Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2015-02-07 00:06:28
From: LinuXo
Description: AMD Duron 900+
OpenBSD 5.6 (GENERIC) #5: Thu Dec 11 11:38:13 CET 2014
    [_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/binpatchng/work-binpatch56-i386/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron(tm) Processor ("AuthenticAMD" 686-class, 64KB L2 cache) 893 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,MMXX,3DNOW2,3DNOW
real mem  = 259551232 (247MB)
avail mem = 242860032 (231MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/09/02, BIOS32 rev. 0 @ 0xfdae0, SMBIOS rev. 2.3 @ 0xf0630 (23 entries)
bios0: vendor American Megatrends Inc. version "062710" date 07/15/97
acpi at bios0 function 0x0 not configured
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8350/96 (4 entries)
pcibios0: PCI Interrupt Router at 000:01:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x8000!
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 730 PCI" rev 0x02
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xd0000000, size 0x4000000
pciide0 at pci0 dev 0 function 1 "SiS 5513 EIDE" rev 0xd0: 730: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 1: <SAMSUNG WNR-31601A (1600MB)>
wd0: 16-sector PIO, LBA, 1536MB, 3145968 sectors
wd0(pciide0:0:1): using PIO mode 4, DMA mode 2
wd1 at pciide0 channel 1 drive 0: <ST320413A>
wd1: 16-sector PIO, LBA, 19458MB, 39851760 sectors
wd2 at pciide0 channel 1 drive 1: <ST320413A>
wd2: 16-sector PIO, LBA, 19458MB, 39851760 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
pcib0 at pci0 dev 1 function 0 "SiS 85C503 System" rev 0x00
sis0 at pci0 dev 1 function 1 "SiS 900 10/100BaseTX" rev 0x82: irq 5, address [_MAC_XXXXXXXXXX]
ukphy0 at sis0 phy 0: Generic IEEE 802.3u media interface, rev. 5: OUI 0x004063, model 0x0032
ohci0 at pci0 dev 1 function 2 "SiS 5597/5598 USB" rev 0x07: irq 11, version 1.0, legacy support
ohci1 at pci0 dev 1 function 3 "SiS 5597/5598 USB" rev 0x07: irq 11, version 1.0, legacy support
autri0 at pci0 dev 1 function 4 "SiS 7018 Audio" rev 0x02: irq 10
ac97: codec id 0x56494161 (VIA Technologies VT1612A)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
ppb0 at pci0 dev 2 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6300" rev 0x31
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 12, address [_MAC_XXXXXXXXXX]
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 5, address [_MAC_XXXXXXXXXX]
rlphy1 at rl1 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8705F rev 2, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed
sd0: 19453MB, 512 bytes/sector, 39840608 sectors
root on wd0a (055d34290f5b670b.a) swap on wd0b dump on wd0b