Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2014-08-07 13:14:21
From: Eric van Gyzen
Description: Dell Precision Workstation T5500
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p12 #0: Tue Apr 29 22:02:25 UTC 2014
    xxx@xxx.xxx:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Xeon(R) CPU           E5606  @ 2.13GHz (2128.05-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206c2  Family = 6  Model = 2c  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 12884901888 (12288 MB)
avail memory = 12366901248 (11793 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   B10K   >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID: 32
 cpu1 (AP): APIC ID: 34
 cpu2 (AP): APIC ID: 50
 cpu3 (AP): APIC ID: 52
 cpu4 (AP): APIC ID:  0
 cpu5 (AP): APIC ID:  2
 cpu6 (AP): APIC ID: 18
 cpu7 (AP): APIC ID: 20
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic2: Changing APIC ID to 10
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
lapic32: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80bf5a10, 0) error 6
acpi0: <DELL B10K   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 28 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xf6000000-0xf6ffffff,0xe8000000-0xebffffff,0xf4000000-0xf5ffffff irq 24 at device 0.0 on pci5
nvidia0: <Quadro NVS 420> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
pcib6: <PCI-PCI bridge> at device 2.0 on pci4
pci6: <PCI bus> on pcib6
vgapci1: <VGA-compatible display> port 0xcc80-0xccff mem 0xf1000000-0xf1ffffff,0xec000000-0xefffffff,0xf2000000-0xf3ffffff irq 35 at device 0.0 on pci6
nvidia1: <Quadro NVS 420> on vgapci1
vgapci1: child nvidia1 requested pci_enable_io
vgapci1: child nvidia1 requested pci_enable_io
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x1f20-0x1f3f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x1f00-0x1f1f irq 17 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1c00-0x1c1f irq 22 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xf7ffa000-0xf7ffa3ff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac0: <Intel 82801JI HDA Controller> mem 0xf7ffc000-0xf7ffffff irq 16 at device 27.0 on pci0
pcib8: <PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib9
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5761100> mem 0xf0ce0000-0xf0ceffff,0xf0cf0000-0xf0cfffff irq 17 at device 0.0 on pci9
bge0: CHIP ID 0x05761100; ASIC REV 0x5761; CHIP REV 0x57611; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5761 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: xx:xx:xx:xx:xx:xx
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1f80-0x1f9f irq 23 at device 29.0 on pci0
usbus4 on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1f60-0x1f7f irq 17 at device 29.1 on pci0
usbus5 on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1f40-0x1f5f irq 18 at device 29.2 on pci0
usbus6 on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xff980000-0xff9803ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib10
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8 AHCI SATA controller> port 0x1e00-0x1e07,0x1e10-0x1e13,0x1e20-0x1e27,0x1e30-0x1e33,0x1ec0-0x1edf mem 0xff970000-0xff9707ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0xece0-0xecff mem 0xf7ffb000-0xf7ffb0ff irq 20 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
pcib11: <ACPI Host-PCI bridge> on acpi0
pcib11: Length mismatch for 3 range: 10001 vs 20000
pci32: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci32
pci34: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> irq 16 at device 9.0 on pci32
pci35: <ACPI PCI bus> on pcib13
pci32: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci32: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci32: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
qpi0: <QPI system bus> on motherboard
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd07ff,0xd0800-0xd2fff,0xd3000-0xd8fff,0xd9000-0xdbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x3f4 offMax=0x704
hdacc0: <Analog Devices AD1984A HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1984A Audio Function Group> at nid 1 on hdacc0
pcm0: <Analog Devices AD1984A (Analog)> at nid 18 and 20 on hdaa0
pcm1: <Analog Devices AD1984A (Analog)> at nid 17 and 21 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD2500AAJS-75M0A0 02.03E02> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <WDC WD2500AAJS-75M0A0 02.03E02> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
cd0 at ahcich2 bus 0 scbus2 target 0 lun 0
cd0: <PLDS DVD-ROM DH-16D5S VD15> Removable CD-ROM SCSI-0 device 
lapic52: Forcing LINT1 to edge trigger
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #3 Launched!
lapic2: Forcing LINT1 to edge trigger
cd1 at ahcich3 bus 0 scbus3 target 0 lun 0
cd1: <HL-DT-ST DVD+-RW GH70N A101> Removable CD-ROM SCSI-0 device 
cd1: 150.000MB/s transfers (SATA 1.x, UDMA5, SMP: AP CPU #5 Launched!
ATAPI 12bytes, lapic34: Forcing LINT1 to edge trigger
PIO 8192bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic50: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic0: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
Timecounter "TSC-low" frequency 16625388 Hz quality 1000
GEOM_MIRROR: Device mirror/swap launched (2/2).
Trying to mount root from zfs:root1/ROOT/main []...
ugen0.2: <Logitech> at usbus0
ugen5.2: <Prolific Technology Inc.> at usbus5
uplcom0: <Prolific Technology Inc. USB-Serial Controller D, class 0/0, rev 1.10/3.00, addr 2> on usbus5
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 2> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
ugen6.2: <DELL> at usbus6
ukbd0: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 2> on usbus6
kbd2 at ukbd0