Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2014-09-11 06:00:57
From: Makoto Fujiwara
Description: IBM,7046-B50 (NetBSD/7.99.1) netboot -> SATA
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.1 (WD0A) #0: Thu Sep 11 11:47:34 JST 2014
        root@z87:/export/netbsd-src/sys/arch/ofppc/compile/obj/WD0A
Model: IBM,7046-B50
total memory = 256 MB
avail memory = 239 MB
kern.module.path=/stand/ofppc/7.99.1/modules
timecounter: Timecounters tick every 10.000 msec
bootpath: /pci@80000000/ethernet@c/netbsd.ofppc
mainbus0 (root)
rtas0 at mainbus0: version 1, entry @pa 0x6d66dc
cpu0 at mainbus0: 604e (Revision 1.2), ID 0 (primary)
cpu0: HID0 0xc001c086<EMCP,DBP,NHR,ICE,DCE,SGE,BHT,NOPDST>, powersave: 1
cpu0: 375.00 MHz
cpu0: L1 I-cache 32 KB 32B/line, D-cache 32 KB 32B/line
cpu0: L2 cache 1 MB 32B/line
ofwpci0 at mainbus0
Found openpic at f8e40000
OpenPIC Version 1.1: Supports 4 CPUs and 16 interrupt sources.
Switching to COM console at speed 9600
pci0 at ofwpci0 bus 0: OFW method configuration space access
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1057 product 0x0002 (rev. 0x40)
pchb0: L2 cache: 1M, internally controlled write-back mode
pcib0 at pci0 dev 11 function 0: vendor 0x10ad product 0x0565 (rev. 0x10)
pcib0:
pciide0 at pci0 dev 11 function 1: vendor 0x10ad product 0x0105 (rev. 0x05)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: couldn't map native-PCI interrupt
pciide0: secondary channel configured to native-PCI mode
pciide0: couldn't map native-PCI interrupt
pcn0 at pci0 dev 12 function 0: AMD PCnet-PCI Ethernet
pcn0: Am79c971 PCnet-FAST rev 6, Ethernet address [_MAC_XXXXXXXXXX]
pcn0: interrupting at irq 22
nsphy0 at pcn0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0 at pcn0 phy 31: OUI 0x000058, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, auto
vendor 0x1014 product 0x0046 (undefined, subclass 0x00) at pci0 dev 13 function 0 not configured
esiop0 at pci0 dev 16 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 23
scsibus0 at esiop0: 16 targets, 8 luns per target
siisata0 at pci0 dev 18 function 0: vendor 0x1095 product 0x3124 (rev. 0x02)
siisata0: interrupting at irq 18
siisata0: SiI3124, 3.0Gb/s
siisata0: 32-bit -1MHz PCI-X
atabus2 at siisata0 channel 0
atabus3 at siisata0 channel 1
atabus4 at siisata0 channel 2
atabus5 at siisata0 channel 3
genfb0 at pci0 dev 22 function 0: vendor 0x102b product 0x0520 (rev. 0x01)
genfb0: unable to map the framebuffer
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
vmmask 39000000 schedmask 39000000 highmask 7f000000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 20781424 Hz quality 100
scsibus0: waiting 2 seconds for devices to settle...
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
siisata0 port 3: device present, speed: 1.5Gb/s
wd1 at atabus5 drive 0
wd1: <Maxtor 6L080M0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
dk0 at wd1: wd1a
dk0: 1024128 blocks at 22621, type: 4.2BSD
dk1 at wd1: wd1b
dk1: 8389584 blocks at 1046749, type: swap
dk2 at wd1: wd1e
dk2: 20480 blocks at 63, type: MSDOS
dk3 at wd1: wd1f
dk3: 30 blocks at 20543, type: unknown
dk4 at wd1: wd1g
dk4: 2048 blocks at 20573, type: boot
dk5 at wd1: wd1h
dk5: 6144768 blocks at 9436333, type: 4.2BSD
dk6 at wd1: wd1i
dk6: 6144768 blocks at 15581101, type: 4.2BSD
dk7 at wd1: wd1j
dk7: 134575619 blocks at 21725869, type: 4.2BSD
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(siisata0:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
boot device: pcn0
device wd0 (0xa00) not configured
root device (default pcn0): dk0
dump device: dk1
file system (default generic): 
root on dk0 dumps on dk1
root file system type: ffs
init path (default /sbin/init): 
init: trying /sbin/init