Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2015-09-26 18:24:17
From: ajcc
Description: NetBSD/sparc64 7.0 on Blade 100
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0 (GENERIC.201509250726Z)
total memory = 1280 MB
avail memory = 1238 MB
kern.module.path=/stand/sparc64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,Sun-Blade-100 (Sun Blade 100): [_HOSTID_XXXXX]
cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 502 MHz, CPU id 0
cpu0: manuf 17, impl 13, mask 14
cpu0: system tick frequency 5.555 MHz
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0
psycho0: pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0
pci0 at psycho0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 12 function 0
ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
flashprom at ebus0 addr 0-fffff not configured
clock0 at ebus0 addr 0-1fff: mk48t59
ebus_attach: idprom: incomplete
ebus1 at pci0 dev 7 function 0
ebus1: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
dma at ebus1 addr 0-ffff ipl 2a not configured
power at ebus1 addr 800-82f ipl 20 not configured
com0 at ebus1 addr 3f8-3ff ipl 2b: ns16550a, working fifo
com1 at ebus1 addr 2e8-2ef ipl 2b: ns16550a, working fifo
alipm0 at pci0 dev 3 function 0: 223KHz clock
iic0 at alipm0: I2C bus
admtemp0 at iic0 addr 0x18: ADM1021 or compatible environmental sensor
card-reader at iic0 addr 0x20 not configured
spdmem0 at iic0 addr 0x50
spdmem0: SDRAM, data ECC, 512MB, 133MHz (PC-133)
spdmem0: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.5ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-45
spdmem0: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: SDRAM, data ECC, 512MB, 133MHz (PC-133)
spdmem1: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.5ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-45
spdmem1: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
spdmem2 at iic0 addr 0x52
spdmem2: SDRAM, data ECC, 128MB, 133MHz (PC-133)
spdmem2: 12 rows, 10 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
spdmem2: tAA-tRCD-tRP-tRAS: 3-20-20-44
spdmem2: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
spdmem3 at iic0 addr 0x53
spdmem3: SDRAM, data ECC, 128MB, 133MHz (PC-133)
spdmem3: 12 rows, 10 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
spdmem3: tAA-tRCD-tRP-tRAS: 3-20-20-45
spdmem3: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing)
gem0 at pci0 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
gem0: interrupting at ivec 3006
ukphy0 at gem0 phy 1: OUI 0x0008bb, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gem0: Ethernet address [_MAC_XXXXXXXXXX], 2KB RX fifo, 2KB TX fifo
fwohci0 at pci0 dev 12 function 2: Sun Microsystems FireWire Controller (rev. 0x01)
fwohci0: interrupting at ivec 1c
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:2b:e8
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ohci0 at pci0 dev 12 function 3: Sun Microsystems USB Controller (rev. 0x01)
ohci0: interrupting at ivec 24
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x01)
autri0: interrupting at ivec 23
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 180c for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppb0 at pci0 dev 5 function 0: Intel S21152BB PCI-PCI Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
machfb0 at pci0 dev 19 function 0: ATI Technologies Rage XL (rev. 0x27)
machfb0: using MMIO aperture
machfb0: 16 MB aperture at 0x03000000, 4 KB registers at 0x00426000
machfb0: 128 KB ROM at 0x00440000
machfb0: ref_freq=29.498MHz
machfb0: 8192 KB SDRAM 114.992 MHz, maximum RAMDAC clock 230 MHz
machfb0: initial resolution 1280x1024 at 8 bpp
wsdisplay0 at machfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
direct rendering for machfb0 unsupported
pcons at mainbus0 not configured
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 502000000 Hz quality 100
timecounter: Timecounter "stick-counter" frequency 5555555 Hz quality 200
No counter-timer -- using STICK at 5.555MHz as system clock.
uhub0 at usb0: Sun Microsystems OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <LTN486S, , Y3S2> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0 at atabus0 drive 0
wd0: <ST320011A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub1 at uhub0 port 2: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/3.95, addr 2
uhub1: 3 ports with 2 removable, bus powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech Apple Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1
ums0 at uhidev0: 1 button
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 3 configuration 1 interface 0
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/3.95, addr 4, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub1 port 3 configuration 1 interface 1
uhidev2: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/3.95, addr 4, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
Kernelized RAIDframe activated
root on wd0a dumps on wd0b
root file system type: ffs
aceride0:0:1: lost interrupt
	type: atapi tc_bcount: 32 tc_skip: 0
aceride0:0:1: bus-master DMA error: missing interrupt, status=0x61
aceride0:0:1: device timeout, c_bcount=32, c_skip=0
cd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 1 (using DMA)
cd0(aceride0:0:1): generic HBA error
wdc_atapi_intr: bad data phase DATAIN
wdc_atapi_intr: bad data phase DATAIN
wdc_atapi_intr: bad data phase DATAIN
wdc_atapi_intr: bad data phase DATAIN
wdc_atapi_intr: bad data phase DATAIN