Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2014-08-01 11:27:16
From: peter_ljung
Description: VIA EPIA-EK8000EG, Luke/800Mhz,Mini-ITX, 2 LAN
OpenBSD 5.5-current (GENERIC) #5: Wed Jun 25 16:20:13 CEST 2014
cpu0: VIA Samuel 2 ("CentaurHauls" 686-class) 602 MHz
real mem  = 234323968 (223MB)
avail mem = 218054656 (207MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/01/03, BIOS32 rev. 0 @ 0xfaff0, SMBIOS rev. 2.2 @ 0xf0800 (26 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date 08/01/2003
bios0: VIA Technologies, Inc. VT8623-8235
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices PCI0(S5) USB0(S5) USB1(S5) USB2(S5) USB3(S3) USB4(S3) USB5(S3) USB6(S3) LAN0(S5) AC97(S5) UAR1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGPB)
acpicpu0 at acpi0: C3, C2
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xe000 0xd0000/0x8000! 0xd8000/0x9800
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
viaagp0 at pchb0: v2
agp0 at viaagp0: aperture at 0xe6000000, size 0xf000000
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vr0 at pci0 dev 15 function 0 "VIA VT6105 RhineIII" rev 0x8b: irq 12, address [_MAC_XXXXXXXXXX]
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 9: OUI 0x004063, model 0x0034
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 9
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00: SMI
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2700CL2.5
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1600AAJB-00PVA0>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 9
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr1 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address [_MAC_XXXXXXXXXX]
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 5: OUI 0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
viasio0 at isa0 port 0x2e/2: VT1211 rev 0x02, HM, WDG not activated
viasio1 at isa0 port 0x4e/2: VT1211 rev 0x02, HM not activated, WDG not activated
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (f0e85fb73d33781e.a) swap on wd0b dump on wd0b
hw.sensors.viasio0.temp0=1.59 degC
hw.sensors.viasio0.fan1=2647 RPM
hw.sensors.viasio0.volt0=3.40 VDC (UCH1)
hw.sensors.viasio0.volt1=2.42 VDC (UCH2)
hw.sensors.viasio0.volt2=2.05 VDC (UCH3)
hw.sensors.viasio0.volt3=4.76 VDC (UCH4)
hw.sensors.viasio0.volt4=11.78 VDC (UCH5)
hw.sensors.viasio0.volt5=3.35 VDC (+3.3V)