fifo com1 at ioc0 base 0x20170: ns16550a, 16 byte fifo iockbc0 at ioc0 pckbd0 at iockbc0 (kbd slot) wskbd0 at pckbd0: console keyboard iec0 at ioc0: 128KB SSRAM, address xx:xx:xx:xx:xx:xx icsphy0 at iec0 phy 1: ICS1890 10/100 PHY, rev. 3 lpt at ioc0 not configured dsrtc0 at ioc0: DS1687 "SGI Rad1" rev 0xc0 at pci0 dev 3 function 0 not configured impact0 at xbow0 widget 12: ImpactSR revision 2 wsdisplay0 at impact0 mux 1: console (std, vt100 emulation), using wskbd0 power0 at mainbus0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a swap on sd0b dump on sd0b