Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2015-11-30 21:09:44
From: ajcc
Description: OpenBSD/i386 5.8-current on Thinkpad T23
OpenBSD 5.8-current (GENERIC) #1389: Mon Nov 30 09:08:59 MST 2015
cpu0: Intel(R) Pentium(R) III Mobile CPU 1133MHz ("GenuineIntel" 686-class) 1.14 GHz
real mem  = 669990912 (638MB)
avail mem = 644653056 (614MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/18/06, BIOS32 rev. 0 @ 0xfd7e0, SMBIOS rev. 2.31 @ 0xe0010 (49 entries)
bios0: vendor IBM version "1AET64WW (1.20 )" date 10/18/2006
bios0: IBM 26474MG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S4) PCI1(S4) DOCK(S4) USB0(S3) USB1(S3) USB2(S3) AC97(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0: !C3(@120 io@0x101d), !C2(@84 io@0x101c), C1(@1 halt!), FVS, 1133, 733 MHz
acpipwrres0 at acpi0: PUBS, resource for USB0, USB1
acpitz0 at acpi0: critical temperature is 96 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: DOCK not docked (0)
bios0: ROM list: 0xc0000/0xe000 0xce000/0x1000 0xcf000/0x1000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830M Host" rev 0x02
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd0000000, size 0xe400000
ppb0 at pci0 dev 1 function 0 "Intel 82830M AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 SuperSavage IX/C SDR" rev 0x05
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x01: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x01: irq 11
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0x50000000/0x1000
2:0:1: mem address conflict 0x51000000/0x1000
cbb0 at pci2 dev 0 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 0 function 1 "TI PCI1420 CardBus" rev 0x00: irq 5
"AT&T/Lucent LTMODEM" rev 0x01 at pci2 dev 2 function 0 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x41, i82562: irq 11, address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST980815A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8081N, 0010> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x01: irq 5
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01: irq 5, ICH3 AC97
ac97: codec id 0x43525936 (Cirrus Logic CS4299 rev 6)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
dc0 at cardbus1 dev 0 function 0 "Xircom X3201-3" rev 0x03: irq 5, address [_MAC_XXXXXXXXXX]
tqphy0 at dc0 phy 0: 78Q2120 10/100 PHY, rev. 10
com4 at cardbus1 dev 0 function 1 "Xircom 56k Modem" rev 0x03: irq 5: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (efa6ca999d631cf9.a) swap on wd0b dump on wd0b