Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2015-06-28 18:25:54
From: ajcc
Description: NetBSD/sparc64 7.0_RC1 on Ultra1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_RC1 (GENERIC.201506190427Z)
total memory = 192 MB
avail memory = 171 MB
kern.module.path=/stand/sparc64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,Ultra-1 (Sun Ultra 1 SBus): hostid xxxxxxxx
cpu0 at mainbus0: SUNW,UltraSPARC @ 143 MHz, CPU id 0
cpu0: manuf 17, impl 10, mask 22
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/l)
timer0 at mainbus0 addr 0xfffc3c00 irq vectors 7f0
sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 8: CS4231A
audio0 at audiocs0: full duplex, playback, capture
auxio0 at sbus0 slot 15 offset 0x1900000
flashprom at sbus0 slot 15 offset 0x0 not configured
fdc0 at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12zstty2 at zs1 channel 0
kbd0 at zstty2
zstty3 at zs1 channel 1
ms0 at zstty3
wsmouse0 at ms0 mux 0
sc at sbus0 slot 15 offset 0x1300000 not configured
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
dma0 at sbus0 slot 14 offset 0x8400000: DMA rev 2
esp0 at dma0 slot 14 offset 0x8800000 vector 20 ipl 3: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
ledma0 at sbus0 slot 14 offset 0x8400010: DMA rev 2
le0 at ledma0 slot 14 offset 0x8c00000 vector 21 ipl 6: address xx:xx:xx:xx:xx:xx
le0: 8 receive buffers, 2 transmit buffers
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: DMA rev 2
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 143000000 Hz quality 100
timecounter: Timecounter "counter-timer" frequency 1000000 Hz quality 200
scsibus0: waiting 2 seconds for devices to settle...
wskbd0 at kbd0 mux 1
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST32155W SUN2.1G, 8856> disk fixed
sd0: 2049 MB, 4177 cyl, 8 head, 125 sec, 512 bytes/sect x 4197405 sectors
sd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 2 lun 0: <DEC, RZ28M    (C) DEC, 0466> disk fixed
sd1(esp0:0:2:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Initialization Command Required
     FRU CODE:  0x2

sd1: drive offline
sd1: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
sd2 at scsibus0 target 3 lun 0: <DEC, RZ29B    (C) DEC, 0014> disk fixed
sd2: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd2: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
sd3 at scsibus0 target 4 lun 0: <DEC, RZ28M    (C) DEC, 0466> disk fixed
sd3(esp0:0:4:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Initialization Command Required
     FRU CODE:  0x2

sd3: drive offline
sd3: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
sd4 at scsibus0 target 5 lun 0: <DEC, RZ29B    (C) DEC, 0014> disk fixed
sd4(esp0:0:5:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Initialization Command Required
     FRU CODE:  0x2

sd4: drive offline
sd4: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
kbd0: reset failed
Kernelized RAIDframe activated
sd1: no disk label
sd2: no disk label
sd3: no disk label
sd4: no disk label
root on sd0a dumps on sd0b
root file system type: ffs