Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2015-10-31 01:01:40
From: tsutsui
Description: NetBSD/vax 6.1.5 on simh emulating VAX 11/780
% simh-vax780 netbsd-boot780

VAX780 simulator V3.9-0
libpcap version 1.3.0
Eth: opened OS device re0
sim> boot rq0
Loading boot code from vmb.exe

>> NetBSD/vax boot [1.11] <<
>> Press any key to abort autoboot 0
nfs_open: must mount first.
open netbsd.vax: Device not configured
> boot netbsd
2591168+174136 [211456+201165]=0x3081e8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.5 (GENERIC)
VAX 11/780
total memory = 65532 KB
avail memory = 59784 KB
mainbus0 (root)
cpu0 at mainbus0KA80, [_SERIAL_NUMBER_X](0), hardware ECO level 7(112)
cpu0: 4KB L1 cachen, no FPA
sbi0 at mainbus0
mem0 at sbi0 tr1: (eu)
mem1 at sbi0 tr2: (eu)
uba1 at sbi0 tr3: DW780
dz1 at uba1 csr 160100 vec 304 ipl 15
mtc0 at uba1 csr 174500 vec 774 ipl 15
mscpbus0 at mtc0: version 5 model 5
mscpbus0: DMA burst size set to 4
uda0 at uba1 csr 172150 vec 770 ipl 15
mscpbus1 at uda0: version 3 model 6
mscpbus1: DMA burst size set to 4
de0 at uba1 csr 174510 vec 120 ipl 15: delua, hardware address [_MAC_XXXXXXXXXX]
rlc0 at uba1 csr 174400 vec 160 ipl 15
rl0 at rlc0 drive 0: RL01, drive not loaded
rl1 at rlc0 drive 1: RL01, drive not loaded
rl2 at rlc0 drive 2: RL01, drive not loaded
rl3 at rlc0 drive 3: RL01, drive not loaded
ts0 at uba1 csr 172520 vec 224 ipl 15: TS11
ts0: rev 0, extended features enabled, transport offline
mba0 at sbi0 tr8
hp0 at mba0 drive 0: I/O error: , size = 536870911 sectors
hp1 at mba0 drive 1: I/O error: , size = 536870911 sectors
hp2 at mba0 drive 2: I/O error: , size = 536870911 sectors
hp3 at mba0 drive 3: I/O error: , size = 536870911 sectors
hp4 at mba0 drive 4: I/O error: , size = 536870911 sectors
hp5 at mba0 drive 5: I/O error: , size = 536870911 sectors
hp6 at mba0 drive 6: I/O error: , size = 536870911 sectors
hp7 at mba0 drive 7: I/O error: , size = 536870911 sectors
mba1 at sbi0 tr9
device type 140051 at mba1 drive 0 unsupported
mt0 at mscpbus0 drive 0: TU81
mt1 at mscpbus0 drive 1: TU81
mt2 at mscpbus0 drive 2: TU81
mt3 at mscpbus0 drive 3: TU81
ra0 at mscpbus1 drive 0: RA92
racd0 at mscpbus1 drive 1: RRD40
ra1 at mscpbus1 drive 2: RD54
rx0 at mscpbus1 drive 3: RX50
hp0: drive error: er1 4000 er2 0
hp0: Attention! er1 4000 er2 0
hp1: drive error: er1 4000 er2 0
hp1: Attention! er1 4000 er2 0
hp2: drive error: er1 4000 er2 0
hp2: Attention! er1 4000 er2 0
hp3: drive error: er1 4000 er2 0
hp3: Attention! er1 4000 er2 0
hp4: drive error: er1 4000 er2 0
hp4: Attention! er1 4000 er2 0
hp5: drive error: er1 4000 er2 0
hp5: Attention! er1 4000 er2 0
hp6: drive error: er1 4000 er2 0
hp6: Attention! er1 4000 er2 0
hp7: drive error: er1 4000 er2 0
hp7: Attention! er1 4000 er2 0
ra0: size 2940951 sectors
racd0: size 1331200 sectors
ra1: attempt to bring on line failed:  unit offline (not mounted) (code 3, subcode 1)
rx0: attempt to bring on line failed:  unit offline (not mounted) (code 3, subcode 1)
boot device: ra0
root on ra0a dumps on ra0b
root file system type: ffs
Sat Oct 31 09:41:07 UTC 2015
Starting root file system check:
/dev/rra0a: file system is clean; not checking
swapctl: setting dump device to /dev/ra0b
swapctl: adding /dev/ra0b as swap device at priority 0
Starting file system checks:
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
/etc/rc: WARNING: $hostname not set.
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Building databases: dev, utmp, utmpx, services.
Starting syslogd.
Mounting all filesystems...
Clearing temporary files.
Updating fontconfig cache: done.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/ra0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
postfix: rebuilding /etc/mail/aliases (missing /etc/mail/aliases.db)
newaliases: warning: valid_hostname: empty hostname
newaliases: fatal: unable to use my own hostname
Oct 31 09:49:57  postfix/sendmail[301]: fatal: unable to use my own hostname
/etc/rc.d/postfix exited with code 1
Starting inetd.
Starting cron.
The following components reported failures:
    /etc/rc.d/postfix
See /var/run/rc.log for more information.
Sat Oct 31 09:49:58 UTC 2015

NetBSD/vax (Amnesiac) (console)

login: root
Oct 31 09:50:08  login: ROOT LOGIN (root) on tty console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.5 (GENERIC)

Welcome to NetBSD!

Terminal type? [unknown] vt100
Terminal type is vt100.                                                 
We recommend that you create a non-root account and use su(1) for root access.
#