Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2014-09-23 12:37:09
From: phx
Description: Supermicro PDSM4+ Xeon 3050 Adaptec RAID 3405
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.4_PATCH (TETHYS) #0: Wed Jun 18 15:42:49 CEST 2014
        frank@tethys:/home/frank/netbsd/6.1/src/objx64/sys/arch/amd64/compile/TETHYS
total memory = 8190 MB
avail memory = 7944 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Supermicro PDSM4+ (0123456789)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU            3050  @ 2.13GHz, id 0x6f2
cpu1 at mainbus0 apid 1: Intel(R) Xeon(R) CPU            3050  @ 2.13GHz, id 0x6f2
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xfecc0000, version 20, 24 pins
ioapic2 at mainbus0 apid 4: pa 0xfecc0400, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MBRD (PNP0C02) at acpi0 not configured
pcppi0 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer0 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
FWH (INT0800) at acpi0 not configured
pckbc0 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc1 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
com0 at acpi0 (COM1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com1 at acpi0 (COM2, PNP0501-2): io 0x2f8-0x2ff irq 3
com1: ns16550a, working fifo
fdc0 at acpi0 (FDC, PNP0700-1): io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc0: failed to evaluate _FDE: AE_NOT_FOUND
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer0: attached to pcppi0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel E7230 Host (rev. 0xc0)
ppb0 at pci0 dev 1 function 0: Intel E7230 PCI Express Bridge (rev. 0xc0)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: Intel 6700PXH PCI Express-to-PCI Bridge #0 (rev. 0x09)
ppb1: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Intel product 0x0326 (interrupt system, interface 0x20, revision 0x09) at pci1 dev 0 function 1 not configured
ppb2 at pci1 dev 0 function 2: Intel 6700PXH PCI Express-to-PCI Bridge #1 (rev. 0x09)
ppb2: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
Intel product 0x0327 (interrupt system, interface 0x20, revision 0x09) at pci1 dev 0 function 3 not configured
ppb3 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 14
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci4 dev 0 function 0: Intel IOP333 PCI Express-to-PCI Bridge #0 (rev. 0x00)
ppb4: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci5 at ppb4 bus 15
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
aac0 at pci5 dev 14 function 0: Adaptec RAID 3405
aac0: interrupting at ioapic0 pin 18
aac0: Enabling 64-bit address support
aac0: Enable 64-bit array support
aac0: New comm. interface enabled
aac0: XScale 80321 at 500MHz, 128MB mem (111MB cache), optional battery not installed
aac0: Kernel 5.2-0 [Build 15323], Monitor 5.2-0 [Build 15323], S/N 12CB1D
aac0: Controller supports: 0x7f1d7d<SNAPSHOT,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD>
ld0 at aac0 unit 0: RAID 1 (Mirror)
ld0: 464 GB, 60700 cyl, 255 head, 63 sec, 512 bytes/sect x 975155200 sectors
ppb5 at pci4 dev 0 function 2: Intel IOP333 PCI Express-to-PCI Bridge #1 (rev. 0x00)
ppb5: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci6 at ppb5 bus 16
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 28 function 4: Intel 82801GB/GR PCI Express Port #5 (rev. 0x01)
ppb6: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 18
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci7 dev 0 function 0: Intel i82573E IAMT (rev. 0x03)
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address xx:xx:xx:xx:xx:xx
makphy0 at wm0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb7 at pci0 dev 28 function 5: Intel 82801GB/GR PCI Express Port #6 (rev. 0x01)
ppb7: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci8 at ppb7 bus 19
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci8 dev 0 function 0: Intel i82573L Gigabit Ethernet (rev. 0x00)
wm1: interrupting at ioapic0 pin 17
wm1: PCI-Express bus
wm1: 256 word (8 address bits) SPI EEPROM
wm1: Ethernet address xx:xx:xx:xx:xx:xx
makphy1 at wm1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb8 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xe1)
pci9 at ppb8 bus 20
pci9: i/o space, memory space enabled
vga0 at pci9 dev 4 function 0: ATI Technologies ES1000 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI ES1000 RN50
radeondrm0: Initialized radeon 1.29.0 20080613
ichlpcib0 at pci0 dev 31 function 0: Intel 82801GB/GR LPC Interface Bridge (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x01)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2128094080 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVD-ROM GDR-H30N, , 1.00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
uhub3 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs