Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2016-02-12 20:01:41
From: ajcc
Description: NetBSD/amd64 7.0 on HP dc7800p SFF
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0 (GENERIC.201509250726Z)
total memory = 6063 MB
avail memory = 5869 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Compaq dc7800p Small Form Factor ( )
mainbus0 (root)
ACPI: RSDP 0xe5c10 000014 (v00 COMPAQ)
ACPI: RSDT 0xdefc1e40 000044 (v01 HPQOEM SLIC-BPC 20110721 00000000)
ACPI: FACP 0xdefc1ee8 000074 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: DSDT 0xdefc2427 009D30 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 0xdefc1e00 000040
ACPI: APIC 0xdefc1f5c 000084 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: ASF! 0xdefc1fe0 000063 (v32 COMPAQ BEARLAKE 00000001 00000000)
ACPI: MCFG 0xdefc2043 00003C (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: TCPA 0xdefc207f 000032 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: SLIC 0xdefc20b1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: HPET 0xdefc2227 000038 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: DMAR 0xdefc225f 000160 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, id 0x6fb
cpu1 at mainbus0 apid 2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, id 0x6fb
cpu2 at mainbus0 apid 3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, id 0x6fb
cpu3 at mainbus0 apid 1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, id 0x6fb
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,20110721>, AslId < ,00000000>
ACPI: SSDT 0xdefcd42b 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: SSDT 0x0 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
ECP0 (PNP0401) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
TPM (IFX0102) at acpi0 not configured
SBD1 (PNP0C02) at acpi0 not configured
SBD2 (PNP0C02) at acpi0 not configured
SBD3 (PNP0C02) at acpi0 not configured
IEIT (INT5400) at acpi0 not configured
MBRD (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x29b0 (rev. 0x02)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29b1 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0163 (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x29b4 (miscellaneous communications, revision 0x02) at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2: vendor 0x8086 product 0x29b6 (rev. 0x02)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
puc0 at pci0 dev 3 function 3: Intel Q35 KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0x1220, interrupting at ioapic0 pin 17
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: 82801I (AMT) LAN Controller (rev. 0x02)
wm0: interrupting at ioapic0 pin 19
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 21
hdafg0 at hdaudio0: ADI AD1884
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: ADC01 2ch: Line In [Jack]
hdafg0: DAC02 2ch: HP Out [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 32
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 48
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci4 at ppb3 bus 7
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2914 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2822 (rev. 0x02)
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xe720ff85<CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 10 us, pow 135000 mW, 2400 MHz
acpicpu0: P1: FFH, lat 10 us, pow 72165 mW, 1596 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=100
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 4 ports with 4 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 4: device present, speed: 3.0Gb/s
ahcisata0 port 1: PHY offline
ahcisata0 port 5: PHY offline
wd0 at atabus2 drive 0
wd0: <SanDisk SDSSDHP128G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: GPT GUID: 647b31de-0fc9-4e47-b25c-ea328998fe8a
dk0 at wd0: e8ff58d4-a83d-44a9-a1ed-a7f81f507ad8
dk0: 16778160 blocks at 34, type: ffs
dk1 at wd0: 8f822359-91cb-41ee-b67e-26d4623cffd2
dk1: 33555312 blocks at 16778194, type: ffs
dk2 at wd0: 95eb1bb0-f306-460c-adc4-9144781be02f
dk2: 4195296 blocks at 50333506, type: ffs
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus4 drive 0
wd1: <ST1000DM003-1ER162>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: GPT GUID: dc85f21a-43e4-40e2-81f0-4201cba7a40c
dk3 at wd1: 44e8ad43-d395-47d1-8d16-f4b7c5cd79d3
dk3: 4195296 blocks at 34, type: swap
dk4 at wd1: 1be6bc80-7ffe-4516-8d11-64df15caf96f
dk4: 1073741726 blocks at 4195330, type: ffs
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: vendor 0x05e3 USB2.0 card Reader, rev 2.00/91.35, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 5 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, STORAGE DEVICE, 9135> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <Generic, STORAGE DEVICE, 9135> disk removable
sd1: drive offline
sd2 at scsibus0 target 0 lun 2: <Generic, STORAGE DEVICE, 9135> disk removable
sd2: drive offline
sd3 at scsibus0 target 0 lun 3: <Generic, STORAGE DEVICE, 9135> disk removable
sd3: drive offline
sd4 at scsibus0 target 0 lun 4: <Generic, STORAGE DEVICE, 9135> disk removable
sd4: drive offline
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on dk0 dumps on dk3
root file system type: ffs
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Logitech USB Trackball, rev 1.10/14.00, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons
wsmouse0 at ums0 mux 0