Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2015-10-08 10:42:01
From: tnn
Description: my left screen (Sun Blade 1500)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.21 (GENERIC.sb1500) #0: Thu Sep 10 06:49:52 CEST 2015
	[_EMAIL_XXXXXXXXXXXXXX]:/work/obj/sys/arch/sparc64/compile/GENERIC.sb1500
total memory = 8192 MB
avail memory = 8025 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,Sun-Blade-1500 (Sun Blade 1500): [_HOSTID_XXXXX]
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1062 MHz, CPU id 0
cpu0: manuf 3e, impl 16, mask 24
cpu0: system tick frequency 12 MHz
cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
memory-controller at mainbus0 not configured
schizo0 at mainbus0: addr 4000f600000: "Tomatillo", version 0, ign 780, bus A 0 to 1
schizo0:  pci0 at schizo0
pci0: i/o space, memory space enabled
ebus0 at pci0 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
flashprom at ebus0 addr 0-fffff not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5823
pcfiic0 at ebus0 addr 320-321 ipl 2e
iic0 at pcfiic0: I2C bus
dbcool0 at iic0 addr 0x2e
dbcool0: ADM1031 dBCool(tm) Controller (rev 0x0083)
seeprom0 at iic0 addr 0x54: motherboard-fru-prom: size 8192
spdmem0 at iic0 addr 0x50
spdmem0: DDR SDRAM (registered), data ECC, 2GB, 286MHz (PC-2300)
spdmem0: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x51
spdmem1: DDR SDRAM (registered), data ECC, 2GB, 286MHz (PC-2300)
spdmem1: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem2 at iic0 addr 0x52
spdmem2: DDR SDRAM (registered), data ECC, 2GB, 286MHz (PC-2300)
spdmem2: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem2: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem2: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem3 at iic0 addr 0x53
spdmem3: DDR SDRAM (registered), data ECC, 2GB, 286MHz (PC-2300)
spdmem3: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem3: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem3: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
clock-generator at iic0 addr 0x69 not configured
power at ebus0 addr 800-82f ipl 20 not configured
com0 at ebus0 addr 3f8-3ff ipl 2c: ns16550a, working fifo
com1 at ebus0 addr 2e8-2ef ipl 2c: ns16550a, working fifo
dma at ebus0 addr 0-ffff not configured
alipm0 at pci0 dev 6 function 0: 223KHz clock
iic1 at alipm0: I2C bus
card-reader at iic1 addr 0x20 not configured
autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x02)
autri0: interrupting at ivec 7a4
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at ivec 7a7
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 11 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ivec 7a6
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 1f98 for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
satalink0 at pci0 dev 2 function 0: Silicon Image SATALink 3112 (rev. 0x02)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using ivec 790 for native-PCI interrupt
atabus2 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus3 at satalink0 channel 1
satalink1 at pci0 dev 3 function 0: Silicon Image SATALink 3114 (rev. 0x02)
satalink1: 33MHz PCI bus
satalink1: bus-master DMA support present
satalink1: using ivec 78c for native-PCI interrupt
atabus4 at satalink1 channel 0
atabus5 at satalink1 channel 1
atabus6 at satalink1 channel 2
atabus7 at satalink1 channel 3
ppb0 at pci0 dev 4 function 0: Texas Instruments product ac23 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ohci2 at pci1 dev 8 function 0: NEC USB Host Controller (rev. 0x43)
ohci2: interrupting at ivec 788
ohci2: OHCI version 1.0
usb2 at ohci2: USB revision 1.0
ohci3 at pci1 dev 8 function 1: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at ivec 789
ohci3: OHCI version 1.0
usb3 at ohci3: USB revision 1.0
ehci0 at pci1 dev 8 function 2: NEC USB2 Host Controller (rev. 0x04)
ehci0: interrupting at ivec 78a
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci2 ohci3
usb4 at ehci0: USB revision 2.0
fwohci0 at pci1 dev 11 function 0: Texas Instruments TSB43AA23 IEEE 1394 Host Controller (rev. 0x00)
fwohci0: interrupting at ivec 78b
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:7c:0e
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ppm at mainbus0 not configured
schizo1 at mainbus0: addr 4000ff00000: "Tomatillo", version 0, ign 7c0, bus B 0 to 0
schizo1:  pci2 at schizo1
pci2: i/o space, memory space enabled
bge0 at pci2 dev 2 function 0: Broadcom BCM5703 Gigabit Ethernet
bge0: interrupting at ivec 37dc
bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000
bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address [_MAC_XXXXXXXXXX]
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
radeonfb0 at pci2 dev 3 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
radeonfb0: Video BIOS not present
radeonfb0: No video BIOS, using default clocks
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
radeonfb0: 64 MB aperture at 0x08000000, 64 KB registers at 0x00100000
radeonfb0: display 0: initial virtual resolution 1920x1080 at 8 bpp
radeonfb0: using 32 MB per display
radeonfb0: port 0: physical 1024x768 60Hz
radeonfb0: port 1: physical 1920x1080 60Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (fb, vt100 emulation)
drm at radeonfb0 not configured
i2c at mainbus0 not configured
pcons at mainbus0 not configured
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 1062000000 Hz quality 100
timecounter: Timecounter "stick-counter" frequency 12000000 Hz quality 200
No counter-timer -- using %stick at 12MHz as system clock.
satalink0: port 1: device present, speed: 1.5Gb/s
satalink1: port 0: device present, speed: 1.5Gb/s
satalink1: port 1: device present, speed: 1.5Gb/s
uhub0 at usb0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3 at usb3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 5 ports with 5 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Dell Dell USB Wired Entry Keyboard, rev 1.10/1.78, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Dell Dell USB Wired Entry Keyboard, rev 1.10/1.78, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
wd0 at atabus0 drive 0
wd0: <SanDisk SDCFH-64>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 62720 KB, 490 cyl, 8 head, 32 sec, 512 bytes/sect x 125440 sectors
wd0: drive supports PIO mode 4
wd0(aceride0:0:0): using PIO mode 4
wd1 at atabus3 drive 0
wd1: <INTEL SSDSC2CW120A3>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus4 drive 0
wd2: <SAMSUNG HD203WI>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(satalink1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd3 at atabus5 drive 0
wd3: <SAMSUNG HD203WI>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd3(satalink1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
raid0: RAID Level 1
raid0: Components: /dev/wd2a /dev/wd3a
raid0: Total Sectors: 3907029056 (1907729 MB)
cgdroot_finalize()
cgdroot_finalize: finished
root on cgd0a dumps on cgd0b
/: replaying log to memory
root file system type: ffs
kern.module.path=/stand/sparc64/7.99.21/modules
/: replaying log to disk
wsdisplay0: screen 4 added (fb, vt100 emulation)
/work: replaying log to disk
/bootfs: replaying log to disk
/d: replaying log to disk