Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2014-05-01 02:47:39
From: nonakap
Description: ThinkPad X220
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.40 (DRMKMS) #1: Sun Apr 27 22:24:43 JST 2014
	xxx@xxx.xxx:/usr/obj.amd64/sys/arch/amd64/compile/DRMKMS
total memory = 16159 MB
avail memory = 15673 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 4290K59 (ThinkPad X220)
mainbus0 (root)
ACPI: RSDP 0xf00e0 000024 (v02 LENOVO)
ACPI: XSDT 0xdaffe120 0000AC (v01 LENOVO TP-8D    00001390 PTEC 00000002)
ACPI: FACP 0xdafe7000 0000F4 (v04 LENOVO TP-8D    00001390 PTL  00000002)
ACPI: DSDT 0xdafea000 00FA89 (v01 LENOVO TP-8D    00001390 INTL 20061109)
ACPI: FACS 0xdaf2d000 000040
ACPI: SLIC 0xdaffd000 000176 (v01 LENOVO TP-8D    00001390 PTEC 00000001)
ACPI: SSDT 0xdaffc000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 0xdaffb000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 0xdaffa000 0007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 0xdafe6000 000038 (v01 LENOVO TP-8D    00001390 PTL  00000002)
ACPI: APIC 0xdafe5000 000098 (v01 LENOVO TP-8D    00001390 PTL  00000002)
ACPI: MCFG 0xdafe4000 00003C (v01 LENOVO TP-8D    00001390 PTL  00000002)
ACPI: ECDT 0xdafe3000 000052 (v01 LENOVO TP-8D    00001390 PTL  00000002)
ACPI: ASF! 0xdafe9000 0000A5 (v32 LENOVO TP-8D    00001390 PTL  00000002)
ACPI: TCPA 0xdafe2000 000032 (v02    PTL   LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0xdafe1000 000AAB (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0xdafe0000 000996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
ACPI: DMAR 0xdafdf000 0000E8 (v01 INTEL      SNB  00000001 INTL 00000001)
ACPI: UEFI 0xdafde000 00003E (v01 LENOVO TP-8D    00001390 PTL  00000002)
ACPI: UEFI 0xdafdd000 000042 (v01 PTL      COMBUF 00000001 PTL  00000001)
ACPI: UEFI 0xdafdc000 000292 (v01 LENOVO TP-8D    00001390 PTL  00000002)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, id 0x206a7
cpu1 at mainbus0 apid 1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, id 0x206a7
cpu2 at mainbus0 apid 2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, id 0x206a7
cpu3 at mainbus0 apid 3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, id 0x206a7
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <LENOVO,TP-8D   ,00001390>, AslId <PTEC,00000002>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI: SSDT 0xdae8c018 0008C0 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 0x0 0008C0 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 0xdae8da98 000303 (v01  PmRef    ApIst 00003000 INTL 20061109)
ACPI: SSDT 0x0 000303 (v01  PmRef    ApIst 00003000 INTL 20061109)
ACPI: SSDT 0xdae8bd98 000119 (v01  PmRef    ApCst 00003000 INTL 20061109)
ACPI: SSDT 0x0 000119 (v01  PmRef    ApCst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: 5 10 20 25 30 35 40 45 50 55 60 65 70 80 90 100
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout0): Unknown Output Device, head 0
SIO (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, LEN0020) (aux port): irq 12
TPM (SMO1200) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: LGC LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, LEN0068)
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMI2, PNP0C14-2): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 99.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
WARNING: module error: vfs load failed for `acpiverbose', error 45
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge Host Bridge (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: Intel Sandy Bridge Integrated Graphics Device (rev. 0x09)
drmkms0 at i915drmkms0
drm: Memory usable by graphics device = 2048M
drm: MTRR allocation failed.  Graphics performance may suffer.
drm: Supports vblank timestamp caching Rev 1 (10.10.2010).
drm: Driver supports precise vblank timestamp query.
drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
i915drmkms0: framebuffer at 0xffff80011aac3000, size 1366x768, depth 32, stride 5504
wsdisplay0 at i915drmkms0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drmkms0: info: registered panic notifier
Intel 6 Series MEI (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 6 Series KT (com)
com2 at puc0 port 0: ioaddr 0x50b0, interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address xx:xx:xx:xx:xx:xx
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: Intel 6 Series USB (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Conexant CX20671
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0: Intel product 0x2805
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: DP02 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: Intel 6 Series PCIE (rev. 0xb4)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 6 Series PCIE (rev. 0xb4)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
ppb1: link is x1 @ 2.5Gb/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: Intel Centrino Advanced-N 6205 (rev. 0x34)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 2T2R, MoW, address xx:xx:xx:xx:xx:xx
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: Intel 6 Series PCIE (rev. 0xb4)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: Intel 6 Series PCIE (rev. 0xb4)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
ppb3: link is x1 @ 2.5Gb/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci4 dev 0 function 0: Ricoh 5U823 SD/MMC Controller (rev. 0x04)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SD Host Specification 3.0, rev.5
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
ppb4 at pci0 dev 28 function 6: Intel 6 Series PCIE (rev. 0xb4)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
pci5 at ppb4 bus 14
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci5 dev 0 function 0: NEC USB3 Host Controller (rev. 0x04)
csr: 00100006
xhci0: interrupting at ioapic0 pin 18
xhci0: xHCI version 0.96
usb1 at xhci0: USB revision 2.0
ehci1 at pci0 dev 29 function 0: Intel 6 Series USB (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
usb2 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel QM67 LPC (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: Intel 6 Series AHCI (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 4
ichsmb0 at pci0 dev 31 function 3: Intel 6 Series SMBus Controller (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev 0x4e
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C3: I/O, lat 104 us, pow   350 mW
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2801 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 2800 MHz
acpicpu0: P2: FFH, lat  10 us, pow 31470 mW, 2600 MHz
acpicpu0: P3: FFH, lat  10 us, pow 28408 mW, 2400 MHz
acpicpu0: P4: FFH, lat  10 us, pow 25469 mW, 2200 MHz
acpicpu0: P5: FFH, lat  10 us, pow 22640 mW, 2000 MHz
acpicpu0: P6: FFH, lat  10 us, pow 19923 mW, 1800 MHz
acpicpu0: P7: FFH, lat  10 us, pow 17321 mW, 1600 MHz
acpicpu0: P8: FFH, lat  10 us, pow 14824 mW, 1400 MHz
acpicpu0: P9: FFH, lat  10 us, pow 12146 mW, 1200 MHz
acpicpu0: P10: FFH, lat  10 us, pow  9871 mW, 1000 MHz
acpicpu0: P11: FFH, lat  10 us, pow  7698 mW,  800 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2791091880 Hz quality 3000
uhub0 at usb1: NetBSD xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
acpiacad0: AC adapter online.
uhub1 at usb0: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wd0 at atabus0 drive 0
wd0: <WDC WD5000LPVT-00G33T0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub4 at uhub2 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0
wd1: <Crucial_CT240M500SSD3>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
ugen0 at uhub3 port 3
ugen0: UPEK Biometric Coprocessor, rev 1.01/0.02, addr 3
umass0 at uhub4 port 2 configuration 1 interface 0
umass0: Sony Storage Media, rev 2.10/a.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Sony, Storage Media, 1.00> disk removable
sd0: fabricating a geometry
sd0: 7520 MB, 7520 cyl, 64 head, 32 sec, 512 bytes/sect x 15400960 sectors
sd0: fabricating a geometry
uvideo0 at uhub3 port 6 configuration 1 interface 0: Chicony Electronics Co., Ltd. Integrated Camera, rev 2.00/8.54, addr 4
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev 2.00/8.54, addr 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
dump_misc_init: max_paddr = 0x41e600000
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)