Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-12-04 03:40:23
From: msaitoh
Description: HP EliteDesk 800 G2 SFF (ENERGY STAR 6.0)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.23 (GENERIC) #37: Fri Dec 4 03:03:09 JST 2015
msaitoh@curusb:/disk/sources/NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 7913 MB
avail memory = 7665 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP HP EliteDesk 800 G2 SFF ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000FBE20 000024 (v02 HPQOEM)
ACPI: XSDT 0x0000000087FFD0E8 0000BC (v01 HPQOEM SLIC-BPC 00000000 01000013)
ACPI: FACP 0x0000000087FF0000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: DSDT 0x0000000087FCF000 01D984 (v02 HPQOEM 8054 00000000 INTL 20121018)
ACPI: FACS 0x0000000087F5A000 000040
ACPI: SSDT 0x0000000087FFC000 000108 (v02 HP ShmTable 00000001 INTL 20121018)
ACPI: TCPA 0x0000000087FFB000 000032 (v02 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x0000000087FFA000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
ACPI: UEFI 0x0000000087F66000 000042 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x0000000087FF4000 0051FA (v02 SaSsdt SaSsdt 00003000 INTL 20121018)
ACPI: SSDT 0x0000000087FF3000 0005B1 (v01 Intel PerfTune 00001000 INTL 20121018)
ACPI: MSDM 0x0000000087FF2000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: SLIC 0x0000000087FF1000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001)
ACPI: HPET 0x0000000087FEF000 000038 (v01 HPQOEM 8054 00000001 HP 00000001)
ACPI: APIC 0x0000000087FEE000 0000BC (v01 HPQOEM 8054 00000001 HP 00000001)
ACPI: MCFG 0x0000000087FED000 00003C (v01 HPQOEM 8054 00000001 HP 00000001)
ACPI: SSDT 0x0000000087FCE000 00019A (v02 HPQOEM Sata0Ide 00001000 INTL 20121018)
ACPI: SSDT 0x0000000087FCD000 000729 (v01 HPQOEM PtidDevc 00001000 INTL 20121018)
ACPI: SSDT 0x0000000087FCC000 000E6E (v02 CpuRef CpuSsdt 00003000 INTL 20121018)
ACPI: DMAR 0x0000000087FCB000 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: ASF! 0x0000000087FCA000 0000A5 (v32 HPQOEM UYA 00000001 TFSM 000F4240)
ACPI: FPDT 0x0000000087FC9000 000044 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: BGRT 0x0000000087FC8000 000038 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz, id 0x506e3
acpi0 at mainbus0: Intel ACPICA 20150717
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,00000000>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8265710010 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE826570E810 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE826570E010 0005AA (v02 PmRef ApIst 00003000 INTL 20121018)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810E19D090 000119 (v02 PmRef ApCst 00003000 INTL 20121018)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)
acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
acpiec1 at acpi0 (EC0, PNP0C09-1)
: io 0x62,0x66
acpiwmi0 at acpi0 (WMIB, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMIV, PNP0C14-2): ACPI WMI Interface
wmihp0 at acpiwmi1: HP WMI mappings
ACPI Error: Attempt to CreateField of length zero (20150717/dsopcode-182)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WVPI] (Node 0xfffffe8265700c90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WMPV] (Node 0xfffffe8265700b90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Attempt to CreateField of length zero (20150717/dsopcode-182)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WVPI] (Node 0xfffffe8265700c90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WMPV] (Node 0xfffffe8265700b90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Attempt to CreateField of length zero (20150717/dsopcode-182)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WVPI] (Node 0xfffffe8265700c90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WMPV] (Node 0xfffffe8265700b90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Attempt to CreateField of length zero (20150717/dsopcode-182)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WVPI] (Node 0xfffffe8265700c90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WMPV] (Node 0xfffffe8265700b90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Attempt to CreateField of length zero (20150717/dsopcode-182)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WVPI] (Node 0xfffffe8265700c90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
ACPI Error: Method parse/execution failed [\_SB_.WMIV.WMPV] (Node 0xfffffe8265700b90), AE_AML_OPERAND_VALUE (20150717/psparse-558)
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD1F, 0x001f): ACPI Display Output Device
acpiout0: brightness levels: [0-100]
acpiout1 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout3 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout4 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout5 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout6 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout7 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout8 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpiout9 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout10 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout11 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout12 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout13 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout14 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout15 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: unknown output device acpiout15
