Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2016-01-11 23:12:55
From: Sevan / Venture37
Description: Dell Mini 9 aka Inspiron 910 aka Vostro A90
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.25 (GENERIC.201601100840Z) #0: Sun Jan 10 11:15:52 UTC 2016
[_EMAIL_XXXXXXXXXXXX]:/home/builds/ab/HEAD/i386/201601100840Z-obj/home/source/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 1014 MB
avail memory = 979 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Inspiron 910 (A07)
mainbus0 (root)
ACPI: RSDP 0x00000000000F7F70 000024 (v02 PTLTD )
ACPI: XSDT 0x000000003F6DBED2 00006C (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 0x000000003F6E1D48 0000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
ACPI: DSDT 0x000000003F6DCDB7 004F1D (v01 INTEL CALISTGA 06040000 INTL 20050624)
ACPI: FACS 0x000000003F6E2FC0 000040
ACPI: FACS 0x000000003F6E2FC0 000040
ACPI: APIC 0x000000003F6E1E3C 000068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: HPET 0x000000003F6E1EA4 000038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 0x000000003F6E1EDC 00003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: TCPA 0x000000003F6E1F18 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
ACPI: TMOR 0x000000003F6E1F4A 000026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: APIC 0x000000003F6E1F70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x000000003F6E1FD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 0x000000003F6DBF3E 0004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, id 0x106c2
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, id 0x106c2
acpi0 at mainbus0: Intel ACPICA 20160108
acpi0: X/RSDT: OemId <PTLTD , XSDT ,06040000>, AslId < LTP,00000000>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C2753C4C 000245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C263900C 0005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C265DE0C 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C2751F1C 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09)
: io 0x62,0x66
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
EMSC (CPL0002) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100]
acpiout1 at acpivga0 (CRT1, 0x0100): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0, bios detect
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
FWHD (INT0800) at acpi0 not configured
MATH (PNP0C04) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
CDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0601) (aux port): irq 12
acpitz0 at acpi0 (TZ01): cpu0 cpu1
acpitz0: levels: critical 102.0 C, passive 95.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 3 GPEs in block 00 to 1F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.0
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 27ac (rev. 0x03)
agp0 at pchb0: i915-family chipset
agp0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 27ae (rev. 0x03)
drm: Memory usable by graphics device = 256M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
drm: failed to find VBIOS tables
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: initialized overlay support
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xda0ba000, size 1024x600, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 27a6 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: vendor 10ec product 0268
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 197b product 2382 (miscellaneous system) at pci1 dev 0 function 0 not configured
sdhc0 at pci1 dev 0 function 2: vendor 197b product 2381 (rev. 0x00)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 2.0, rev 172, SDMA, 50000 kHz, 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
vendor 197b product 2383 (miscellaneous system) at pci1 dev 0 function 3 not configured
ppb1 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 14e4 product 4315 (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 8086 product 27d4 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x02)
re0: interrupting at msi0 vec 0
re0: Ethernet address 00:21:70:
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xe2)
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27b9 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 20 us, pow 500 mW
acpicpu0: C3: FFH, lat 100 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 1600 MHz
acpicpu0: P1: FFH, lat 10 us, pow 28000 mW, 1333 MHz
acpicpu0: P2: FFH, lat 10 us, pow 22000 mW, 1067 MHz
acpicpu0: P3: FFH, lat 10 us, pow 16000 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uvideo0 at uhub4 port 2 configuration 1 interface 0: Sonix Technology Co., Ltd. Integrated Webcam, rev 2.00/87.21, addr 2
video0 at uvideo0: Sonix Technology Co., Ltd. Integrated Webcam, rev 2.00/87.21, addr 2
ehci0: handing over full speed device on port 7 to uhci3
wd0 at atabus0 drive 0
wd0: <STEC PATA 16GB>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 14694 MB, 29855 cyl, 16 head, 63 sec, 512 bytes/sect x 30093840 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/7.99.25/modules
ubt0 at uhub3wsdisplay0: screen 1 added (default port 1, vt100 emulation)
ubt0: Broadcom Corp BCM2046 Bluetooth Device, rev 2.00/4.67, addr 2
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)