Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-02-21 01:59:02
From: ajcc
Description: OpenBSD/macppc 5.9-snapshot on PowerMac G5
[ using 560512 bytes of bsd ELF symbol table ] console out [NVDA,Display-B] console in [keyboard], using USB using parent NVDA,Parent:: memaddr 98000000, size 8000000 : consaddr 98004000 : ioaddr 91000000, size 1000000: width 1280 linebytes 1536 height 1024 depth 8 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2016 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.9 (GENERIC) #906: Sat Feb 20 08:55:40 MST 2016 [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC real mem = 1610612736 (1536MB) avail mem = 1528545280 (1457MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: model PowerMac9,1 cpu0 at mainbus0: 970FX (Revision 0x300): 1800 MHz mem0 at mainbus0 spdmem0 at mem0: 256MB DDR SDRAM non-parity PC3200CL3.0 spdmem1 at mem0: 256MB DDR SDRAM non-parity PC3200CL3.0 spdmem2 at mem0: 512MB DDR SDRAM non-parity PC3200CL2.5 spdmem3 at mem0: 512MB DDR SDRAM non-parity PC3200CL2.5 memc0 at mainbus0: u3 rev 0x39 kiic0 at memc0 offset 0xf8001000 iic0 at kiic0 "dart" at memc0 offset 0xf8033000 not configured "mpic" at memc0 offset 0xf8040000 not configured mpcpcibr0 at mainbus0 pci: u3-agp pci0 at mpcpcibr0 bus 0 pchb0 at pci0 dev 11 function 0 "Apple U3L AGP" rev 0x00 appleagp0 at pchb0 agp0 at appleagp0: aperture at 0x0, size 0x10000000 vgafb0 at pci0 dev 16 function 0 "NVIDIA GeForce FX 5200 Ultra" rev 0xa1 wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) ht0 at mainbus0: u3-ht, 4 devices pci1 at ht0 bus 0 hpb0 at pci1 dev 1 function 0 "Apple Shasta PCI" rev 0x00: 85 sources pci2 at hpb0 bus 3 gem0 at pci2 dev 15 function 0 "Apple Shasta GMAC" rev 0x00: irq 40, address [_MAC_XXXXXXXXXX] brgphy0 at gem0 phy 0: BCM5462 10/100/1000baseT PHY, rev. 2 ppb0 at pci1 dev 2 function 0 "Apple Shasta PCI" rev 0x00 pci3 at ppb0 bus 1 macobio0 at pci3 dev 7 function 0 "Apple Shasta" rev 0x00 openpic0 at macobio0 offset 0x40000: version 0x4614 feature 7b0302 LE macgpio0 at macobio0 offset 0x50 "smu-doorbell" at macgpio0 offset 0x12 not configured "smu-interrupt" at macgpio0 offset 0xd not configured "programmer-switch" at macgpio0 offset 0xc not configured "modem-reset" at macgpio0 offset 0x8 not configured "modem-power" at macgpio0 offset 0x16 not configured "slewing-done" at macgpio0 offset 0x38 not configured "dig-hw-reset-c" at macgpio0 offset 0x9 not configured "lineout-detect" at macgpio0 offset 0x28 not configured "linein-detect" at macgpio0 offset 0x2a not configured "headphone-detect" at macgpio0 offset 0x2c not configured "lineout-mute" at macgpio0 offset 0x2e not configured "headphone-mute" at macgpio0 offset 0x2f not configured "amp-mute" at macgpio0 offset 0x30 not configured "codec-clock-mux" at macgpio0 offset 0x31 not configured "codec-error-irq" at macgpio0 offset 0x32 not configured "dig-hw-reset-a" at macgpio0 offset 0x33 not configured "hw-reset" at macgpio0 offset 0x34 not configured "escc-legacy" at macobio0 offset 0x12000 not configured zs0 at macobio0 offset 0x13000: irq 23,24 zstty0 at zs0 channel 0 zstty1 at zs0 channel 1 kiic1 at macobio0 offset 0x18000 iic1 at kiic1 "i2s" at macobio0 offset 0x0 not configured "timer" at macobio0 offset 0x15000 not configured ohci0 at pci3 dev 11 function 0 "NEC USB" rev 0x43: irq 70, version 1.0 ohci1 at pci3 dev 11 function 1 "NEC USB" rev 0x43: irq 70, version 1.0 ehci0 at pci3 dev 11 function 2 "NEC USB" rev 0x04: irq 70 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1 usb2 at ohci1: USB revision 1.0 uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1 ppb1 at pci1 dev 3 function 0 "Apple Shasta PCI" rev 0x00 pci4 at ppb1 bus 2 pciide0 at pci4 dev 12 function 0 "ServerWorks K2 SATA" rev 0x00: DMA pciide0: using irq 10 for native-PCI interrupt pciide0: port 0: PHY offline pciide0: port 1: PHY offline kauaiata0 at pci4 dev 13 function 0 "Apple Shasta ATA" rev 0x00 wdc0 at kauaiata0 irq 38: DMA wd0 at wdc0 channel 0 drive 0: <ST320011A> wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors atapiscsi0 at wdc0 channel 0 drive 1 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-117D, B705> ATAPI 5/cdrom removable wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 "Apple Shasta Firewire" rev 0x00 at pci4 dev 14 function 0 not configured smu0 at mainbus0 iic2 at smu0 lmtemp0 at iic2 addr 0x4a: ds1775 maxds0 at iic2 addr 0x4b: ds1631 "smu-pulsar" at iic2 addr 0x6a not configured uhub3 at uhub1 port 2 "Mitsumi Electric Hub in Apple Extended USB Keyboard" rev 1.10/3.95 addr 2 uhidev0 at uhub3 port 3 configuration 1 interface 0 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/3.95 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13 wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub3 port 3 configuration 1 interface 1 "Mitsumi Electric Apple Extended USB Keyboard" rev 1.10/3.95 addr 3 uhidev1: iclass 3/0, 3 report ids uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 uhidev2 at uhub1 port 3 configuration 1 interface 0 "Apple Computer HID-proxy" rev 1.10/12.41 addr 4 uhidev2: iclass 3/1 ukbd1 at uhidev2: 8 variable keys, 6 key codes wskbd1 at ukbd1 mux 1 wskbd1: connecting to wsdisplay0 uhidev3 at uhub1 port 3 configuration 1 interface 1 "Apple Computer HID-proxy" rev 1.10/12.41 addr 4 uhidev3: iclass 3/1 ums0 at uhidev3: 5 buttons wsmouse0 at ums0 mux 0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets bootpath: /ht/pci@3/ata-6/disk@0:/bsd root on wd0a (d6489761d38e3783.a) swap on wd0b dump on wd0b