Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2014-02-11 01:04:47
From: mitch
Description: OpenBSD 5.4 sparc64 on Sun Ultra 80 (4x UltraSPARC II 450 MHz)
console is /pci@1f,4000/ebus@1/se@14,400000:a
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.4 (GENERIC.MP) #37: Thu Aug 1 11:55:06 MDT 2013
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 4294967296 (4096MB)
avail mem = 4215267328 (4019MB)
mainbus0 at root: Sun Ultra 80 UPA/PCI (4 X UltraSPARC-II 450MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-II (rev 10.0) @ 450.020 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-II (rev 10.0) @ 450.020 MHz
cpu1: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
cpu2 at mainbus0: SUNW,UltraSPARC-II (rev 10.0) @ 450.020 MHz
cpu2: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
cpu3 at mainbus0: SUNW,UltraSPARC-II (rev 10.0) @ 450.020 MHz
cpu3: physical 16K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
psycho0 at mainbus0 addr 0xfffb4000: SUNW,psycho, impl 0, version 4, ign 7c0
psycho0: bus range 0-0, PCI bus 0
psycho0: dvma map fe000000-ffffffff, STC0 enabled
pci0 at psycho0
ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003 ivec 0x25
"SUNW,pll" at ebus0 addr 504000-504002 not configured
uperf0 at ebus0 addr 500000-500007: model SUNW,sc-qp (0/1) ports 9
sab0 at ebus0 addr 400000-40007f ivec 0x2b: rev 3.2
sabtty0 at sab0 port 0: console
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ivec 0x29: no keyboard
comms0 at ebus0 addr 3062f8-3062ff ivec 0x2a
wsmouse0 at comms0 mux 0
lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ivec 0x22: polled
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ivec 0x23 ivec 0x24: nvaddrs 0
audio0 at audioce0
hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address [_MAC_XXXXXXXXXX]
luphy0 at hme0 phy 1: LU6612 10/100 PHY, rev. 1
siop0 at pci0 dev 3 function 0 "Symbios Logic 53c875" rev 0x14: ivec 0x7e0, using 4K of on-board RAM
scsibus0 at siop0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST318404LSUN18G, 4207> SCSI3 0/direct fixed serial.SEAGATE_ST318404LSUN18G_3BT0ZW87000021099GS5
sd0: 17274MB, 512 bytes/sector, 35378533 sectors
sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST318404LSUN18G, 4203> SCSI3 0/direct fixed serial.SEAGATE_ST318404LSUN18G_3BT26313000021277VG2
sd1: 17274MB, 512 bytes/sector, 35378533 sectors
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM6201TASUN32XCD, 1103> SCSI2 5/cdrom removable
siop1 at pci0 dev 3 function 1 "Symbios Logic 53c875" rev 0x14: ivec 0x7e6, using 4K of on-board RAM
scsibus1 at siop1: 16 targets, initiator 7
ohci0 at pci0 dev 2 function 0 "NEC USB" rev 0x43: ivec 0x7d0, version 1.0
ohci1 at pci0 dev 2 function 1 "NEC USB" rev 0x43: ivec 0x7d1, version 1.0
ehci0 at pci0 dev 2 function 2 "NEC USB" rev 0x04: ivec 0x7d2
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
"Brooktree BT878" rev 0x11 at pci0 dev 4 function 0 not configured
"Brooktree BT878 Audio" rev 0x11 at pci0 dev 4 function 1 not configured
radeonfb0 at pci0 dev 5 function 0 "ATI Radeon VE" rev 0x00
radeonfb0: SUNW,375-3126, 1152x900
wsdisplay0 at radeonfb0 mux 1
wsdisplay0: screen 0 added (std, sun emulation)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
psycho1 at mainbus0 addr 0xfffc6000: SUNW,psycho, impl 0, version 4, ign 7c0
psycho1: bus range 128-128, PCI bus 128
psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled
pci1 at psycho1
"counter-timer" at mainbus0 addr 0xfff9fc00 not configured
creator0 at mainbus0: Elite3D, model SUNW,540-3623, dac 0
wsdisplay1 at creator0 mux 1
wsdisplay1: screen 0 added (std, sun emulation)
siop0: target 0 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
siop0: target 1 now using tagged 16 bit 20.0 MHz 16 REQ/ACK offset xfers
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@1f,4000/scsi@3,0/disk@0,0
root on sd0a (fd46b859f1135111.a) swap on sd0b dump on sd0b
creator0: firmware rev 1.3.11