Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2016-01-02 12:16:26
From: me
Description: netbsd 7 stable sparc64 ultra 10
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0_STABLE (ULTRA10) #1: Fri Jan 1 14:55:48 CET 2016
axel@freya:/home/axel/NetBSD/obj/sys/arch/sparc64/compile/ULTRA10
total memory = 1024 MB
avail memory = 996 MB
kern.module.path=/stand/sparc64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): SUNW,Ultra-5_10 (Sun Ultra 5/10 UPA/PCI): [_HOSTID_XXXXX]
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440 MHz, CPU id 0
cpu0: manuf 17, impl 12, mask 91
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc4000
psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
pci0 at psycho0
pci0: i/o space, memory space enabled
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 25 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
sab0 at ebus0 addr 400000-40007f ipl 2b: rev 3.2
sabtty0 at sab0 port 0
sabtty1 at sab0 port 1: console i/o
com0 at ebus0 addr 3083f8-3083ff ipl 29: ns16550a, working fifo
kbd0 at com0
com1 at ebus0 addr 3062f8-3062ff ipl 2a: ns16550a, working fifo
ms0 at com1
wsmouse0 at ms0 mux 0
ecpp at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 22 not configured
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 27 not configured
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 23 ipl 24: CS4231A
audio0 at audiocs0: full duplex, playback, capture
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address [_MAC_XXXXXXXXXX]
nsphy0 at hme0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
machfb0 at pci1 dev 2 function 0: ATI Technologies 3D Rage Pro (rev. 0x5c)
machfb0: using MMIO aperture
machfb0: 16 MB aperture at 0xe1000000, 4 KB registers at 0xe2000000
machfb0: 128 KB ROM at 0xe1020000
machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz
machfb0: initializing the DSP
machfb0: initial resolution 1152x864 at 8 bpp
machfb0: initializing the DSP
wsdisplay1 at machfb0 kbdmux 1
wsmux1: connecting to wsdisplay1
wsdisplay1: screen 0-3 added (default)
direct rendering for machfb0 unsupported
cmdide0 at pci1 dev 3 function 0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1820 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci2 dev 1 function 0 not configured
hme1 at pci2 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme1: interrupting at ivec 3011
hme1: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at hme1 phy 1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcons at mainbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 440000000 Hz quality 100
No counter-timer -- using %tick at 440MHz as system clock.
wskbd0 at kbd0 mux 1
wd0 at atabus0 drive 0
wd0: <Hitachi HDT725032VLAT80>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1
wd1: <WDC WD3200JB-00KFA0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wd1(cmdide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <_NEC DVD_RW ND-3540A, , 1.01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(cmdide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
kbd0: reset failed
wskbd0: connecting to wsdisplay1
Kernelized RAIDframe activated
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 625142272 (305245 MB)
root on raid0a dumps on raid0b
root file system type: ffs