Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2014-08-01 11:11:39
From: peter_ljung
Description: Fujitsu Siemens Futro S400 (TR53A0)
OpenBSD 5.5-current (GENERIC) #208: Tue Jul 8 12:02:10 MDT 2014
[_EMAIL_XXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) 1.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW
real mem = 519532544 (495MB)
avail mem = 498614272 (475MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/14/07, BIOS32 rev. 0 @ 0xfaa30, SMBIOS rev. 2.2 @ 0xf0000 (31 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00PG Rev. 4.00.0H" date 02/14/2007
bios0: FUJITSU SIEMENS FUTRO S400
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices USB0(S5) USB1(S5) USB2(S5) USB3(S5) AMR0(S4) UAR1(S5) UAR2(S5) PS2M(S5) PS2K(S4) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: PSS
acpitz0 at acpi0acpitz0: THRM: failed to read _TMP
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x4000!
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: PowerNow! K7 1001 MHz: speeds: 1000 800 667 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "SiS 86C202 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TS4GCF133>
wd0: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 10, SiS7012 AC97
ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 9, version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 3, version 1.0, legacy support
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 5
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
re0 at pci0 dev 9 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), irq 15, address [_MAC_XXXXXXXXXX]
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (2d1c1552cbc24891.a) swap on wd0b dump on wd0b
hw.sensors.lm1.temp0=125.00 degC
hw.sensors.lm1.volt0=0.06 VDC (VCore)
hw.sensors.lm1.volt1=0.06 VDC (+3.3V)
hw.sensors.lm1.volt2=4.95 VDC (+5V)
hw.sensors.lm1.volt3=0.24 VDC (+12V)
hw.sensors.lm1.volt4=-14.58 VDC (-12V)
hw.sensors.lm1.volt5=-7.51 VDC (-5V)
hw.sensors.lm1.volt6=4.90 VDC (5VSB)
hw.sensors.lm1.volt7=3.25 VDC (VBAT)