acpivga0: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
LDR2 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
pckbc1 at acpi0 (PS2K, HPQ8001) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN3006) (aux port): irq 12
COM1 (PNP0501) at acpi0 not configured
NSHM (PNP0C02) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpiwmi2 at acpi0 (WMIS, PNP0C14-3): ACPI WMI Interface
acpiwmibus at acpiwmi2 not configured
EPC (INT0E0C) at acpi0 not configured
PEPD (INT33A1) at acpi0 not configured
TPM (IFX0102) at acpi0 not configured
PTMD (INT3394) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
ACPI: Enabled 3 GPEs in block 00 to 7F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150717/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150717/hwxface-646)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 191f (rev. 0x07)
vga0 at pci0 dev 2 function 0: vendor 8086 product 1912 (rev. 0x06)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product a12f (rev. 0x31)
xhci0: interrupting at ioapic0 pin 16
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 2.0
vendor 8086 product a131 (miscellaneous DASP, revision 0x31) at pci0 dev 20 function 2 not configured
vendor 8086 product a13a (miscellaneous communications, revision 0x31) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 100 Series KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0x3080, interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
ahcisata0 at pci0 dev 23 function 0: vendor 8086 product a102 (rev. 0x31)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 5 ports, 32 slots, CAP 0xef34ff44<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 5
ppb0 at pci0 dev 28 function 0: vendor 8086 product a115 (rev. 0xf1)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 8086 product a146 (rev. 0x31)
vendor 8086 product a121 (miscellaneous memory, revision 0x31) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: vendor 10ec product 0221
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg1 at hdaudio0: vendor 8086 product 2809
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a123 (rev. 0x31)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
wm0 at pci0 dev 31 function 6: I219 LM Ethernet Connection (rev. 0x31)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 4096 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 6
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x001b15d1 rev 0x10
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 151 us, pow 200 mW
acpicpu0: C3: FFH, lat 256 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 65000 mW, 3201 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 65000 mW, 3200 MHz
acpicpu0: P2: FFH, lat 10 us, pow 59079 mW, 3000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 56516 mW, 2900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 51532 mW, 2700 MHz
acpicpu0: P5: FFH, lat 10 us, pow 46744 mW, 2500 MHz
acpicpu0: P6: FFH, lat 10 us, pow 41545 mW, 2300 MHz
acpicpu0: P7: FFH, lat 10 us, pow 39313 mW, 2200 MHz
acpicpu0: P8: FFH, lat 10 us, pow 34990 mW, 2000 MHz
acpicpu0: P9: FFH, lat 10 us, pow 30835 mW, 1800 MHz
acpicpu0: P10: FFH, lat 10 us, pow 28823 mW, 1700 MHz
acpicpu0: P11: FFH, lat 10 us, pow 24402 mW, 1500 MHz
acpicpu0: P12: FFH, lat 10 us, pow 20687 mW, 1300 MHz
acpicpu0: P13: FFH, lat 10 us, pow 17137 mW, 1100 MHz
acpicpu0: P14: FFH, lat 10 us, pow 15427 mW, 1000 MHz
acpicpu0: P15: FFH, lat 10 us, pow 12119 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3192641610 Hz quality 3000
uhub0 at usb0: NetBSD xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub0: 16 ports with 16 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 5: PHY offline
ahcisata0 port 2: PHY offline
ahcisata0 port 1: PHY offline
ahcisata0 port 3: PHY offline
uhidev0 at uhub0 port 4 configuration 1 interface 0
wd0 at atabus0 drive 0
wd0: <SanDisk SD7SB3Q-256G-1006>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
wd0: GPT GUID: 12b4366c-70c0-475c-bab5-10aa0eb850be
dk0 at wd0: "EFI system partition", 737280 blocks at 2048, type: msdos
dk1 at wd0: "Microsoft reserved partition", 262144 blocks at 739328, type: <unknown>
dk2 at wd0: "Basic data partition", 456198144 blocks at 1001472, type: <unknown>
dk3 at wd0: "36c4004c-8a70-4d6b-a8c8-52f46b07f01c", 1699840 blocks at 478171136, type: <unknown>
wd0: wedge named '36c4004c-8a70-4d6b-a8c8-52f46b07f01c' already existed, using '36c4004c-8a70-4d6b-a8c8-52f46b07f01c'
dk4 at wd0: "7eeaf340-a5aa-4e12-96d2-63ca662f5535", 20246528 blocks at 479870976, type: <unknown>
wd0: wedge named '7eeaf340-a5aa-4e12-96d2-63ca662f5535' already existed, using '7eeaf340-a5aa-4e12-96d2-63ca662f5535'
uhidev0: Darfon USB Optical Mouse, rev 1.10/3.00, addr 1, iclass 3/1
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 8 configuration 1 interface 0
uhidev1: CYKB06 USB Keyboard, rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev2 at uhub0 port 8 configuration 1 interface 1
uhidev2: CYKB06 USB Keyboard, rev 1.10/1.01, addr 2, iclass 3/1
uhidev2: 2 report ids
uhid0 at uhidev2 reportid 1: input=6, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
umass0 at uhub0 port 10 configuration 1 interface 0
umass0: ADATA ADATA USB Flash Drive, rev 2.10/10.75, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <ADATA, USB Flash Drive, 1.00> disk removable
sd0: fabricating a geometry
sd0: 30146 MB, 30146 cyl, 64 head, 32 sec, 512 bytes/sect x 61739008 sectors
sd0: fabricating a geometry
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b