Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-03-12 16:40:48
From: AaronB
Description: Sun Netra AC-200 w/ Intel Gigabit NIC, Netboot
ign 7c0 bus range 0 to 2; PCI bus 0
psycho_alloc_extent: no "available" property
psycho_alloc_extent: no "available" property
pci0 at psycho0
pci0: i/Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.1.5 (NETRAT1) #0: Wed Dec 24 19:14:16 EST 2014
root@focus:/usr/src/sys/arch/sparc64/compile/NETRAT1
total memory = 1536 MB
avail memory = 1494 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,UltraAX-i2 (Netra T1 200): [_HOSTID_XXXXX]
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, UPA id 0
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0
psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
psycho_alloc_extent: no "available" property
psycho_alloc_extent: no "available" property
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 12 function 0
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
lom0 at ebus0 addr 200000-200003 ipl 2a: SUNW,lomh: LOMlite2 rev 3.10
lom0: 4 fan(s), 1 PSU(s), 1 temp sensor(s)
lom0: Watchdog timer configured.
alipm0 at pci1 dev 3 function 0: 74KHz clock
iic0 at alipm0: I2C bus
admtemp0 at iic0 addr 0x18: ADM1021 or compatible environmental sensor
spdmem0 at iic0 addr 0x54
spdmem0: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133)
spdmem0: 13 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-45
spdmem0: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x55
spdmem1: SDRAM (registered), data ECC, 512MB, 133MHz (PC-133)
spdmem1: 13 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-45
spdmem1: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
spdmem2 at iic0 addr 0x56
spdmem2: SDRAM (registered), data ECC, 256MB, 133MHz (PC-133)
spdmem2: 12 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
spdmem2: tAA-tRCD-tRP-tRAS: 3-20-20-44
spdmem2: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem3 at iic0 addr 0x57
spdmem3: SDRAM (registered), data ECC, 256MB, 133MHz (PC-133)
spdmem3: 12 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
spdmem3: tAA-tRCD-tRP-tRAS: 3-20-20-44
spdmem3: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
i2c-nvram at iic0 addr 0x50 not configured
motherboard-fru at iic0 addr 0x51 not configured
ebus1 at pci1 dev 7 function 0
ebus1: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
power at ebus1 addr 2000-2007 ipl 25 not configured
com0 at ebus1 addr 3f8-3ff ipl 2b: ns16550a, working fifo
com0: console
com1 at ebus1 addr 2e8-2ef ipl 2b: ns16550a, working fifo
gem0 at pci1 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 3006
ukphy0 at gem0 phy 1: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: Ethernet address [_MAC_XXXXXXXXXX], 2KB RX fifo, 2KB TX fifo
ohci0 at pci1 dev 12 function 3: Sun Microsystems USB Controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
aceride0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
gem1 at pci1 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem1: interrupting at ivec 301c
ukphy1 at gem1 phy 1: OUI 0x0008bb, model 0x0002, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem1: Ethernet address [_MAC_XXXXXXXXXX], 2KB RX fifo, 2KB TX fifo
ohci1 at pci1 dev 5 function 3: Sun Microsystems USB Controller (rev. 0x01)
ohci1: interrupting at ivec 26
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
esiop0 at pci2 dev 8 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ivec 1820
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci2 dev 8 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at ivec 1820
scsibus1 at esiop1: 16 targets, 8 luns per target
wm0 at pci2 dev 5 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02)
wm0: interrupting at ivec 15
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 500000000 Hz quality 100
No counter-timer -- using %tick at 500MHz as system clock.
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
uhub0 at usb0: Sun Microsystems OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: Sun Microsystems OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
cd0 at atapibus0 drive 0: <CD-224E, , 1.7A> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
root on wm0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server:[_IP_XXXXXXXXX]
nfs_boot: my_name=focus
nfs_boot: my_addr=192.168.102.7
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.102.1
root on endure:/netfs/focus
warning: no /dev/console