Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-03-09 03:10:43
From: Luke
Description: OpenBSD/i386 soekris net5501-70
OpenBSD 5.9-current (RAMDISK_CD) #1523: Thu Mar 3 20:49:11 MST 2016 [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 500 MHz cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW real mem = 536408064 (511MB) avail mem = 518344704 (494MB) mainbus0 at root bios0 at mainbus0: date 20/70/03, BIOS32 rev. 0 @ 0xfac40 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0xa800 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) 0:20:0: io address conflict 0x6100/0x100 0:20:0: io address conflict 0x6200/0x200 pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33 "AMD Geode LX Crypto" rev 0x00 at pci0 dev 1 function 2 not configured vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address [_MAC_XXXXXXXXXX] ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, address [_MAC_XXXXXXXXXX] ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, address [_MAC_XXXXXXXXXX] ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address [_MAC_XXXXXXXXXX] ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 pcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03 pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <INTEL SSDSC2CT180A4> wd0: 16-sector PIO, LBA48, 171705MB, 351651888 sectors wd1 at pciide0 channel 0 drive 1: <SanDisk SDCFH2-008G> wd1: 4-sector PIO, LBA, 7815MB, 16007040 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd1(pciide0:0:1): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0, legacy support ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbc0: unable to establish interrupt for irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 softraid0 at root scsibus0 at softraid0: 256 targets root on rd0a swap on rd0b dump on rd0b syncing disks... done OpenBSD 5.9-current (GENERIC) #1565: Thu Mar 3 20:38:22 MST 2016 [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 500 MHz cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW real mem = 536363008 (511MB) avail mem = 513646592 (489MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 20/70/03, BIOS32 rev. 0 @ 0xfac40 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0xa800 cpu0 at mainbus0: (uniprocessor) mtrr: K6-family MTRR support (2 registers) amdmsr0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) 0:20:0: io address conflict 0x6100/0x100 0:20:0: io address conflict 0x6200/0x200 pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33 glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address [_MAC_XXXXXXXXXX] ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, address [_MAC_XXXXXXXXXX] ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, address [_MAC_XXXXXXXXXX] ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address [_MAC_XXXXXXXXXX] ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c gpio0 at glxpcib0: 32 pins iic0 at glxpcib0 pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <INTEL SSDSC2CT180A4> wd0: 16-sector PIO, LBA48, 171705MB, 351651888 sectors wd1 at pciide0 channel 0 drive 1: <SanDisk SDCFH2-008G> wd1: 4-sector PIO, LBA, 7815MB, 16007040 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 wd1(pciide0:0:1): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0, legacy support ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 isa0 at glxpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbc0: unable to establish interrupt for irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS gpio1 at nsclpcsio0: 29 pins npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (0b0e90870a23ef34.a) swap on wd0b dump on wd0b hw.sensors.nsclpcsio0.temp0=84.00 degC (Remote) hw.sensors.nsclpcsio0.temp1=127.00 degC (Remote) hw.sensors.nsclpcsio0.temp2=59.00 degC (Local) hw.sensors.nsclpcsio0.volt0=3.01 VDC hw.sensors.nsclpcsio0.volt1=1.25 VDC hw.sensors.nsclpcsio0.volt2=2.53 VDC hw.sensors.nsclpcsio0.volt3=0.59 VDC hw.sensors.nsclpcsio0.volt4=2.49 VDC hw.sensors.nsclpcsio0.volt5=2.50 VDC hw.sensors.nsclpcsio0.volt6=2.60 VDC hw.sensors.nsclpcsio0.volt7=3.31 VDC (VSB) hw.sensors.nsclpcsio0.volt8=3.33 VDC (VDD) hw.sensors.nsclpcsio0.volt9=3.01 VDC (VBAT) hw.sensors.nsclpcsio0.volt10=3.31 VDC (AVDD) hw.sensors.nsclpcsio0.volt11=1.54 VDC (TS1) hw.sensors.nsclpcsio0.volt12=1.56 VDC (TS2) hw.sensors.nsclpcsio0.volt13=1.48 VDC (TS3)