Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2014-06-23 17:58:18
From: msaitoh
Description: HP MicroServer Gen8 + PR#48451 patch
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.44 (GENERIC) #2: Tue Jun 24 02:38:09 JST 2014
        [_EMAIL_XXXXXXXXXXXXXXX]:/disk/sources/3NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 1885 MB
avail memory = 1814 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP ProLiant MicroServer Gen8
mainbus0 (root)
ACPI: RSDP 0xf4f00 000024 (v02 HP    )
ACPI: XSDT 0x75de6400 0000B4 (v01 HP     ProLiant 00000002   ?^D 0000162E)
ACPI: FACP 0x75de6540 0000F4 (v03 HP     ProLiant 00000002   ?^D 0000162E)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131218/tbfadt-716)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20131218/tbfadt-716)
ACPI: DSDT 0x75de6640 001C1A (v01 HP         DSDT 00000001 INTL 20030228)
ACPI: FACS 0x75de4140 000040
ACPI: SPCR 0x75de4180 000050 (v01 HP     SPCRRBSU 00000001   ?^D 0000162E)
ACPI: MCFG 0x75de4200 00003C (v01 HP     ProLiant 00000001      00000000)
ACPI: HPET 0x75de4240 000038 (v01 HP     ProLiant 00000002   ?^D 0000162E)
ACPI: FFFF 0x75de4280 000064 (v02 HP     ProLiant 00000002   ?^D 0000162E)
ACPI: SPMI 0x75de4300 000040 (v05 HP     ProLiant 00000001   ?^D 0000162E)
ACPI: ERST 0x75de4340 000230 (v01 HP     ProLiant 00000001   ?^D 0000162E)
ACPI: APIC 0x75de4580 000252 (v01 HP     ProLiant 00000002      00000000)
ACPI: FFFF 0x75de4800 000176 (v01 HP     ProLiant 00000001   ?^D 0000162E)
ACPI: BERT 0x75de4980 000030 (v01 HP     ProLiant 00000001   ?^D 0000162E)
ACPI: HEST 0x75de49c0 0000BC (v01 HP     ProLiant 00000001   ?^D 0000162E)
ACPI: FFFF 0x75de4a80 001914 (v01 HP     ProLiant 00000001   ?^D 0000162E)
ACPI: FFFF 0x75de63c0 00002D (v01 HP     ProLiant 00000001      00000000)
ACPI: SSDT 0x75de8280 000137 (v03     HP  CRSPCI0 00000002   HP 00000001)
ACPI: SSDT 0x75de83c0 000177 (v03     HP   riser0 00000002 INTL 20030228)
ACPI: SSDT 0x75de8540 0001E1 (v01     HP      pcc 00000001 INTL 20090625)
ACPI: SSDT 0x75de8740 000377 (v01     HP     pmab 00000001 INTL 20090625)
ACPI: SSDT 0x75de8ac0 000504 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz, id 0x306a9
cpu1 at mainbus0 apid 2: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz, id 0x306a9
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <HP    ,ProLiant,00000002>, AslId <  M-R^D,0000162e>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MOMB (PNP0C02) at acpi0 not configured
MI0 (IPI0001) at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (BEEP, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
PMI0 (ACPI000D) at acpi0 not configured
acpitz0 at acpi0 (THM0): cpu0
acpitz0: levels: critical 31.3 C, passive 9.8 C, passive cooling
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0150 (rev. 0x09)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0151 (rev. 0x09)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex> x16 @ 8.0Gb/s
pci1 at ppb0 bus 7
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 6 function 0: vendor 0x8086 product 0x015d (rev. 0x09)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex> x4 @ 5.0Gb/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1590 product 0x005f (miscellaneous memory) at pci2 dev 0 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1c2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 21
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ppb2 at pci0 dev 28 function 0: vendor 0x8086 product 0x1c10 (rev. 0xb5)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex> x4 @ 5.0Gb/s
pci3 at ppb2 bus 13
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x1c18 (rev. 0xb5)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
pci4 at ppb3 bus 3
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci4 dev 0 function 0: Broadcom BCM5720 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16
bge0: APE firmware NCSI[_IP_XXX]
bge0: HW config 002b10d4, 00006014, 0000aa38, 00000000 00000000
bge0: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX]
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5720C 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1 at pci4 dev 0 function 1: Broadcom BCM5720 Gigabit Ethernet
bge1: interrupting at ioapic0 pin 17
bge1: APE firmware NCSI[_IP_XXX]
bge1: HW config 002b10d4, 00006014, 0000aa38, 00000000 00000000
bge1: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX]
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 2: BCM5720C 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci0 dev 28 function 6: vendor 0x8086 product 0x1c1c (rev. 0xb5)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
pci5 at ppb4 bus 4
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1912 product 0x0014 (USB serial bus, xHCI, revision 0x03) at pci5 dev 0 function 0 not configured
ppb5 at pci0 dev 28 function 7: vendor 0x8086 product 0x1c1e (rev. 0xb5)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex> x1 @ 5.0Gb/s
ppb5: link is x1 @ 2.5Gb/s
pci6 at ppb5 bus 1
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x103c product 0x3306 (miscellaneous system, revision 0x05) at pci6 dev 0 function 0 not configured
vga0 at pci6 dev 0 function 1: vendor 0x102b product 0x0533 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x103c product 0x3307 (miscellaneous system, revision 0x05) at pci6 dev 0 function 2 not configured
uhci0 at pci6 dev 0 function 4: vendor 0x103c product 0x3300 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb1 at uhci0: USB revision 1.0
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1c26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 20
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb2 at ehci1: USB revision 2.0
ppb6 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa5)
pci7 at ppb6 bus 20
pci7: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1c54 (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it.
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1c04 (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 17
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xff32ff45<EMS,PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
isa0 at ichlpcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  96 us, pow   350 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2294916960 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x103c UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ahcisata0 port 3: device present, speed: 1.5Gb/s
wd0 at atabus3 drive 0
wd0: <GB0160CAABV>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub3 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub4 at uhub2 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
uhub5 at uhub4 port 3: vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3
uhub5: single transaction translator
uhub5: 2 ports with 1 removable, self powered
umass0 at uhub3 port 1 configuration 1 interface 0
umass0: ADATA ADATA USB Flash Drive, rev 2.10/10.75, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <ADATA, USB Flash Drive, 1.00> disk removable
sd0: fabricating a geometry
sd0: 30146 MB, 30146 cyl, 64 head, 32 sec, 512 bytes/sect x 61739008 sectors
sd0: fabricating a geometry
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: CYKB06 USB Keyboard, rev 1.10/1.01, addr 4, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1
uhidev1: CYKB06 USB Keyboard, rev 1.10/1.01, addr 4, iclass 3/1
ehci0: missed microframe, TT reset not implemented, hub might be inoperational
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1