Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2015-07-17 19:17:51
From: ajcc
Description: NetBSD/i386 7.0_RC1 on Thinkpad T43
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_RC1 (GENERIC.201506190427Z)
total memory = 2046 MB
avail memory = 1996 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
IBM 2668R1G (ThinkPad T43)
mainbus0 (root)
ACPI: RSDP 0xf6c00 000024 (v02 IBM   )
ACPI: XSDT 0x7fee6fe7 00005C (v01 IBM    TP-1Y    00001290  LTP 00000000)
ACPI: FACP 0x7fee7100 0000F4 (v03 IBM    TP-1Y    00001290 IBM  00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20131218/tbfadt-634)
ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20131218/tbfadt-664)
ACPI: DSDT 0x7fee72e7 00DB15 (v01 IBM    TP-1Y    00001290 MSFT 0100000E)
ACPI: FACS 0x7fef6000 000040
ACPI: SSDT 0x7fee72b4 000033 (v01 IBM    TP-1Y    00001290 MSFT 0100000E)
ACPI: ECDT 0x7fef4dfc 000052 (v01 IBM    TP-1Y    00001290 IBM  00000001)
ACPI: TCPA 0x7fef4e4e 000032 (v01 IBM    TP-1Y    00001290 PTL  00000001)
ACPI: APIC 0x7fef4e80 00005A (v01 IBM    TP-1Y    00001290 IBM  00000001)
ACPI: MCFG 0x7fef4eda 00003C (v01 IBM    TP-1Y    00001290 IBM  00000001)
ACPI: BOOT 0x7fef4fd8 000028 (v01 IBM    TP-1Y    00001290  LTP 00000001)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) M processor 1.86GHz, id 0x6d8
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <IBM   ,TP-1Y   ,00001290>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
FPU (PNP0C04) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
FDC (PNP0700) at acpi0 not configured
ECP (PNP0401) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0
acpivga0:   0x0200 (acpiout2): TV, head 0
acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0
acpitz0 at acpi0 (THM0): cpu0
acpitz0: levels: critical 99.0 C, passive 94.5 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2590 (rev. 0x03)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2591 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 0x1002 product 0x5460 (rev. 0x00)
radeon0: unable to reserve VGA registers for i386 radeondrmkms hack
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci2 dev 0 function 0: Broadcom BCM5751M Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16
bge0: HW config 00080155, 00004015, 00000038, 00000000 00000000
bge0: ASIC BCM5750 B1 (0x4101), Ethernet address xx:xx:xx:xx:xx:xx
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x03)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd3)
pci4 at ppb3 bus 11
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0x8d)
iwi0 at pci4 dev 2 function 0: vendor 0x8086 product 0x4220 (rev. 0x05)
iwi0: interrupting at ioapic0 pin 21
iwi0: 802.11 address xx:xx:xx:xx:xx:xx
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 12
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio
auich0: interrupting at ioapic0 pin 22
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 0x601<AC97_22,AMAP,VRA>
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2641 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 2: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x266a (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
lpt2 at isa0 port 0x3bc-0x3bf irq : polled
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   1 us, pow  1000 mW
acpicpu0: C2: I/O, lat   1 us, pow   500 mW
acpicpu0: C3: I/O, lat  85 us, pow   250 mW
acpicpu0: P0: FFH, lat 500 us, pow 27000 mW, 1866 MHz
acpicpu0: P1: FFH, lat 500 us, pow 23700 mW, 1600 MHz
acpicpu0: P2: FFH, lat 500 us, pow 20400 mW, 1333 MHz
acpicpu0: P3: FFH, lat 500 us, pow 17100 mW, 1066 MHz
acpicpu0: P4: FFH, lat 500 us, pow 13800 mW,  800 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <WDC WD2500BEVE-00A0HT0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4247N, , 1.01> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
drm: initializing kernel modesetting (RV380 0x1002:0x5460 0x1014:0x056E).
drm: register mmio base: 0xb0100000
drm: register mmio size: 65536
drm: Generation 2 PCI interface, using max accessible memory
radeon0: info: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (64M used)
radeon0: info: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: Detected VRAM RAM=80M, BAR=128M
drm: RAM width 64bits DDR
Zone  kernel: Available graphics memory: 796144 kiB
drm: radeon: 64M of VRAM memory ready
drm: radeon: 512M of GTT memory ready.
drm: GART: num cpu pages 131072, num gpu pages 131072
drm: radeon: 1 quad pipes, 1 Z pipes initialized.
drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x00000000a0000000 and cpu addr 0x0xdba2e000
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 16 (radeon)
drm: radeon: irq initialized.
drm: Loading R300 Microcode
WARNING: clock gained 10 days
drm: radeon: ring at 0x00000000A0001000
drm: ring test succeeded in 1 usecs
drm: ib test succeeded in 0 usecs
drm: Panel ID String: 1024x768                
drm: Panel Size 1024x768
drm: Radeon Display Connectors
drm: Connector 0:
drm:   VGA-1
drm:   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
drm:   Encoders:
drm:     CRT1: INTERNAL_DAC1
drm: Connector 1:
drm:   DVI-D-1
drm:   HPD1
drm:   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
drm:   Encoders:
drm:     DFP1: INTERNAL_TMDS1
drm: Connector 2:
drm:   LVDS-1
drm:   Encoders:
drm:     LCD1: INTERNAL_LVDS
drm: Connector 3:
drm:   SVIDEO-1
drm:   Encoders:
drm:     TV1: INTERNAL_DAC2
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xdbc50000, size 1024x768, depth 32, stride 4096
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)