Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2015-05-20 15:03:32
From: msaitoh
Description: Shuttle DS57U
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.17 (GENERIC) #33: Wed May 20 23:59:22 JST 2015
	msaitoh@curusb:/disk/sources/NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 3980 MB
avail memory = 3845 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Shuttle Inc. DS57U (V1.0)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0580 000024 (v02 Shuttl)
ACPI: XSDT 0x00000000DA6E7088 000094 (v01 Shuttl Shuttle  01072009 AMI  00010013)
ACPI: FACP 0x00000000DA6FB2F0 00010C (v05 Shuttl Shuttle  01072009 AMI  00010013)
ACPI: DSDT 0x00000000DA6E71B8 014133 (v02 DS57U0 DS57UV10 01072009 INTL 20120913)
ACPI: FACS 0x00000000DAD22F80 000040
ACPI: APIC 0x00000000DA6FB400 000068 (v03 Shuttl Shuttle  01072009 AMI  00010013)
ACPI: FPDT 0x00000000DA6FB468 000044 (v01 Shuttl Shuttle  01072009 AMI  00010013)
ACPI: FIDT 0x00000000DA6FB4B0 00009C (v01 Shuttl Shuttle  01072009 AMI  00010013)
ACPI: MCFG 0x00000000DA6FB550 00003C (v01 Shuttl Shuttle  01072009 MSFT 00000097)
ACPI: HPET 0x00000000DA6FB590 000038 (v01 Shuttl Shuttle  01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DA6FB5C8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DA6FB8E0 000042 (v01                 00000000      00000000)
ACPI: SSDT 0x00000000DA6FB928 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
ACPI: ASF! 0x00000000DA6FC5A8 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: SLIC 0x00000000DA6FC648 000176 (v01 Shuttl Shuttle  01072009 AMI  00010013)
ACPI: SSDT 0x00000000DA6FC7C0 0004B5 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: SSDT 0x00000000DA6FCC78 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
ACPI: SSDT 0x00000000DA6FD7F0 005CF6 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Celeron(R) 3205U @ 1.50GHz, id 0x306d4
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Celeron(R) 3205U @ 1.50GHz, id 0x306d4
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 40 pins
acpi0 at mainbus0: Intel ACPICA 20150410
acpi0: X/RSDT: OemId <Shuttl,Shuttle ,01072009>, AslId <AMI ,00010013>
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8107114410 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81071E2010 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE81071196D0 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)
acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
SIO1 (PNP0C02) at acpi0 not configured
com0 at acpi0 (UAR1, PNP0501-0): io 0x3f8-0x3ff irq 3
com0: ns16550a, working fifo
com1 at acpi0 (UAR2, PNP0501-1): io 0x2f8-0x2ff irq 4
com1: ns16550a, working fifo
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
SIRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 71.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 50.0C
acpitz0: active cooling level 3: 45.0C
acpitz0: active cooling level 4: 40.0C
acpitz0: levels: critical 105.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 105.0 C, passive 95.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-646)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 1604 (rev. 0x08)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 1606 (rev. 0x08)
drm: Memory usable by graphics device = 4096M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: failed to retrieve link info, disabling eDP
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
i915drmkms0: More than 8 outputs detected via ACPI
intelfb0: framebuffer at 0xffff800047143000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: RIRB timeout
hdaudio0: RIRB timeout
vendor 8086 product 9cb1 (USB serial bus, xHCI, revision 0x03) at pci0 dev 20 function 0 not configured
vendor 8086 product 9cba (miscellaneous communications, revision 0x03) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: I218 LM Ethernet Connection (rev. 0x03)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address xx:xx:xx:xx:xx:xx
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 5
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg0 at hdaudio1: vendor 10ec product 0662
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: DIG01 2ch: SPDIF Out [Built-In]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 8086 product 9c90 (rev. 0xe3)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 2: vendor 8086 product 9c94 (rev. 0xe3)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci2 dev 0 function 0: I211 Ethernet (COPPER) (rev. 0x03)
wm1: interrupting at ioapic0 pin 18
wm1: PCI-Express bus
wm1: 64 words iNVM
wm1: Ethernet address xx:xx:xx:xx:xx:xx
wm1: Copper
ukphy0 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 3: vendor 8086 product 9c96 (rev. 0xe3)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 10ec product 8179 (miscellaneous network, revision 0x01) at pci3 dev 0 function 0 not configured
ehci0 at pci0 dev 29 function 0: vendor 8086 product 9ca6 (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 9cc5 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 9c83 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 2 ports, 32 slots, CAP 0xc734ff01<PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 9ca2 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x52: SMD-N4G28H1P-16KL 
spdmem0: DDR3 SDRAM, no ECC, no temp-sensor, 4GB, 1600MHz (PC3-12800)
spdmem0: 13 rows, 13 cols, 8 log. banks, 1 phys. banks, 1.250ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 10-10-10-28
spdmem0: 1.5V 1.35V operable
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat  67 us, pow   500 mW
acpicpu0: P0: FFH, lat  10 us, pow 15000 mW, 1501 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 15000 mW, 1500 MHz
acpicpu0: P2: FFH, lat  10 us, pow 13791 mW, 1400 MHz
acpicpu0: P3: FFH, lat  10 us, pow 12607 mW, 1300 MHz
acpicpu0: P4: FFH, lat  10 us, pow 11593 mW, 1200 MHz
acpicpu0: P5: FFH, lat  10 us, pow 10456 mW, 1100 MHz
acpicpu0: P6: FFH, lat  10 us, pow  9343 mW, 1000 MHz
acpicpu0: P7: FFH, lat  10 us, pow  8396 mW,  900 MHz
acpicpu0: P8: FFH, lat  10 us, pow  7329 mW,  800 MHz
acpicpu0: P9: FFH, lat  10 us, pow  6286 mW,  700 MHz
acpicpu0: P10: FFH, lat  10 us, pow  5401 mW,  600 MHz
acpicpu0: P11: FFH, lat  10 us, pow  4402 mW,  500 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu1: lapic_set_lvt: WARNING: bad pin value 12
timecounter: Timecounter "TSC" frequency 1496608880 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <ST9160821AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub1 at uhub0 port 1: vendor 8087 product 8001, class 9/0, rev 2.00/0.03, addr 2
uhub1: single transaction translator
uhub1: 8 ports with 8 removable, self powered
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: ADATA ADATA USB Flash Drive, rev 2.10/10.75, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <ADATA, USB Flash Drive, 1.00> disk removable
sd0: fabricating a geometry
sd0: 30146 MB, 30146 cyl, 64 head, 32 sec, 512 bytes/sect x 61739008 sectors
sd0: fabricating a geometry
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Darfon USB Optical Mouse, rev 1.10/3.00, addr 4, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 4 configuration 1 interface 0
uhidev1: CYKB06 USB Keyboard, rev 1.10/1.01, addr 5, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub1 port 4 configuration 1 interface 1
uhidev2: CYKB06 USB Keyboard, rev 1.10/1.01, addr 5, iclass 3/1
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhub2 at uhub1 port 5: vendor 05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 6
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
umass1 at uhub2 port 2 configuration 1 interface 0
umass1: Generic USB Storage, rev 2.00/94.54, addr 7
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <Generic, STORAGE DEVICE, 9454> disk removable
sd1: drive offline
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.17/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
cpu 0: ucode 0x13->0x18
cpu 1: ucode 0x13->0x18