Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-04-03 12:29:56
From: ajcc
Description: NetBSD/i386 7.0 on Coppermine P3 box
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0 (GENERIC.201509250726Z)
total memory = 509 MB
avail memory = 484 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
( )
mainbus0 (root)
ACPI: RSDP 0xf71e0 000014 (v00 AWARD )
ACPI: RSDT 0x1fdf3000 000028 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x1fdf3040 000074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0x1fdf30c0 00275A (v01 AWARD AWRDACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x1fdf0000 000040
ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x0068 (20131218/psloop-219)
ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x006B (20131218/psloop-219)
ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x006C (20131218/psloop-219)
ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x0073 (20131218/psloop-219)
ACPI Warning: Unsupported module-level executable opcode 0x70 at table offset 0x0078 (20131218/psloop-219)
ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x0079 (20131218/psloop-219)
ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x007B (20131218/psloop-219)
ACPI Warning: Unsupported module-level executable opcode 0x7B at table offset 0x007C (20131218/psloop-219)
ACPI: All ACPI Tables successfully acquired
ACPI: BIOS is too old (20000131). Set acpi_force_load to use.
ACPI Error: Could not remove SCI handler (20131218/evmisc-311)
cpu0 at mainbus0: Intel 686-class, 731MHz, id 0x683
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1039 product 0x0630 (rev. 0x00)
agp0 at pchb0: aperture at 0xd9000000, size 0x400000
siside0 at pci0 dev 0 function 1
siside0: Silicon Integrated Systems 630 IDE controller (rev. 0xd0)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
pcib0 at pci0 dev 1 function 0: vendor 0x1039 product 0x0008 (rev. 0x00)
sip0 at pci0 dev 1 function 1: SiS 900 10/100 Ethernet, rev 0x80
sip0: interrupting at irq 11
sip0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at sip0 phy 1: OUI 0x00e006, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 1 function 2: vendor 0x1039 product 0x7001 (rev. 0x07)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 1 function 3: vendor 0x1039 product 0x7001 (rev. 0x07)
ohci1: interrupting at irq 9
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
autri0 at pci0 dev 1 function 4: vendor 0x1039 product 0x7018 (rev. 0x01)
autri0: interrupting at irq 5
autri0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
ppb0 at pci0 dev 2 function 0: vendor 0x1039 product 0x0001 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x1039 product 0x6300 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
puc0 at pci0 dev 14 function 0: Moxa Technologies, SmartIO C104H/PCI (com, com, com, com)
com3 at puc0 port 0: ioaddr 0xd800, interrupting at irq 5
com3: ns16550a, working fifo
com4 at puc0 port 1: ioaddr 0xd808, interrupting at irq 5
com4: ns16550a, working fifo
com5 at puc0 port 2: ioaddr 0xd810, interrupting at irq 5
com5: ns16550a, working fifo
com6 at puc0 port 3: ioaddr 0xd818, interrupting at irq 5
com6: ns16550a, working fifo
ex0 at pci0 dev 15 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74)
ex0: interrupting at irq 11
ex0: MAC address [_MAC_XXXXXXXXXX]
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0
wd0: <ASUS-PHISON SSD>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 15391 MB, 31272 cyl, 16 head, 63 sec, 512 bytes/sect x 31522176 sectors
uhub0 at usb0: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW SH-S202H, , SB00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd1 at atapibus0 drive 1: <LITE-ON LTR-48246S, , SPS1> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd1(siside0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 3 (using DMA)
wd0a: error reading fsbn 1748288 of 1748288-1748319 (wd0 bn 1748351; cn 1734 tn 7 sn 38), retrying
wd0: (aborted command, interface CRC error)
wd0: soft error (corrected)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)