Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2015-06-21 13:00:35
From: kaashif
Description: IBM System x3455
OpenBSD 5.7-current (GENERIC.MP) #1038: Wed Jun 3 01:46:18 MDT 2015
xxx@xxx.xxx:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12867076096 (12271MB)
avail mem = 12473274368 (11895MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xcff6c000 (45 entries)
bios0: vendor IBM version "IBM BIOS Version 1.43-[C0E143AUS-1.43]-" date 05/06/2009
bios0: IBM IBM System x3455-[7984W20]-
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SRAT SLIT SSDT APIC
acpi0: wakeup devices RTC_(S5) PPBX(S5) EXB0(S5) EXB3(S5) PWRB(S5)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2218, 2593.84 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 2218, 2593.50 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 4 pa 0xfec02000, version 11, 16 pins
acpiprt0 at acpi0: bus 2 (PPBX)
acpiprt1 at acpi0: bus 1 (PXB_)
acpiprt2 at acpi0: bus 3 (EXB0)
acpiprt3 at acpi0: bus 4 (EXB1)
acpiprt4 at acpi0: bus 5 (EXB2)
acpiprt5 at acpi0: bus 6 (EXB3)
acpiprt6 at acpi0: bus 7 (EXB4)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiprt8 at acpi0: bus 128 (PCI1)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xc0
pci2 at ppb1 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 3 int 2, address xx:xx:xx:xx:xx:xx
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 3 int 1, address xx:xx:xx:xx:xx:xx
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
pciide0: using apic 2 int 7 for native-PCI interrupt
pciide0: port 0: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <Hitachi HDS721616PLA380>
wd0: 16-sector PIO, LBA48, 157066MB, 321672960 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: port 1: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <WDC WD5000BEKT-75KA9T0>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: port 2: PHY offline
pciide0: port 3: PHY offline
piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
iic0 at piixpm0
pciide1 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 2 int 10, version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 2 int 10, version 1.0, legacy support
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 2 int 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ServerWorks EHCI root hub" rev 2.00/1.00 addr 1
radeondrm0 at pci0 dev 5 function 0 "ATI ES1000" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 3 int 0
ppb2 at pci0 dev 6 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci3 at ppb2 bus 3
ppb3 at pci0 dev 7 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci4 at ppb3 bus 4
ppb4 at pci0 dev 8 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci5 at ppb4 bus 5
ppb5 at pci0 dev 9 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci6 at ppb5 bus 6
ppb6 at pci0 dev 10 function 0 "ServerWorks HT-2100 PCIE" rev 0xa2
pci7 at ppb6 bus 7
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev JH-F2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1
pci8 at mainbus0 bus 128
uhub3 at uhub0 port 3 "Standard Microsystems Hub" rev 2.00/0.01 addr 2
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.01 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub1 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.01 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (9e594013d0d8441f.a) swap on wd0b dump on wd0b
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r100_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
drm:pid0:r100_startup *ERROR* failed initializing CP (-2).
drm:pid0:r100_init *ERROR* Disabling GPU acceleration
radeondrm0: 1360x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)