Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2016-01-09 02:43:50
From: Mark Saad
Description: HP ML10 Gen9 FreeBSD 10-STABLE
CConsoles: internal video/keyboard  serial port  
 BIOS drive A: is disk0
BBIOS drive C: is disk1
BBIOS drive D: is disk2
BBIOS 590kB/3955536kB available memory
|
 FreeBSD/x86 ZFS enabled bootstrap loader, Revision 1.1
F([_EMAIL_XXXXXXXXXXXXXXXXXXX], Wed Jan  6 20:06:53 UTC 2016)
LLoading /boot/defaults/loader.conf 
Table 'FACP' at 0xf17d4b80
Table 'SPCR' at 0xf17d4140
Table 'MCFG' at 0xf17d41c0
Table 'HPET' at 0xf17d4200
Table 'FFFF' at 0xf17d4240
Table 'SPMI' at 0xf17d42c0
Table 'ERST' at 0xf17d4300
Table 'APIC' at 0xf17d4500
APIC: Found table at 0xf17d4500
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 4: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 6: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
MADT: Found CPU APIC ID 0 ACPI ID 0: disabled
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-STABLE #0: Sat Jan  9 02:34:08 UTC 2016
    root@rangefinder:/usr/obj/usr/src/sys/INSECURE amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81cae000.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81caed18.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff81caf540.
Calibrating TSC clock ... TSC clock: 3093037436 Hz
CPU: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz (3093.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306a9  Family=0x6  Model=0x3a  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
        Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
        Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
        Secondary Processor Controls=0x8ff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,RDRAND>
        Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
        Entry Controls=0xda0400
        EPT Features=0x6114141<XO,PW4,UC,WB,2M,INVEPT,single,all>
        VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
  TSC: P-state invariant, performance statistics
Data TLB0: 2-MByte or 4 MByte pages, 4-way set associative, 32 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
Instruction TLB: 2M/4M pages, fully associative, 8 entries
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
64-Byte prefetching
Shared 2nd-Level TLB: 4 KByte pages, 4-way associative, 512 entries
L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
real memory  = 17179869184 (16384 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000008ffff, 524288 bytes (128 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000001cfe000 - 0x00000000f17d3fff, 4021116928 bytes (981718 pages)
0x00000000f17de000 - 0x00000000f17defff, 4096 bytes (1 pages)
0x0000000100000000 - 0x00000003f19c3fff, 12643483648 bytes (3086788 pages)
avail memory = 16562167808 (15794 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
 cpu2 (AP): APIC ID:  4
 cpu3 (AP): APIC ID:  6
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 4
APIC: CPU 3 has ACPI ID 6
x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x010000-0x010fff at 0xfffffe03e5880000
x86bios: EBDA 0x093000-0x09ffff at 0xfffff80000093000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
lapic0: CMCI unmasked
XEN: CPU 0 has VCPU ID 0
XEN: CPU 1 has VCPU ID 2
XEN: CPU 2 has VCPU ID 4
XEN: CPU 3 has VCPU ID 6
random device not loaded; using insecure entropy
KDB: stack backtrace:
#0 0xffffffff8098c000 at kdb_backtrace+0x60
#1 0xffffffff806c11d7 at read_random_phony+0x37
#2 0xffffffff80a06e86 at arc4rand+0x86
#3 0xffffffff8097d298 at __stack_chk_init+0x18
#4 0xffffffff808f6a88 at mi_startup+0x108
#5 0xffffffff802e1c0c at btext+0x2c
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP    )
ACPI: XSDT 0x00000000F17D4A80 0000A4 (v01 HP     ProLiant 00000002 ??   0000162E)
ACPI: FACP 0x00000000F17D4B80 0000F4 (v03 HP     ProLiant 00000002 ??   0000162E)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150515/tbfadt-644)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20150515/tbfadt-644)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150515/tbfadt-725)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20150515/tbfadt-725)
ACPI: DSDT 0x00000000F17D4C80 001A41 (v01 HP     DSDT     00000001 INTL 20030228)
