Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-03-06 15:08:39
From: kamil_at_NetBSD
Description: Intel i7-3770
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.26 (GENERIC) #0: Wed Feb 10 21:58:18 UTC 2016
root@chieftec:/tmp/netbsd-tmp/sys/arch/amd64/compile/GENERIC
total memory = 32657 MB
avail memory = 31690 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Gigabyte Technology Co., Ltd. To be filled by O.E.M. (To be filled by O.E.M.)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D9AE0070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D9AEA9C8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D9AE0170 00A855 (v02 ALASKA A M I 00000012 INTL 20051117)
ACPI: FACS 0x00000000D9AFEF80 000040
ACPI: APIC 0x00000000D9AEAAC0 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000D9AEAB58 00003C (v01 01072009 MSFT 00000097)
ACPI: HPET 0x00000000D9AEAB98 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D9AEABD0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000D9AEAF40 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000D9AEB8F0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000D9AEC388 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu4 at mainbus0 apid 1
cpu4: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu5 at mainbus0 apid 3
cpu5: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu6 at mainbus0 apid 5
cpu6: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu7 at mainbus0 apid 7
cpu7: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
acpi0 at mainbus0: Intel ACPICA 20160108
acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE813A4F0010 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE813A4F9C10 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE813A42B5D0 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)
acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
UAR1 (PNP0501) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0,5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 85.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 106.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
acpitz1: levels: critical 106.0 C, passive 106.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0150 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0162 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: Wrong MCH_SSKPD value: 0x20100406
drm: This can cause pipe underruns and display issues.
drm: Please upgrade your BIOS to fix this.
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800239d29000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 1e31 (USB serial bus, xHCI, revision 0x04) at pci0 dev 20 function 0 not configured
vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: vendor 1106 product 0441
hdafg0: DAC00 6ch: Speaker [Jack], HP Out [Jack]
hdafg0: ADC01 2ch: Line In [Jack], Mic In [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: DIG03 2ch: SPDIF Out [Jack]
hdafg0: 6ch/2ch 48000Hz PCM16*
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg1 at hdaudio0: vendor 8086 product 2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 4: vendor 8086 product 1e18 (rev. 0xc4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 1106 product 3432 (USB serial bus, xHCI, revision 0x03) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 5: vendor 8086 product 244e (rev. 0xc4)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci3 dev 0 function 0: vendor 8086 product 244e (rev. 0x41)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 6: vendor 8086 product 1e1c (rev. 0xc4)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
alc0 at pci5 dev 0 function 0: Atheros AR8161 PCIe Gigabit Ethernet
alc0: interrupting at ioapic0 pin 18
alc0: Ethernet address [_MAC_XXXXXXXXXX]
atphy0 at alc0 phy 0: Atheros AR8035 10/100/1000 PHY, rev. 9
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb5 at pci0 dev 28 function 7: vendor 8086 product 1e1e (rev. 0xc4)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci6 dev 0 function 0: vendor 1b4b product 9172 (rev. 0x11)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.0, 2 ports, 32 slots, CAP 0xe237ff21<SXS,PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SAL,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e44 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata1 at pci0 dev 31 function 2: vendor 8086 product 1e02 (rev. 0x04)
ahcisata1: interrupting at ioapic0 pin 19
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc330ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SNCQ,S64A>
atabus2 at ahcisata1 channel 0
atabus3 at ahcisata1 channel 3
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C3: FFH, lat 80 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 77000 mW, 3901 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 77000 mW, 3900 MHz
acpicpu0: P2: FFH, lat 10 us, pow 70739 mW, 3700 MHz
acpicpu0: P3: FFH, lat 10 us, pow 68437 mW, 3600 MHz
acpicpu0: P4: FFH, lat 10 us, pow 63225 mW, 3400 MHz
acpicpu0: P5: FFH, lat 10 us, pow 58214 mW, 3200 MHz
acpicpu0: P6: FFH, lat 10 us, pow 55420 mW, 3100 MHz
acpicpu0: P7: FFH, lat 10 us, pow 50680 mW, 2900 MHz
acpicpu0: P8: FFH, lat 10 us, pow 46130 mW, 2700 MHz
acpicpu0: P9: FFH, lat 10 us, pow 43586 mW, 2600 MHz
acpicpu0: P10: FFH, lat 10 us, pow 39298 mW, 2400 MHz
acpicpu0: P11: FFH, lat 10 us, pow 36901 mW, 2300 MHz
acpicpu0: P12: FFH, lat 10 us, pow 32887 mW, 2100 MHz
acpicpu0: P13: FFH, lat 10 us, pow 29033 mW, 1900 MHz
acpicpu0: P14: FFH, lat 10 us, pow 27466 mW, 1800 MHz
acpicpu0: P15: FFH, lat 10 us, pow 23856 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3392481920 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata1 port 0: device present, speed: 3.0Gb/s
ahcisata1 port 3: device present, speed: 3.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off
wd0 at atabus2 drive 0
wd0: <WDC WD2500JS-08NCB1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484518 cyl, 16 head, 63 sec, 512 bytes/sect x 488395055 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus3 drive 0
wd1: <ST31000524AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata1:3:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub1 port 1: vendor 8087 product 0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 8087 product 0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 8 ports with 8 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhidev0 at uhub2 port 5 configuration 1 interface 0
uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.26/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)