Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2014-07-29 14:29:42
From: kusuriya
Description: AMD Athlon II x64 freebsd server acting as a NAS
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #0 r260789: Thu Jan 16 22:34:59 UTC 2014
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD Phenom(tm) 9550 Quad-Core Processor (2204.74-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f23  Family = 0x10  Model = 0x2  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3573874688 (3408 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <GBT    GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, afce0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 2ed00000 vs 4ee10000
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfdae0000-0xfdaeffff,0xfd900000-0xfd9fffff irq 18 at
 device 5.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RS780 HDA Controller> mem 0xfdafc000-0xfdafffff irq 19 at device 5.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xdf00-0xdf1f mem 0xfd7a0000-0xfd7bffff,0xfcc00000-0xfcffffff,0xfd
7fc000-0xfd7fffff irq 18 at device 0.0 on pci2
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: xx:xx:xx:xx:xx:xx
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xde00-0xde1f mem 0xfd7c0000-0xfd7dffff,0xfd000000-0xfd3fffff,0xfd
7f8000-0xfd7fbfff irq 19 at device 0.1 on pci2
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: xx:xx:xx:xx:xx:xx
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfddff000-0xfddfffff,0xfdde0000-0xfddeffff
irq 18 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1
000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: xx:xx:xx:xx:xx:xx
ahci0: <ATI IXP700 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0
xfe02f3ff irq 22 at device 17.0 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0
usbus0 on ohci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0
usbus1 on ohci1
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0
ehci0: AMD SB600/700 quirk applied
usbus2: EHCI version 1.0
usbus2 on ehci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0
usbus3 on ohci2
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0
usbus4 on ohci3
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0
ehci1: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
hdac1: <ATI SB600 HDA Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <serial bus, FireWire> at device 14.0 (no driver attached)
ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0
usbus6 on ohci4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <ATI RS690/780 HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI RS690/780 Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI RS690/780 (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC889A HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC889A (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm2: <Realtek ALC889A (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa1
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ugen2.1: <ATI> at usbus2
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <ATI> at usbus0
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen6.1: <ATI> at usbus6
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen5.1: <ATI> at usbus5
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <ATI> at usbus4
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI> at usbus3
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
(aprobe0:ahcich0:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich0:0:15:0): CAM status: Command timeout
(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
(aprobe1:ahcich2:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe1:ahcich2:0:15:0): CAM status: Command timeout
(aprobe1:ahcich2:0:15:0): Error 5, Retries exhausted
(aprobe2:ahcich3:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe2:ahcich3:0:15:0): CAM status: Command timeout
(aprobe2:ahcich3:0:15:0): Error 5, Retries exhausted
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HDS721010CLA332 JP4OA3MA> ATA-8 SATA 2.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <Hitachi HDS721010CLA332 JP4OA39C> ATA-8 SATA 2.x device
ada1: Serial Number xxxxxxxx
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad8
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <WDC WD10EARX-32N0YB0 51.0AB51> ATA-8 SATA 3.x device
ada2: Serial Number xxxxxxxx
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad10
ada3 at ata0 bus 0 scbus6 target 0 lun 0
ada3: <CF CARD Ver7.02K> CFA-5 device
ada3: Serial Number xxxxxxxx
ada3: 133.000MB/s transfers (UDMA6, PIO 512bytes)
ada3: 7623MB (15613920 512 byte sectors: 16H 63S/T 15490C)
ada3: Previously was known as ad0
uhub3: 2 ports with 2 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
uhub5: 3 ports with 3 removable, self powered
uhub6: 3 ports with 3 removable, self powered
GEOM: ada1: the primary GPT table is corrupt or invalid.
GEOM: ada1: using the secondary instead -- recovery strongly advised.
Netvsc initializing... SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1102371242 Hz quality 800
GEOM: ada2: the primary GPT table is corrupt or invalid.
GEOM: ada2: using the secondary instead -- recovery strongly advised.
GEOM: diskid/DISK-JP2921HQ23DU3A: the primary GPT table is corrupt or invalid.
GEOM: diskid/DISK-JP2921HQ23DU3A: using the secondary instead -- recovery strongly advised.
GEOM: diskid/DISK-WD-WCC0S0854020: the primary GPT table is corrupt or invalid.
GEOM: diskid/DISK-WD-WCC0S0854020: using the secondary instead -- recovery strongly advised.
Root mount waiting for: usbus5 usbus2
Root mount waiting for: usbus5 usbus2
Root mount waiting for: usbus5 usbus2
uhub0: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
lagg0: link state changed to UP
igb1: link state changed to DOWN
igb0: link state changed to DOWN
lagg0: link state changed to DOWN
igb1: link state changed to UP
lagg0: link state changed to UP
igb0: link state changed to UP
ugen0.2: <CPS> at usbus0
(ada3:ata0:0:0:0): WRITE_DMA. ACB: ca 00 aa dc 59 40 00 00 00 00 08 00
(ada3:ata0:0:0:0): CAM status: Command timeout
(ada3:ata0:0:0:0): Retrying command
(ada3:ata0:0:0:0): WRITE_DMA. ACB: ca 00 0a 5e 59 40 00 00 00 00 08 00
(ada3:ata0:0:0:0): CAM status: Command timeout
(ada3:ata0:0:0:0): Retrying command
(ada3:ata0:0:0:0): WRITE_DMA. ACB: ca 00 8a 81 59 40 00 00 00 00 08 00
(ada3:ata0:0:0:0): CAM status: Command timeout
(ada3:ata0:0:0:0): Retrying command
(ada3:ata0:0:0:0): WRITE_DMA. ACB: ca 00 c2 63 6c 40 00 00 00 00 08 00
(ada3:ata0:0:0:0): CAM status: Command timeout
(ada3:ata0:0:0:0): Retrying command
(ada3:ata0:0:0:0): WRITE_DMA. ACB: ca 00 7a 7a 7a 40 00 00 00 00 08 00
(ada3:ata0:0:0:0): CAM status: Command timeout
(ada3:ata0:0:0:0): Retrying command
(ada3:ata0:0:0:0): WRITE_DMA. ACB: ca 00 ca d9 7a 40 00 00 00 00 08 00
(ada3:ata0:0:0:0): CAM status: Command timeout
(ada3:ata0:0:0:0): Retrying command
(ada3:ata0:0:0:0): WRITE_DMA. ACB: ca 00 4a fe 5d 40 00 00 00 00 08 00
(ada3:ata0:0:0:0): CAM status: Command timeout
(ada3:ata0:0:0:0): Retrying command
(ada3:ata0:0:0:0): WRITE_DMA. ACB: ca 00 42 3f 5d 40 00 00 00 00 08 00
(ada3:ata0:0:0:0): CAM status: Command timeout
(ada3:ata0:0:0:0): Retrying command
ugen0.2: <CPS> at usbus0 (disconnected)
ugen0.2: <CPS> at usbus0