Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2015-10-11 10:06:15
From: tnn
Description: SGI O2 180MHz 256MB
pmap_steal_memory: seg 0: 0x2 0x2 0xf 0xf pmap_steal_memory: seg 0: too small for 54 pages pmap_steal_memory: seg 1: 0xf 0xf 0x68 0x68 pmap_steal_memory: seg 0: 0x2 0x2 0xf 0xf pmap_steal_memory: seg 0: 0x4 0x4 0xf 0xf pmap_steal_memory: seg 0: too small for 1189 pages pmap_steal_memory: seg 1: 0x45 0x45 0x68 0x68 pmap_steal_memory: seg 1: too small for 1189 pages pmap_steal_memory: seg 2: 0x73b 0x73b 0xd50 0xd50 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.21 (GENERIC32_IP3x) #0: Sun Oct 11 09:17:28 CEST 2015 [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/work/sgimips/obj/sys/arch/sgimips/compile/GENERIC32_IP3x total memory = 256 MB (6848 KB reserved for ARCS) avail memory = 237 MB timecounter: Timecounters tick every 10.000 msec mainbus0 (root): SGI-IP32 [SGI, c], 1 processor cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0 cpu0: 48 TLB entries, 16MB max page size cpu0: 32KB/32B 2-way set-associative L1 instruction cache cpu0: 32KB/32B 2-way set-associative write-back L1 data cache cpu0: 512KB/32B direct-mapped write-through L2 unified cache crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: 161) crmfb0 at mainbus0 addr 0x16000000: SGI CRIME Graphics Display Engine crmfb0: initial resolution 1280x1024 Vendor: [DEL] Dell Product: [A09C] DELL P2414H Serial number: 36WJX37305YL Manufactured 2013 Week 27 EDID Version 1.3 EDID Comment: Video Input: e Analog -0.7, 0.3V Seperate syncs Composite sync Sync on green Gamma: 2.20 Max Size: 53 cm x 30 cm Features: ea DPMS standby DPMS suspend DPMS active-off RGB Preferred timing Chroma Info: Red X: 0.650 Red Y: 0.650 Grn X: 0.320 Grn Y: 0.613 Blu X: 0.154 Blu Y: 0.060 Wht X: 0.313 Wht Y: 0.329 Range: Horizontal: 30 - 83 kHz Vertical: 56 - 76 Hz Max Dot Clock: 170 MHz Video modes: 720x400 @ 70Hz (28320 738 846 900 412 414 449 -H +V) 640x480 @ 60Hz (25175 656 752 800 490 492 525 -H -V) 640x480 @ 75Hz (31500 656 720 840 481 484 500 -H -V) 800x600 @ 60Hz (40000 840 968 1056 601 605 628 +H +V) 800x600 @ 75Hz (49500 816 896 1056 601 604 625 +H +V) 1024x768 @ 60Hz (65000 1048 1184 1344 771 777 806 -H -V) 1024x768 @ 75Hz (78750 1040 1136 1312 769 772 800 +H +V) 1280x1024 @ 75Hz (135000 1296 1440 1688 1025 1028 1066 +H +V) 1152x864 @ 75Hz (108000 1216 1344 1600 865 868 900 +H +V) 1280x1024 @ 60Hz (108000 1328 1440 1688 1025 1028 1066 +H +V) 1600x900 @ 60Hz (118996 1696 1864 2128 901 904 932 +H +V) 1920x1080 @ 60Hz (148500 2008 2052 2200 1084 1089 1125 +H +V) Preferred mode: 1920x1080 @ 60Hz Number of extension blocks: 0 crmfb0: using 1920x1080 crmfb0: allocated 8847360 byte fb @ 0x80060000 (0xa1400000) wsdisplay0 at crmfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 mace0 at mainbus0 addr 0x1f000000 lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000 com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns8250 or ns16450, no fifo com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns8250 or ns16450, no fifo macekbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0: PS2 controller pckbd0 at macekbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 mcclock0 at mace0 offset 0x3a0000 intrmask 0x0 mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1 mec0: Ethernet address [_MAC_XXXXXXXXXX] nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto mavb0 at mace0 offset 0x300000 intr 6 intrmask 0x0: AD1843 rev 1 audio0 at mavb0: full duplex, playback, capture, independent macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1 pci0 at macepci0 bus 0 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter ahc0: interrupting at crime interrupt 8 ahc0: Using left over BIOS settings ahc0: Host Adapter has no SEEPROM. Using default SCSI target parameters ahc0: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs scsibus0 at ahc0: 16 targets, 8 luns per target ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter ahc1: interrupting at crime interrupt 9 ahc1: Using left over BIOS settings ahc1: Host Adapter has no SEEPROM. Using default SCSI target parameters ahc1: aic7880: Ultra Wide Channel A, SCSI Id=0, 16/253 SCBs scsibus1 at ahc1: 16 targets, 8 luns per target uhci0 at pci0 dev 3 function 0: vendor 1106 product 3038 (rev. 0x61) uhci0: interrupting at crime interrupt 10 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 3 function 1: vendor 1106 product 3038 (rev. 0x61) uhci1: interrupting at crime interrupt 13 usb1 at uhci1: USB revision 1.0 ehci0 at pci0 dev 3 function 2: vendor 1106 product 3104 (rev. 0x63) ehci0: interrupting at crime interrupt 14 ehci0: dropped intr workaround enabled ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 usb2 at ehci0: USB revision 2.0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mips3_cp0_counter" frequency 90007220 Hz quality 100 scsibus0: waiting 2 seconds for devices to settle... scsibus1: waiting 2 seconds for devices to settle... uhub0 at usb0: vendor 1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered sd0 at scsibus0 target 1 lun 0: <IBM-ESXS, ST318452LC !#, B843> disk fixed sd0: 17357 MB, 18496 cyl, 4 head, 480 sec, 512 bytes/sect x 35548320 sectors sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5401TA, 3605> cdrom removable cd0: sync (236.00ns offset 15), 8-bit (4.237MB/s) transfers boot device: sd0 root on sd0a dumps on sd0b root file system type: ffs kern.module.path=/stand/sgimips/7.99.21/modules pid 1(init): ABI set to O32 (e_flags=0x1007) wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation)