Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-11-16 23:48:23
From: ginger
Description: NetBSD-current-amd64 WORKS Well
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.21 (NOFPROF) #8: Sun Nov 15 10:08:35 UTC 2015
tyler@:/usr/src/sys/arch/amd64/compile/NOFPROF
total memory = 2047 MB
avail memory = 1978 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0x00000000000FB2D0 000024 (v02 ACPIAM)
ACPI: XSDT 0x000000007FFB0100 000044 (v01 A M I OEMXSDT 06000516 MSFT 00000097)
ACPI: FACP 0x000000007FFB0290 0000F4 (v03 A M I OEMFACP 06000516 MSFT 00000097)
ACPI: DSDT 0x000000007FFB0400 006798 (v01 A0155 A0155001 00000001 INTL 02002026)
ACPI: FACS 0x000000007FFBE000 000040
ACPI: FACS 0x000000007FFBE000 000040
ACPI: APIC 0x000000007FFB0390 000070 (v01 A M I OEMAPIC 06000516 MSFT 00000097)
ACPI: OEMB 0x000000007FFBE040 000046 (v01 A M I AMI_OEM 06000516 MSFT 00000097)
ACPI: MCFG 0x000000007FFB6BA0 00003C (v01 A M I OEMMCFG 06000516 MSFT 00000097)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Pentium(R) 4 CPU 3.06GHz, id 0xf49
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Pentium(R) 4 CPU 3.06GHz, id 0xf49
acpi0 at mainbus0: Intel ACPICA 20150717
acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,06000516>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
sysbeep0 at pcppi1
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
P3F6 (PNP0C02) at acpi0 not configured
FWH (INT0800) at acpi0 not configured
FWHE (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150717/hwxface-646)
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2580 (rev. 0x04)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 2581 (rev. 0x04)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 4
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
genfb0 at pci1 dev 0 function 0: vendor 10de product 0140 (rev. 0xa2)
genfb0: framebuffer at 0xd8000000, size 1400x1050, depth 16, stride 2800
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: vendor 10ec product 0880
hdafg0: DIG00 2ch: SPDIF Out [Jack]
hdafg0: DAC01 6ch: Speaker [Jack]
hdafg0: ADC02 2ch: Line In [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: DAC04 2ch: HP Out [Jack]
hdafg0: ADC05 2ch: Mic In [Jack]
hdafg0: 6ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb1 at pci0 dev 28 function 0: vendor 8086 product 2660 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 8086 product 2662 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 2
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0, Yukon-2 EC rev. A3 (0x2): ioapic0 pin 17
msk0 at mskc0 port A: Ethernet address ::ce:ns:or:ed::
OUI 0x000ac2 model 0x000c rev 2 at msk0 phy 0 not configured
msk0: no PHY found!
uhci0 at pci0 dev 29 function 0: vendor 8086 product 2658 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 2659 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 265a (rev. 0x03)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 8086 product 265b (rev. 0x03)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 265c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xd3)
pci4 at ppb3 bus 1
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2640 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 1: Intel 82801FB IDE Controller (ICH6) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
piixide1 at pci0 dev 31 function 2: Intel 82801FR Serial ATA/Raid Controller (rev. 0x03)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus3 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 266a (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <_NEC DVD_RW ND-3550A, , 1.05> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb4: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
uhub3 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb3: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: Samsung U5, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Samsung, U5, 0100> disk removable
sd0: 1819 MB, 923 cyl, 16 head, 63 sec, 2048 bytes/sect x 931328 sectors
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: A4Tech USB Mouse, rev 1.10/10.32, addr 2, iclass 3/1
uhidev0: 4 report ids
ums0 at uhidev0 reportid 1: 8 buttons and Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev0 reportid 4: input=5, output=0, feature=0
wd0 at atabus3 drive 0
wd0: <ST380817AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
uhidev1 at uhub3 port 2 configuration 1 interface 0
uhidev1: SIGMACHIP USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1
ukbd0 at uhidev1
root file system type: ffs
kern.module.path=/stand/amd64/7.99.21/modules
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub3 port 2 configuration 1 interface 1
uhidev2: SIGMACHIP USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/0
uhidev2: 2 report ids
uhid1 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
u3ginit0 at uhub2 port 3: Switching to 3G mode
u3ginit0: detached
u3ginit0: at uhub2 port 3 (addr 2) disconnected
u3g0 at uhub2 port 3 configuration 1 interface 0
ucom0 at u3g0 portno 0: 3G Modem
u3g1 at uhub2 port 3 configuration 1 interface 1
ucom1 at u3g1 portno 0: 3G Modem
u3g2 at uhub2 port 3 configuration 1 interface 2
ucom2 at u3g2 portno 0: 3G Modem
u3g3 at uhub2 port 3 configuration 1 interface 3
ucom3 at u3g3 portno 0: 3G Modem