NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

---

Date: 2015-03-31 00:50:22
From: Sevan / Venture37
Description: SPARC Enterprise T5120

console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.6-stable (SUNNY.MP) #0: Mon Mar 23 08:45:03 EDT 2015
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/SUNNY.MP
real mem = 16106127360 (15360MB)
avail mem = 15842476032 (15108MB)
mainbus0 at root: SPARC Enterprise T5120
cpu0 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu1 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu2 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu3 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu4 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu5 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu6 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
cpu7 at mainbus0: SUNW,UltraSPARC-T2 (rev 0.0) @ 1165.379 MHz
vbus0 at mainbus0
"flashprom" at vbus0 not configured
"tpm" at vbus0 not configured
cbus0 at vbus0
vldc0 at cbus0
vldcp0 at vldc0 chan 0x14: ivec 0x228, 0x229 channel "spds"
"sunvts" at vldc0 chan 0x6 not configured
"sunmc" at vldc0 chan 0x7 not configured
"explorer" at vldc0 chan 0x8 not configured
"led" at vldc0 chan 0x9 not configured
"flashupdate" at vldc0 chan 0xa not configured
"ipmi" at vldc0 chan 0xc not configured
"system-management" at vldc0 chan 0xd not configured
vldc1 at cbus0
"spfma" at vldc1 chan 0x5 not configured
vldc2 at cbus0
vldcp1 at vldc2 chan 0x0: ivec 0x200, 0x201 channel "hvctl"
"ldom-primary" at vldc2 chan 0x1 not configured
"fmactl" at vldc2 chan 0x3 not configured
vldcp2 at vldc2 chan 0x19: ivec 0x232, 0x233 channel "ldom-nbsdcur"
vldcp3 at vldc2 chan 0x1d: ivec 0x23a, 0x23b channel "ldom-obsdcur"
vldc3 at cbus0
"ldmfma" at vldc3 chan 0x4 not configured
"virtual-domain-service" at cbus0 not configured
vcc0 at cbus0
vcctty0 at vcc0 chan 0x18: ivec 0x230, 0x231 domain "nbsdcur"
vcctty1 at vcc0 chan 0x1c: ivec 0x238, 0x239 domain "obsdcur"
vds0 at cbus0
vdsp0 at vds0 chan 0x1a: ivec 0x234, 0x235
vdsp1 at vds0 chan 0x1e: ivec 0x23c, 0x23d
vsw0 at cbus0
vnet0 at vsw0 chan 0x1b: ivec 0x236, 0x237
vnet1 at vsw0 chan 0x1f: ivec 0x23e, 0x23f
vrng0 at vbus0
vcons0 at vbus0: ivec 0x111, console
vrtc0 at vbus0
vpci0 at mainbus0: bus 2 to 18, dvma map 80000000-ffffffff
pci0 at vpci0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8533" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "PLX PEX 8517" rev 0xac
pci3 at ppb2 bus 5
ppb3 at pci3 dev 1 function 0 "PLX PEX 8517" rev 0xac
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "PLX PEX 8112" rev 0xaa
pci5 at ppb4 bus 7
ohci0 at pci5 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x16, version 1.0
ohci1 at pci5 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x17, version 1.0
ehci0 at pci5 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x14
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ppb5 at pci3 dev 2 function 0 "PLX PEX 8517" rev 0xac
pci6 at ppb5 bus 8
em0 at pci6 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x17, address 00:21:28:
em1 at pci6 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x14, address 00:21:28:
ppb6 at pci3 dev 3 function 0 "PLX PEX 8517" rev 0xaa
pci7 at ppb6 bus 9
em2 at pci7 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x14, address 00:21:28:
em3 at pci7 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x15, address 00:21:28:
ppb7 at pci1 dev 2 function 0 "PLX PEX 8533" rev 0xaa
pci8 at ppb7 bus 10
mpi0 at pci8 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x04: msi
mpi0: UNUSED, firmware[_IP_XXX]
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST914603SSUN146G, 0768> SCSI3 0/direct fixed naa.5000c50005bafc9b
sd0: 140009MB, 512 bytes/sector, 286739329 sectors
sd1 at scsibus0 targ 1 lun 0: <HITACHI, H101414SCSUN146G, SA25> SCSI3 0/direct fixed naa.5000cca00093fc44
sd1: 140009MB, 512 bytes/sector, 286739329 sectors
sd2 at scsibus0 targ 2 lun 0: <SEAGATE, ST914603SSUN146G, 0768> SCSI3 0/direct fixed naa.5000c50005b9de4f
sd2: 140009MB, 512 bytes/sector, 286739329 sectors
sd3 at scsibus0 targ 3 lun 0: <SEAGATE, ST9146852SS, 0004> SCSI3 0/direct fixed naa.5000c5001713ee6b
sd3: 140014MB, 512 bytes/sector, 286749488 sectors
ppb8 at pci1 dev 8 function 0 "PLX PEX 8533" rev 0xaa
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "PLX PEX 8533" rev 0xaa
pci10 at ppb9 bus 12
ppb10 at pci10 dev 1 function 0 "PLX PEX 8533" rev 0xaa: msi
pci11 at ppb10 bus 13
ppb11 at pci10 dev 2 function 0 "PLX PEX 8533" rev 0xaa: msi
pci12 at ppb11 bus 14
ppb12 at pci10 dev 8 function 0 "PLX PEX 8533" rev 0xaa: msi
pci13 at ppb12 bus 15
ppb13 at pci10 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci14 at ppb13 bus 16
ppb14 at pci10 dev 10 function 0 "PLX PEX 8533" rev 0xaa: msi
pci15 at ppb14 bus 17
ppb15 at pci1 dev 9 function 0 "PLX PEX 8533" rev 0xaa: msi
pci16 at ppb15 bus 18
"niu" at mainbus0 not configured
"pci-performance-counters" at mainbus0 not configured
ebus0 at mainbus0
com0 at ebus0 addr ca0000-ca0007 ivec 0x13: ns16550a, 16 byte fifo
umass0 at uhub0 port 2 configuration 1 interface 0 "Texas Instruments Incorporated 6250 FW:[_IP_XXXXXX].562AD423" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd0 at scsibus1 targ 1 lun 0: <TSSTcorp, CD/DVDW TS-T632A, SR03> SCSI0 5/cdrom removable serial.
uhub3 at uhub0 port 4 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@0,0/pci@0,0/pci@2,0/scsi@0,0/disk@0,0
root on sd0a (61c6c7b910f7a1e1.a) swap on sd0b dump on sd0b

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2024 NYC*BUG.