Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2014-12-31 01:04:43
From: gdt
Description: MacBook4,1 (Core2Duo White Macbook)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0_BETA (GENERIC) #12: Mon Oct 20 15:28:43 EDT 2014
[_EMAIL_XXXXXXXXXXX]:/u0/n0/obj/gdt-7/i386/sys/arch/i386/compile/GENERIC
total memory = 3036 MB
avail memory = 2971 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Apple Inc. MacBook4,1 (1.0)
mainbus0 (root)
ACPI: RSDP 0xfe020 000024 (v02 APPLE )
ACPI: XSDT 0xbeeee1c0 000084 (v01 APPLE Apple00 000000C1 01000013)
ACPI: FACP 0xbeeec000 0000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
ACPI: DSDT 0xbeee1000 0045C6 (v01 APPLE MacBook 00040001 INTL 20061109)
ACPI: FACS 0xbeecc000 000040
ACPI: HPET 0xbeeeb000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: APIC 0xbeeea000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: MCFG 0xbeee9000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ASF! 0xbeee8000 0000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SBST 0xbeee7000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: ECDT 0xbeee6000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
ACPI: SSDT 0xbeec7000 0004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0xbeec6000 00025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0xbeec5000 0000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
ACPI: SSDT 0xbeee0000 000544 (v01 SataRe SataPri 00001000 INTL 20061109)
ACPI: SSDT 0xbeedf000 000477 (v01 SataRe SataSec 00001000 INTL 20061109)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, id 0x10676
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <APPLE , Apple00,000000c1>, AslId < ,01000013>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI: SSDT 0xbeecaa98 0002FE (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x0 0002FE (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0xbeec8c18 0002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 0x0 0002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 0xbeec9f18 0000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
ACPI: SSDT 0x0 0000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
ACPI: SSDT 0xbeec8f18 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
ACPI: SSDT 0x0 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09): using acpiecdt0
acpiacad0 at acpi0 (ADP1, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
PNLF (APP0002) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout1 at acpivga0 (VGA, 0x0300): ACPI Display Output Device
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Int. Digital Flat Panel, index 0, port 0, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV/HDTV Monitor, index 0, port 0, head 0, bios detect
acpivga0: 0x0300 (acpiout1): Ext. Digital Monitor, index 0, port 0, head 0, bios detect
SMC (APP0001) at acpi0 not configured
SMS0 (APP0003) at acpi0 not configured
SBS0 (ACPI0002) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
MATH (PNP0C04) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 5 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a00 (rev. 0x03)
agp0 at pchb0: i965-family chipset
agp0: detected 15868k stolen memory
agp0: aperture at 0xc0000000, size 0x20000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x03)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i965GM
i915drm0: AGP at 0xc0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 16
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x04)
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 20
hdafg0 at hdaudio0: Realtek ALC885
hdafg0: ADC00 2ch: Mic In [Built-In]
hdafg0: ADC01 2ch: Line In [Jack]
hdafg0: DIG-In02 2ch: SPDIF In [Jack]
hdafg0: DAC03 4ch: Speaker [Built-In]
hdafg0: DAC04 2ch: HP Out [Jack]
hdafg0: DIG05 2ch: SPDIF Out [Jack]
hdafg0: 4ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x04)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x04)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bwi0 at pci2 dev 0 function 0: Broadcom Wireless
bwi0: interrupting at ioapic0 pin 16
bwi0: BBP id 0x4321, BBP rev 0x3, BBP pkg 0
bwi0: MAC: rev 12
bwi0: bus regwin already exists
bwi0: PHY type 4, rev 2, ver 5
bwi0: unsupported PHY type 4
ppb2 at pci0 dev 28 function 5: vendor 0x8086 product 0x2849 (rev. 0x04)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0, Yukon-2 EC Ultra rev. B0 (0x3): ioapic0 pin 17
msk0 at mskc0 port A: Ethernet address [redacted]
makphy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x04)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x04)
uhci3: interrupting at ioapic0 pin 18
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x04)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf4)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 3 function 0: vendor 0x11c1 product 0x5811 (rev. 0x61)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 [redacated]
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2815 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 21 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2: Intel 82801HEM Serial ATA Controller (ICH8M) (rev. 0x04)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 18 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 20
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 32000 mW, 2100 MHz
acpicpu0: P1: FFH, lat 10 us, pow 32000 mW, 2000 MHz
acpicpu0: P2: FFH, lat 10 us, pow 27750 mW, 1800 MHz
acpicpu0: P3: FFH, lat 10 us, pow 23500 mW, 1600 MHz
acpicpu0: P4: FFH, lat 10 us, pow 19250 mW, 1400 MHz
acpicpu0: P5: FFH, lat 10 us, pow 15000 mW, 1200 MHz
acpicpu0: P6: FFH, lat 10 us, pow 14300 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 14300 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 12512 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 10725 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8937 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 7150 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 5362 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3575 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1787 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
uhub2 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
uhub4 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
cd0 at atapibus0 drive 0: <MATSHITADVD-R UJ-867, HG04A7D6, HB01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
ehci0: handing over full speed device on port 1 to uhci0
urtwn0 at uhub3 port 1
urtwn0: Realtek 802.11n WLAN Adapter, rev 2.00/2.00, addr 2
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address [redacted]
urtwn0: 1 rx pipe, 2 tx pipes
urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wd0 at atabus2 drive 0
wd0: <FUJITSU MHY2120BH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: vendor 0x05ac product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: vendor 0x05ac product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse0 at ums0 mux 0
ugen0 at uhub3 port 4
ugen0: vendor 0x05ac product 0x8300, rev 2.00/0.0c, addr 3
ehci1: handing over low speed device on port 5 to uhci4
ehci1: handing over full speed device on port 6 to uhci4
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock gained 6 days
uhidev2 at uhub6 port 1 configuration 1 interface 0
uhidev2: Apple Computer, Inc. IR Receiver, rev 2.00/0.16, addr 2, iclass 3/0
uhidev2: 38 report ids
uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0
uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0
uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0
uhidev3 at uhub6 port 2 configuration 1 interface 0
uhidev3: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/1
ukbd1 at uhidev3
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev4 at uhub6 port 2 configuration 1 interface 1
uhidev4: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/1
uhidev4: 5 report ids
ums1 at uhidev4 reportid 2: 3 buttons
wsmouse1 at ums1 mux 0
uhid3 at uhidev4 reportid 5: input=63, output=0, feature=16
uhidev5 at uhub6 port 2 configuration 1 interface 2
uhidev5: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.07, addr 3, iclass 3/0
uhid4 at uhidev5: input=1, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)