Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2015-02-02 23:50:37
From: R0B_ROD
Description: HP 2B19WM AMD64 E-300 4GB RAM
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014 amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "efifb".
CPU: AMD E-300 APU with Radeon(tm) HD Graphics (1297.67-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x500f20  Family = 0x14  Model = 0x2  Stepping = 0
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  TSC: P-state invariant, performance statistics
real memory  = 4412407808 (4208 MB)
avail memory = 3697303552 (3526 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HPQOEM 188B    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80d942e0, 0) error 19
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xefffffff,0xf0400000-0xf043ffff at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x1314) HDA Controller> mem 0xf0444000-0xf0447fff at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x3118-0x311f,0x3124-0x3127,0x3110-0x3117,0x3120-0x3123,0x3100-0x310f mem 0xf044c000-0xf044c7ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xf044b000-0xf044bfff at device 18.0 on pci0
usbus0 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf044a000-0xf044a0ff at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xf0449000-0xf0449fff at device 19.0 on pci0
usbus2 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf0448000-0xf04480ff at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xf0440000-0xf0443fff at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x40800000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: xx:xx:xx:xx:xx:xx
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci7: <ACPI PCI bus> on pcib4
ath0: <Atheros AR9485> mem 0xf0200000-0xf027ffff at device 0.0 on pci7
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci8: <ACPI PCI bus> on pcib5
pci8: <unknown> at device 0.0 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa1
pcm2: <Realtek ALC269 (Onboard Analog Mic)> at nid 18 on hdaa1
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <AMD> at usbus0
uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AMD> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <AMD> at usbus2
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <AMD> at usbus3
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD3200BPVT-60JJ5T0 01.01A01> ATA-8 SATA 2.x device
ada0: Serial Number xxxxxxxx
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
uhub0: 5 ports with 5 removable, self powered
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <hp DVD A  DS8A9SH EH61> Removable CD-ROM SCSI-0 device 
cd0: Serial Number xxxxxxxx
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub2: 5 ports with 5 removable, self powered
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1297668110 Hz quality 800
Root mount waiting for: usbus3 usbus1
Root mount waiting for: usbus3 usbus1
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3
ugen3.2: <Generic> at usbus3
Trying to mount root from ufs:/dev/ada0p2 [rw]...
wlan0: Ethernet address: xx:xx:xx:xx:xx:xx