Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2015-05-29 06:06:05
From: brycec
Description: Axiomtek box (model unknown), OpenBSD 5.5 (5.6 panicked on bsd.rd)
OpenBSD 5.5 (GENERIC) #4: Thu Dec 11 10:42:06 CET 2014
    [_EMAIL_XXXXXXXXXXXXXXXXXXXX]:/binpatchng/work-binpatch55-i386/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel" 686-class) 1.50 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF
real mem  = 534212608 (509MB)
avail mem = 513179648 (489MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/28/09, BIOS32 rev. 0 @ 0xfb240, SMBIOS rev. 2.2 @ 0xf0800 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 08/28/2009
acpi at bios0 function 0x0 not configured
apm0 at bios0: Power Management spec V1.2 (slowidle)
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
mpbios0: bus 0 is type PCI   
mpbios0: bus 1 is type PCI   
mpbios0: bus 2 is type ISA   
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x8000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
pci_intr_map: bus 0 dev 30 func 0 pin 1; line 5
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 2; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 3; line 10
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 30 func 0 pin 4; line 12
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 1
fxp0 at pci1 dev 4 function 0 "Intel 8255x" rev 0x10, i82551: apic 2 int 19, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci1 dev 5 function 0 "Intel 8255x" rev 0x10, i82551: apic 2 int 18, address [_MAC_XXXXXXXXXX]
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
fxp2 at pci1 dev 6 function 0 "Intel 8255x" rev 0x10, i82551: apic 2 int 17, address [_MAC_XXXXXXXXXX]
inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4
fxp3 at pci1 dev 7 function 0 "Intel 8255x" rev 0x10, i82551: apic 2 int 16, address [_MAC_XXXXXXXXXX]
inphy3 at fxp3 phy 1: i82555 10/100 PHY, rev. 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9160314AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x02: apic 2 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2100CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x4e/2: W83627HF rev 0x41
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhub3 at uhub0 port 1 "GenesysLogic USB2.0 Hub" rev 2.00/90.30 addr 2
uplcom0 at uhub3 port 1 "Prolific Technology Inc. USB-Serial Controller D" rev 1.10/4.00 addr 3
ucom0 at uplcom0
uplcom1 at uhub3 port 2 "Prolific Technology Inc. USB-Serial Controller D" rev 1.10/4.00 addr 4
ucom1 at uplcom1
uplcom2 at uhub3 port 3 "Prolific Technology Inc. USB-Serial Controller D" rev 1.10/4.00 addr 5
ucom2 at uplcom2
uhub4 at uhub3 port 4 "GenesysLogic USB2.0 Hub" rev 2.00/90.30 addr 6
uplcom3 at uhub4 port 1 "Prolific Technology Inc. USB-Serial Controller D" rev 1.10/4.00 addr 7
ucom3 at uplcom3
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (ef5b3a0ab00940f5.a) swap on wd0b dump on wd0b