ACPI: FACS 0x00000000F17D4100 000040
ACPI: SPCR 0x00000000F17D4140 000050 (v01 HP     SPCRRBSU 00000001 ??   0000162E)
ACPI: MCFG 0x00000000F17D41C0 00003C (v01 HP     ProLiant 00000001      00000000)
ACPI: HPET 0x00000000F17D4200 000038 (v01 HP     ProLiant 00000002 ??   0000162E)
ACPI: FFFF 0x00000000F17D4240 000064 (v02 HP     ProLiant 00000002 ??   0000162E)
ACPI: SPMI 0x00000000F17D42C0 000040 (v05 HP     ProLiant 00000001 ??   0000162E)
ACPI: ERST 0x00000000F17D4300 0001D0 (v01 HP     ProLiant 00000001 ??   0000162E)
ACPI: APIC 0x00000000F17D4500 000252 (v01 HP     ProLiant 00000002      00000000)
ACPI: FFFF 0x00000000F17D4780 000176 (v01 HP     ProLiant 00000001 ??   0000162E)
ACPI: BERT 0x00000000F17D4900 000030 (v01 HP     ProLiant 00000001 ??   0000162E)
ACPI: HEST 0x00000000F17D4940 0000BC (v01 HP     ProLiant 00000001 ??   0000162E)
ACPI: DMAR 0x00000000F17D4A00 000070 (v01 HP     ProLiant 00000001 ??   0000162E)
ACPI: SSDT 0x00000000F17D6700 000125 (v03 HP     CRSPCI0  00000002 HP   00000001)
ACPI: SSDT 0x00000000F17D6840 000573 (v03 HP     riser0   00000002 INTL 20030228)
ACPI: SSDT 0x00000000F17D6DC0 00014B (v01 HP     pcc      00000001 INTL 20090625)
ACPI: SSDT 0x00000000F17D6F40 0009E4 (v01 INTEL  PPM RCM  80000001 INTL 20061109)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 8
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
null: <null device, zero device>
nfslock: pseudo-device
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
VESA: INT 0x10 vector 0xf000:0xe608
VESA: information block
0000   56 45 53 41 00 03 4a 57 00 c0 01 00 00 00 b7 53
0010   00 c0 80 00 08 03 5f 57 00 c0 66 57 00 c0 6f 57
0020   00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0040   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0050   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0060   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0070   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0080   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0090   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0100   4d 61 74 72 6f 78 00 4d 47 41 2d 47 32 30 30 00
0110   30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0120   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0130   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0140   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0150   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0170   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 21 mode(s) found
VESA: v3.0, 8192k memory, flags:0x1, mode table:0xfffff800000c53b7 (c00053b7)
VESA: Matrox Graphics Inc.
VESA: Matrox MGA-G200 00
io: <I/O>
VMBUS: load
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
hptnr: R750/DC7280 controller driver v1.1.4
hpt27xx: RocketRAID 27xx controller driver v1.2.7
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <HP ProLiant> on motherboard
ACPI: All ACPI Tables successfully acquired
PCIe: Memory Mapped configuration base @ 0xf4000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
cpu0: Processor \_PR_.CP00 (ACPI ID 0) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
ACPI: Processor \_PR_.CP01 (ACPI ID 1) ignored
cpu1: Processor \_PR_.CP02 (ACPI ID 2) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
ACPI: Processor \_PR_.CP03 (ACPI ID 3) ignored
cpu2: Processor \_PR_.CP04 (ACPI ID 4) -> APIC ID 2
cpu2: <ACPI CPU> on acpi0
ACPI: Processor \_PR_.CP05 (ACPI ID 5) ignored
cpu3: Processor \_PR_.CP06 (ACPI ID 6) -> APIC ID 3
cpu3: <ACPI CPU> on acpi0
ACPI: Processor \_PR_.CP07 (ACPI ID 7) ignored
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route
hpet0:  t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
hpet0:  t1: irqs 0x00f00000 (0), MSI
hpet0:  t2: irqs 0x00f00800 (0), MSI
hpet0:  t3: irqs 0x00f01000 (0), MSI
hpet0:  t4: irqs 0x00000000 (0), MSI
hpet0:  t5: irqs 0x00000000 (0), MSI
hpet0:  t6: irqs 0x00000000 (0), MSI
hpet0:  t7: irqs 0x00000000 (0), MSI
Timecounter "HPET" frequency 14318180 Hz quality 950
msi: routing MSI-X IRQ 256 to local APIC 0 vector 50
msi: routing MSI-X IRQ 257 to local APIC 0 vector 51
msi: routing MSI-X IRQ 258 to local APIC 0 vector 52
msi: routing MSI-X IRQ 259 to local APIC 0 vector 53
msi: routing MSI-X IRQ 260 to local APIC 0 vector 54
msi: routing MSI-X IRQ 261 to local APIC 0 vector 55
msi: routing MSI-X IRQ 262 to local APIC 0 vector 56
msi: routing MSI-X IRQ 263 to local APIC 0 vector 57
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 58
Event timer "RTC" frequency 32768 Hz quality 0
ACPI timer: 1/1 1/2 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  5 7 10 11
  Validation          0   11   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  5 7 10 11
  Validation          0    7   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11
  Validation          0  255   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  5 7 10 11
  Validation          0   10   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  5 7 10 11
  Validation          0    5   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  5 7 10 11
  Validation          0  255   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11
  Validation          0  255   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11
  Validation          0  255   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: decoding 5 range 0-0x13
pcib0: decoding 3 range 0xf8000000-0xfbffffff
pcib0: decoding 4 range 0x1000-0xffff
pcib0: decoding 4 range 0-0x3af
pcib0: decoding 4 range 0x3e0-0xcf7
pcib0: decoding 4 range 0xd00-0xfff
pcib0: decoding 3 range 0xfed00000-0xfed03fff
pcib0: decoding 3 range 0xfed00000-0xfed44fff
pcib0: decoding 4 range 0x3b0-0x3bb
pcib0: decoding 4 range 0x3c0-0x3df
pcib0: decoding 3 range 0xa0000-0xbffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x0158, revid=0x09
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x1c2d, revid=0x05
	domain=0, bus=0, slot=26, func=0
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfacd0000, size 10, enabled
pcib0: allocated type 3 (0xfacd0000-0xfacd03ff) for rid 10 of pci0:0:26:0
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 21
ehci early: SMM active, request owner change
found->	vendor=0x8086, dev=0x1c10, revid=0xb5
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	secbus=10, subbus=10
found->	vendor=0x8086, dev=0x1c18, revid=0xb5
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	secbus=2, subbus=2
found->	vendor=0x8086, dev=0x1c1e, revid=0xb5
	domain=0, bus=0, slot=28, func=7
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=255
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
	secbus=1, subbus=1
found->	vendor=0x8086, dev=0x1c26, revid=0x05
	domain=0, bus=0, slot=29, func=0
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfacc0000, size 10, enabled
pcib0: allocated type 3 (0xfacc0000-0xfacc03ff) for rid 10 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
ehci early: SMM active, request owner change
found->	vendor=0x8086, dev=0x244e, revid=0xa5
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	secbus=19, subbus=19
found->	vendor=0x8086, dev=0x1c54, revid=0x05
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x1c02, revid=0x05
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=7
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type I/O Port, range 32, base 0x10c0, size  3, enabled
pcib0: allocated type 4 (0x10c0-0x10c7) for rid 10 of pci0:0:31:2
	map[14]: type I/O Port, range 32, base 0x10c8, size  2, enabled
pcib0: allocated type 4 (0x10c8-0x10cb) for rid 14 of pci0:0:31:2
	map[18]: type I/O Port, range 32, base 0x10d0, size  3, enabled
pcib0: allocated type 4 (0x10d0-0x10d7) for rid 18 of pci0:0:31:2
	map[1c]: type I/O Port, range 32, base 0x10d8, size  2, enabled
pcib0: allocated type 4 (0x10d8-0x10db) for rid 1c of pci0:0:31:2
	map[20]: type I/O Port, range 32, base 0x10e0, size  5, enabled
pcib0: allocated type 4 (0x10e0-0x10ff) for rid 20 of pci0:0:31:2
	map[24]: type Memory, range 32, base 0xfacb0000, size 11, enabled
pcib0: allocated type 3 (0xfacb0000-0xfacb07ff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfacd0000-0xfacd03ff irq 21 at device 26.0 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 59
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     10
pcib1:   subordinate bus   10
pci10: <ACPI PCI bus> on pcib1
pcib1: allocated bus range (10-10) for rid 0 of pci10
pci10: domain=0, physical bus=10
pcib2: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib2
