Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-07-04 22:25:19
From: tsutsui
Description: NetBSD/i386 7.0_RC1 on VirtualBox 4.3.26
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0_RC1 (GENERIC.201506190427Z)
total memory = 3583 MB
avail memory = 3508 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
innotek GmbH VirtualBox (1.2)
mainbus0 (root)
ACPI: RSDP 0xe0000 000024 (v02 VBOX )
ACPI: XSDT 0xdfff0030 000034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0xdfff00f0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0xdfff0410 001BF1 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0xdfff0200 000040
ACPI: SSDT 0xdfff0240 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <VBOX ,VBOXXSDT,00000001>, AslId <ASL ,00000061>
LNKB: ACPI: Found matching pin for 0.2.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 10
LNKD: ACPI: Found matching pin for 0.4.INTA at func 0: 9
LNKA: ACPI: Found matching pin for 0.5.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.6.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.7.INTA at func 0: 9
LNKC: BIOS IRQ 9 for 0.7.INTA does not match previous BIOS IRQ 10
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
LPT (PNP0400) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (VGA, 0x0100): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 2 GPEs in block 00 to 07
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131218/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x1237 (rev. 0x02)
pcib0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7000 (rev. 0x00)
piixide0 at pci0 dev 1 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
vga0 at pci0 dev 2 function 0: vendor 0x80ee product 0xbeef (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02)
wm0: interrupting at irq 10
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: MDIC read timed out: phy 0 reg 1
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x80ee product 0xcafe (miscellaneous system) at pci0 dev 4 function 0 not configured
auich0 at pci0 dev 5 function 0: i82801AA (ICH) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: SigmaTel STAC9700 codec; no 3D stereo
auich0: ac97: ext id 0x809<AC97_23,VRM,VRA>
ohci0 at pci0 dev 6 function 0: vendor 0x106b product 0x003f (rev. 0x00)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 0: vendor 0x8086 product 0x7113 (rev. 0x08)
piixpm0: SMBus disabled
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
attimer1: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
auich0: ac97 link rate calibration timed out after 1178007 us
audio0 at auich0: full duplex, playback, capture, mmap, independent
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x106b OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0
wd0: <VBOX HARDDISK>
wd0: drive supports 128-sector PIO transfers, LBA addressing
wd0: 3820 MB, 7761 cyl, 16 head, 63 sec, 512 bytes/sect x 7823360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <VBOX CD-ROM, VB2-01700376, 1.0> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs