Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2014-08-02 19:09:41
From: peter_ljung
Description: Intel Desktop Board D945GCLF
OpenBSD 5.5 (GENERIC.MP) #262: Wed Mar 5 10:06:29 MST 2014 xxx@xxx.xxx:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF real mem = 1061855232 (1012MB) avail mem = 1032175616 (984MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/14/08, SMBIOS rev. 2.4 @ 0xe3590 (23 entries) bios0: vendor Intel Corp. version "LF94510J.86A.0103.2008.0814.1910" date 08/14/2008 bios0: Intel Corporation D945GCLF acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AC9M(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.1.0.0.0, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU 230 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (P32_) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus -1 (PEX1) acpiprt4 at acpi0: bus 2 (PEX2) acpiprt5 at acpi0: bus 3 (PEX3) acpiprt6 at acpi0: bus -1 (PEX4) acpiprt7 at acpi0: bus -1 (PEX5) acpicpu0 at acpi0 acpicpu1 at acpi0 acpibtn0 at acpi0: SLPB bios0: ROM list: 0xc0000/0xae00! 0xcb000/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02 intagp0 at vga1 agp0 at intagp0: aperture at 0x40000000, size 0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1280x1024 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17 pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi, address xx:xx:xx:xx:xx:xx rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 2 int 18 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 2 int 19 pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19 uhci2 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 pci4 at ppb3 bus 4 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, CD-R PREMIUM, 1.02> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 19 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <WDC WD10EADS-00L5B1> wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 wd1 at pciide1 channel 1 drive 0: <WDC WD10EARS-00MVWB0> wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19 iic0 at ichiic0 admtm0 at iic0 addr 0x2d: 47m192 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a swap on wd0b dump on wd0b hw.sensors.cpu0.temp0=27.00 degC hw.sensors.admtm0.temp0=32.00 degC (Internal) hw.sensors.admtm0.temp1=45.00 degC (External) hw.sensors.admtm0.temp2=35.00 degC (External) hw.sensors.admtm0.volt0=2.53 VDC (2.5 V) hw.sensors.admtm0.volt1=0.00 VDC (Vccp) hw.sensors.admtm0.volt2=3.37 VDC (3.3 V) hw.sensors.admtm0.volt3=5.10 VDC (5 V) hw.sensors.admtm0.volt4=-10.18 VDC (12 V) hw.sensors.admtm0.volt5=3.39 VDC (Vcc) hw.sensors.admtm0.volt6=1.57 VDC (1.5 V) hw.sensors.admtm0.volt7=1.77 VDC (1.8 V)