pcib0: allocated type 3 (0xfbf00000-0xfbffffff) for rid 20 of pcib2
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x4000-0x4fff
pcib2:   memory decode     0xfbf00000-0xfbffffff
pci2: <ACPI PCI bus> on pcib2
pcib2: allocated bus range (2-2) for rid 0 of pci2
pci2: domain=0, physical bus=2
found->	vendor=0x8086, dev=0x10d3, revid=0x00
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 5 messages in map 0x1c
	map[10]: type Memory, range 32, base 0xfbfe0000, size 17, enabled
pcib2: allocated memory range (0xfbfe0000-0xfbffffff) for rid 10 of pci0:2:0:0
	map[18]: type I/O Port, range 32, base 0x4000, size  5, enabled
pcib2: allocated I/O port range (0x4000-0x401f) for rid 18 of pci0:2:0:0
	map[1c]: type Memory, range 32, base 0xfbfd0000, size 14, enabled
pcib2: allocated memory range (0xfbfd0000-0xfbfd3fff) for rid 1c of pci0:2:0:0
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x4000-0x401f mem 0xfbfe0000-0xfbffffff,0xfbfd0000-0xfbfd3fff irq 16 at device 0.0 on pci2
em0: attempting to allocate 3 MSI-X vectors (5 supported)
msi: routing MSI-X IRQ 264 to local APIC 0 vector 60
msi: routing MSI-X IRQ 265 to local APIC 0 vector 61
msi: routing MSI-X IRQ 266 to local APIC 0 vector 62
em0: using IRQs 264-266 for MSI-X
em0: Using MSIX interrupts with 3 vectors
em0: bpf attached
em0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib3: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pcib0: allocated type 4 (0x2000-0x3fff) for rid 1c of pcib3
pcib0: allocated type 3 (0xfad00000-0xfbefffff) for rid 20 of pcib3
pcib0: allocated type 3 (0xf9000000-0xf9ffffff) for rid 24 of pcib3
pcib3:   domain            0
pcib3:   secondary bus     1
pcib3:   subordinate bus   1
pcib3:   I/O decode        0x2000-0x3fff
pcib3:   memory decode     0xfad00000-0xfbefffff
pcib3:   prefetched decode 0xf9000000-0xf9ffffff
pcib3:   special decode    VGA
pci1: <ACPI PCI bus> on pcib3
pcib3: allocated bus range (1-1) for rid 0 of pci1
pci1: domain=0, physical bus=1
found->	vendor=0x103c, dev=0x3306, revid=0x05
	domain=0, bus=1, slot=0, func=0
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type I/O Port, range 32, base 0x3000, size  8, enabled
pcib3: allocated I/O port range (0x3000-0x30ff) for rid 10 of pci0:1:0:0
	map[14]: type Memory, range 32, base 0xfbef0000, size  9, enabled
pcib3: allocated memory range (0xfbef0000-0xfbef01ff) for rid 14 of pci0:1:0:0
	map[18]: type I/O Port, range 32, base 0x3400, size  8, enabled
pcib3: allocated I/O port rage (0x3400-0x34ff) for rid 18 of pci0:1:0:0
pcib3: matched entry for 1.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 19
found->	vendor=0x102b, dev=0x0533, revid=0x00
	domain=0, bus=1, slot=0, func=1
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 32, base 0xf9000000, size 24, enabled
pcib3: allocated prefetch range (0xf9000000-0xf9ffffff) for rid 10 of pci0:1:0:1
	map[14]: type Memory, range 32, base 0xfbee0000, size 14, enabled
pcib3: allocated memory range (0xfbee0000-0xfbee3fff) for rid 14 of pci0:1:0:1
	map[18]: type Memory, range 32, base 0xfb000000, size 23, enabled
pcib3: allocated memory range (0xfb000000-0xfb7fffff) for rid 18 of pci0:1:0:1
pcib3: matched entry for 1.0.INTB
pcib3: slot 0 INTB hardwired to IRQ 16
found->	vendor=0x103c, dev=0x3307, revid=0x05
	domain=0, bus=1, slot=0, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type I/O Port, range 32, base 0x3800, size  8, enabled
pcib3: allocated I/O port range (0x3800-0x38ff) for rid 10 of pci0:1:0:2
	map[14]: type Memory, range 32, base 0xfaff0000, size  8, enabled
pcib3: allocated memory range (0xfaff0000-0xfaff00ff) for rid 14 of pci0:1:0:2
	map[18]: type Memory, range 32, base 0xfae00000, size 20, enabled
pcib3: allocated memory range (0xfae00000-0xfaefffff) for rid 18 of pci0:1:0:2
	map[1c]: type Memory, range 32, base 0xfad80000, size 19, enabled
pcib3: allocated memory range (0xfad80000-0xfadfffff) for rid 1c of pci0:1:0:2
	map[20]: type Memory, range 32, base 0xfad70000, size 15, enabled
pcib3: allocated memory range (0xfad70000-0xfad77fff) for rid 20 of pci0:1:0:2
	map[24]: type Memory, range 32, base 0xfad60000, size 15, enabled
pcib3: allocated memory range (0xfad60000-0xfad67fff) for rid 24 of pci0:1:0:2
