Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-10-09 15:16:57
From: tnn
Description: AlphaServer DS20
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.21 (GENERIC-$Revision: 1.366 $) #0: Fri Oct 9 11:32:54 UTC 2015
tnn@ds20:/usr/src/sys/arch/alpha/compile/GENERIC.ds20
AlphaServer DS20 500 MHz, s/n xxxxxxxxxx
8192 byte page size, 2 processors.
total memory = 4096 MB
(2864 KB reserved for PROM, 4093 MB used by NetBSD)
avail memory = 4024 MB
timecounter: Timecounters tick every 0.976 msec
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264-4
cpu0: Architecture extensions: 0x303<PAT,MVI,FIX,BWX>
cpu1 at mainbus0: ID 1, 21264-4
cpu1: Architecture extensions: 0x303<PAT,MVI,FIX,BWX>
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 8 Dchips, 2 memory buses of 32 bytes
tsc0: arrays present: 1024MB, 1024MB (split), 1024MB, 1024MB, Dchip 0 rev 1
tsp0 at tsc0
pci0 at tsp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
sio0 at pci0 dev 5 function 0: vendor 1080 product c693 (rev. 0x00)
cypide0 at pci0 dev 5 function 1: Cypress 82C693 IDE Controller (rev. 0x00)
cypide0: bus-master DMA support present
cypide0: primary channel wired to compatibility mode
cypide0: primary channel interrupting at isa irq 14
atabus0 at cypide0 channel 0
cypide1 at pci0 dev 5 function 2: Cypress 82C693 IDE Controller (rev. 0x00)
cypide1: hardware does not support DMA
cypide1: primary channel wired to compatibility mode
cypide1: secondary channel interrupting at isa irq 15
atabus1 at cypide1 channel 0
ohci0 at pci0 dev 5 function 3: vendor 1080 product c693 (rev. 0x00)
ohci0: interrupting at isa irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
radeonfb0 at pci0 dev 7 function 0: vendor 1002 product 5960 (rev. 0x01)
radeonfb0: Found 52 KB Legacy BIOS
radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 200000, maxpll = 400000
radeonfb0: 64 MB aperture at 0x40000000, 64 KB registers at 0x01110000
radeonfb0: display 0: initial virtual resolution 1680x1050 at 32 bpp
radeonfb0: using 32 MB per display
radeonfb0: port 0: physical 1024x768 60Hz
radeonfb0: port 1: physical 1680x1050 60Hz
wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at radeonfb0 not configured
vendor 1002 product 5940 (miscellaneous display, revision 0x01) at pci0 dev 7 function 1 not configured
wm0 at pci0 dev 8 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02)
wm0: interrupting at dec 6600 irq 27
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
satalink0 at pci0 dev 9 function 0: Silicon Image SATALink 3114 (rev. 0x02)
satalink0: 33MHz PCI bus
satalink0: bus-master DMA support present
satalink0: using dec 6600 irq 23 for native-PCI interrupt
atabus2 at satalink0 channel 0
atabus3 at satalink0 channel 1
atabus4 at satalink0 channel 2
atabus5 at satalink0 channel 3
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
attimer0: attached to pcppi0
tsp1 at tsc0
pci1 at tsp1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci1 dev 7 function 0: vendor 1011 product 0024 (rev. 0x03)
pci2 at ppb0 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
esiop0 at pci2 dev 0 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at dec 6600 irq 47
scsibus0 at esiop0: 16 targets, 8 luns per target
esiop1 at pci2 dev 1 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop1: using on-board RAM
esiop1: interrupting at dec 6600 irq 46
scsibus1 at esiop1: 16 targets, 8 luns per target
tlp0 at pci2 dev 2 function 0: DECchip 21140A Ethernet, pass 2.2
tlp0: interrupting at dec 6600 irq 45
tlp0: Ethernet address [_MAC_XXXXXXXXXX]
nsphy0 at tlp0 phy 5: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tsciic0 at tsc0
iic0 at tsciic0: I2C bus
timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0
timecounter: Timecounter "PCC" frequency 499876080 Hz quality 1000
stray isa irq 14
satalink0: port 2: device present, speed: 1.5Gb/s
stray isa irq 14
satalink0: port 3: device present, speed: 1.5Gb/s
scsibus0: waiting 2 seconds for devices to settle...
stray isa irq 14
scsibus1: waiting 2 seconds for devices to settle...
stray isa irq 14
stray isa irq 14; stopped logging
uhub0 at usb0: vendor 1080 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
cd0 at scsibus0 target 5 lun 0: <DEC, RRD47 (C) DEC, 1206> cdrom removable
cd0: sync (100.00ns offset 16), 8-bit (10.000MB/s) transfers
wd0 at atabus0 drive 0
wd0: <ST340016A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(cypide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wd1 at atabus4 drive 0
wd1: <ST31000340NS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus5 drive 0
wd2: <ST31000340NS>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(satalink0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
stray isa irq 14
stray isa irq 14
stray isa irq 14
raid0: RAID Level 1
raid0: Components: /dev/wd2a /dev/wd1a
raid0: Total Sectors: 1953525056 (953869 MB)
root on raid0a dumps on raid0b
root file system type: ffs