Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-08-20 09:15:13
From: nonakap
Description: Shuttle DS47 (serial console)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.21 (KOHARU) #0: Thu Aug 20 11:56:32 JST 2015
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXX]:/home/snapshot/NetBSD/20150715/obj.NetBSD-amd64/amd64/sys/arch/amd64/compile/KOHARU
total memory = 8079 MB
avail memory = 7826 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Shuttle Inc. DS47D (V1.0)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0490 000024 (v02 Shuttl)
ACPI: XSDT 0x00000000DA80A078 00006C (v01 Shuttl Shuttle 01072009 AMI 00010013)
ACPI: FACP 0x00000000DA813F00 00010C (v05 Shuttl Shuttle 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DA80A178 009D82 (v02 DS47D0 DS47DV10 00000000 INTL 20051117)
ACPI: FACS 0x00000000DAC24080 000040
ACPI: APIC 0x00000000DA814010 000062 (v03 Shuttl Shuttle 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DA814078 000044 (v01 Shuttl Shuttle 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DA8140C0 00003C (v01 Shuttl Shuttle 01072009 MSFT 00000097)
ACPI: SLIC 0x00000000DA814100 000176 (v01 Shuttl Shuttle 01072009 AMI 00010013)
ACPI: HPET 0x00000000DA814278 000038 (v01 Shuttl Shuttle 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DA8142B0 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DA8145C8 000692 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DA814C60 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz, id 0x206a7
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Celeron(R) CPU 847 @ 1.10GHz, id 0x206a7
acpi0 at mainbus0: Intel ACPICA 20150717
acpi0: X/RSDT: OemId <Shuttl,Shuttle ,01072009>, AslId <AMI ,00010013>
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810E6D9010 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810E677410 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810E64A590 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)
acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
MEM2 (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 86.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 101.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 101.0 C, passive 86.0 C, passive cooling
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150717/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150717/hwxface-646)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: MCFG: segment 0, bus 0-63, base address 0x00000000f8000000
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge Host Bridge (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: Intel Sandy Bridge Integrated Graphics Device (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at msi0 vec 0 (i915)
drm: Wrong MCH_SSKPD value: 0x16040307
drm: This can cause pipe underruns and display issues.
drm: Please upgrade your BIOS to fix this.
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff80008e0e8000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
Intel 7 Series MEI Controller (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: Intel 7 Series USB EHCI (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: Realtek Semic ALC662
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg1 at hdaudio0: Intel product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: Intel 7 Series PCIE (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
rtwn0 at pci1 dev 0 function 0: Realtek Semiconductor RTL8188CE Wireless LAN 802.11n PCI-E NIC (rev. 0x01)
rtwn0: interrupting at msi2 vec 0
rtwn0: MAC/BB RTL8188CE, RF 6052 1T1R, address [_MAC_XXXXXXXXXX]
rtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
rtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb1 at pci0 dev 28 function 1: Intel 7 Series PCIE (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re0: interrupting at msi3 vec 0
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 2: Intel 7 Series PCIE (rev. 0xc4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci3 dev 0 function 0: ASMedia ASM1042A USB 3.0 Host Controller (rev. 0x00)
xhci0: interrupting at ioapic0 pin 18
xhci0: xHCI version 1.0
usb1 at xhci0: USB revision 3.0
ppb3 at pci0 dev 28 function 3: Intel 7 Series PCIE (rev. 0xc4)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
re1 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x0c)
re1: interrupting at msi4 vec 0
re1: Ethernet address [_MAC_XXXXXXXXXX]
re1: using 256 tx descriptors
rgephy1 at re1 phy 7: RTL8251 1000BASE-T media interface, rev. 0
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: Intel 7 Series USB EHCI (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb2 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel NM70 LPC (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata0 at pci0 dev 31 function 2: Intel 7 Series (mobile) SATA Controller (AHCI) (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xc730ff43<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: Intel 7 Series SMBus Controller (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com1: console
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 104 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 17000 mW, 1100 MHz
acpicpu0: P1: FFH, lat 10 us, pow 15126 mW, 1000 MHz
acpicpu0: P2: FFH, lat 10 us, pow 13457 mW, 900 MHz
acpicpu0: P3: FFH, lat 10 us, pow 11824 mW, 800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
DRM error in ilk_display_irq_handler: Pipe A FIFO underrun
DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1097560560 Hz quality 3000
uhub0 at usb1: NetBSD xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
uhub1 at usb0: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wd0 at atabus0 drive 0
wd0: <INTEL SSDSA2BZ100G3>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub3 at uhub1 port 1: Intel Rate Matching Hub, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 4 ports with 4 removable, self powered
uhub4 at uhub2 port 1: Intel Rate Matching Hub, class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
umass0 at uhub4 port 2 configuration 1 interface 0
umass0: Generic USB Storage, rev 2.00/94.54, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 9454> disk removable
sd0: drive offline
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.21/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)