pcib3: matched entry for 1.0.INTB
pcib3: slot 0 INTB hardwired to IRQ 16
found->	vendor=0x103c, dev=0x3300, revid=0x02
	domain=0, bus=1, slot=0, func=4
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0045, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[20]: type I/O Port, range 32, base 0x2000, size  5, enabled
pcib3: allocated I/O port range (0x2000-0x201f) for rid 20 of pci0:1:0:4
pcib3: matched entry for 1.0.INTB
pcib3: slot 0 INTB hardwired to IRQ 16
pci1: <base peripheral> at device 0.0 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbee0000-0xfbee3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci1
vgapci0: Boot video device
pci1: <base peripheral> at device 0.2 (no driver attached)
uhci0: <HP iLO Standard Virtual USB controller> port 0x2000-0x201f irq 16 at device 0.4 on pci1
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 63
usbus1 on uhci0
uhci0: usbpf: Attached
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfacc0000-0xfacc03ff irq 20 at device 29.0 on pci0
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 64
usbus2: EHCI version 1.0
usbus2 on ehci1
ehci1: usbpf: Attached
pcib4: <PCI-PCI bridge> at device 30.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     19
pcib4:   subordinate bus   19
pcib4:   special decode    subtractive
pci19: <PCI bus> on pcib4
pcib4: allocated bus range (19-19) for rid 0 of pci19
pci19: domain=0, physical bus=19
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0x10c0-0x10c7,0x10c8-0x10cb,0x10d0-0x10d7,0x10d8-0x10db,0x10e0-0x10ff mem 0xfacb0000-0xfacb07ff irq 17 at device 31.2 on pci0
ahci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 267 to local APIC 0 vector 65
ahci0: using IRQ 267 for MSI
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ SNTF MPS SS ALP AL CLO 6Gbps PM PMD SSC PSC 32cmd EM 6ports
ahci0: Caps2: APST
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps: HPCP MPSP
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps: HPCP MPSP
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps: HPCP MPSP
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps: HPCP MPSP
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps: HPCP MPSP
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps: HPCP MPSP
ahciem0: <AHCI enclosure management bridge> on ahci0
ahciem0: Caps: ALHD XMT SMB LED
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 66
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 00 00 14
psm: status 10 00 64
psm: status 00 02 64
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 67
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
acpi0: wakeup code va 0xfffffe04688f3000 pa 0x14000
ex_isa_identify()
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
ahc_isa_identify 0: ioport 0xc00 alloc failed
ahc_isa_identify 1: ioport 0x1c00 alloc failed
ahc_isa_identify 2: ioport 0x2c00 alloc failed
ahc_isa_identify 3: ioport 0x3c00 alloc failed
ahc_isa_identify 4: ioport 0x4c00 alloc failed
ahc_isa_identify 5: ioport 0x5c00 alloc failed
ahc_isa_identify 6: ioport 0x6c00 alloc failed
ahc_isa_identify 7: ioport 0x7c00 alloc failed
ahc_isa_identify 8: ioport 0x8c00 alloc failed
ahc_isa_identify 9: ioport 0x9c00 alloc failed
ahc_isa_identify 10: ioport 0xac00 alloc failed
ahc_isa_identify 11: ioport 0xbc00 alloc failed
ahc_isa_identify 12: ioport 0xcc00 alloc failed
ahc_isa_identify 13: ioport 0xdc00 alloc failed
ahc_isa_identify 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
uart0: console (115200,n,8,1)
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 68
uart0: fast interrupt
uart0: PPS capture mode 2 (DCD)
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 214e00002100
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 214e00002100
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 214e00002100
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 214e00002100
device_attach: est3 attach returned 6
Device configuration finished.
procfs registered
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lapic: Divisor 2, Frequency 49887704 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072
lo0: bpf attached
hptnr: no controller detected.
hpt27xx: no controller detected.
hptrr: no controller detected.
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <HP> at usbus1
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ahcich0: SATA connect timeout time=10000us status=00000000
ahcich0: AHCI reset: device not found
ahcich1: AHCI reset...
ahcich1: SATA connect timeout time=10000us status=00000000
ahcich1: AHCI reset: device not found
ahcich2: AHCI reset...
ahcich2: SATA connect timeout time=10000us status=00000000
ahcich2: AHCI reset: device not found
ahcich3: AHCI reset...
ahcich3: SATA connect timeout time=10000us status=00000000
ahcich3: AHCI reset: device not found
ahcich4: AHCI reset...
ahcich4: SATA connect time=100us status=00000123
ahcich4: AHCI reset: device found
ahcich4: AHCI reset: device ready after 0ms
ahcich5: AHCI reset...
ahcich5: SATA connect time=100us status=00000123
uhub1: 2 ports with 2 removable, self powered
ahcich5: AHCI reset: device found
ahcich5: AHCI reset: device ready after 0ms
ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
GEOM: new disk ada0
ada0: <Hitachi HUA722010CLA330 JP4OA3MA> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada0: Previously was known as ad12
ada1 at ahcich5 bus 0 scbus5 target 0 lun 0
ada1: <Hitachi HUA722010CLA330 JP4OA3MA> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada1: Previously was known as ad14
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
pass0 at ahcich4 bus 0 scbus4 target 0 lun 0
pass0: ses0: Generation Code 0x0 has 1 SubEnclosures
ses0:  SubEnclosure ID 0, 1 Types With this ID, Descriptor Length 36, offset 8
uhub0: 2 ports with 2 removable, self powered
ses0: WWN: 0
ses0:  Type Desc[0]: Type 0x17, MaxElt 6, In Subenc 0, Text Length 0: 
<Hitachi HUA722010CLA330 JP4OA3MA> ATA8-ACS SATA 2.x device
pass0: [_SERIAL_NUMBER_XXXXXXXXXXX]
pass0: 300.000MB/s transfersuhub2: 2 ports with 2 removable, self powered
 (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
pass1 at ahcich5 bus 0 scbus5 target 0 lun 0
pass1: <Hitachi HUA722010CLA330 JP4OA3MA> ATA8-ACS SATA 2.x device
pass1: [_SERIAL_NUMBER_XXXXXXXXXXX]
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
pass2 at ahciem0 bus 0 scbus6 target 0 lun 0
pass2: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
GEOM: new disk ada1
Netvsc initializing... done!
lapic2: CMCI unmasked
lapic4: CMCI unmasked
SMP: AP CPU #1 Launched!
lapic6: CMCI unmasked
cpu1 AP:
     ID: 0x02000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #3 Launched!
cpu3 AP:
     ID: 0x06000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
SMP: AP CPU #2 Launched!
cpu2 AP:
     ID: 0x04000000   VER: 0x01060015 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
   cmci: 0x000000f2
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 2 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 4 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 6 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 2 vector 49
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 4 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 6 vector 49
msi: Assigning MSI-X IRQ 257 to local APIC 2 vector 50
msi: Assigning MSI-X IRQ 258 to local APIC 4 vector 50
msi: Assigning MSI-X IRQ 259 to local APIC 6 vector 50
msi: Assigning MSI-X IRQ 265 to local APIC 2 vector 51
msi: Assigning MSI IRQ 267 to local APIC 2 vector 52
SMP: passed TSC synchronization test
TSC timecounter discards lower 1 bit(s)
Timecounter "TSC-low" frequency 1546518718 Hz quality 1000
Root mount waiting for: usbus2 usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087> at usbus0
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus2 usbus0
uhub3: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
start_init: trying /sbin/init
Setting hostuuidem0: Link is up 100 Mbps Full Duplex
em0: link state changed to UP