Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-04-04 16:48:32
From: ajcc
Description: NetBSD/i386 7.0 on Coppermine P3, options for ACPI set to allow old BIOS
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0_STABLE (GENERIC_ACPI) #0: Mon Apr 4 11:51:37 CEST 2016
adrian@roentgen:/home/adrian/src/netbsd-7/obj/sys/arch/i386/compile/GENERIC_ACPI
total memory = 503 MB
avail memory = 478 MB
kern.module.path=/stand/i386/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
( )
mainbus0 (root)
ACPI: RSDP 0xf7510 000014 (v00 AWARD )
ACPI: RSDT 0x1f7f3000 000028 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x1f7f3040 000074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0x1f7f30c0 00356C (v01 AWARD AWRDACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x1f7f0000 000040
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0: Intel 686-class, 731MHz, id 0x683
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <AWARD ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
LNKB: ACPI: Found matching pin for 0.14.INTA at func 0: 3
LNKC: ACPI: Found matching pin for 0.15.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 0.1.INTB at func 4: 3
LNKC: ACPI: Found matching pin for 0.1.INTC at func 1: 11
LNKD: ACPI: Found matching pin for 0.1.INTD at func 2: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (FUTS, PNP0C0E): ACPI Sleep Button
MEM (PNP0C01) at acpi0 not configured
SYSR (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
mpu0 at acpi0 (MIDI, PNPB006): io 0x330-0x331 irq 10
midi1 at mpu0: Roland MPU-401 MIDI UART
joy0 at acpi0 (GAME, PNPB02F): io 0x201
joy0: joystick not connected
acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
acpitz0 at acpi0 (THRM)
acpitz0: active cooling level 0: 73.0C
acpitz0: levels: critical 75.0 C, passive 73.0 C
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 2 GPEs in block 00 to 0F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1039 product 0x0630 (rev. 0x00)
agp0 at pchb0: aperture at 0xd0000000, size 0x4000000
siside0 at pci0 dev 0 function 1
siside0: Silicon Integrated Systems 630 IDE controller (rev. 0xd0)
siside0: bus-master DMA support present
siside0: primary channel configured to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel configured to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
pcib0 at pci0 dev 1 function 0: vendor 0x1039 product 0x0008 (rev. 0x00)
sip0 at pci0 dev 1 function 1: SiS 900 10/100 Ethernet, rev 0x80
sip0: interrupting at irq 11
sip0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at sip0 phy 1: OUI 0x00e006, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0 at pci0 dev 1 function 2: vendor 0x1039 product 0x7001 (rev. 0x07)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 1 function 3: vendor 0x1039 product 0x7001 (rev. 0x07)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
autri0 at pci0 dev 1 function 4: vendor 0x1039 product 0x7018 (rev. 0x01)
autri0: interrupting at irq 3
autri0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at autri0: full duplex, playback, capture, mmap, independent
midi2 at autri0: 4DWAVE MIDI UART
ppb0 at pci0 dev 2 function 0: vendor 0x1039 product 0x0001 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x1039 product 0x6300 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
puc0 at pci0 dev 14 function 0: Moxa Technologies, SmartIO C104H/PCI (com, com, com, com)
com3 at puc0 port 0: ioaddr 0xe400, interrupting at irq 3
com3: ns16550a, working fifo
com4 at puc0 port 1: ioaddr 0xe408, interrupting at irq 3
com4: ns16550a, working fifo
com5 at puc0 port 2: ioaddr 0xe410, interrupting at irq 3
com5: ns16550a, working fifo
com6 at puc0 port 3: ioaddr 0xe418, interrupting at irq 3
com6: ns16550a, working fifo
ex0 at pci0 dev 15 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74)
ex0: interrupting at irq 11
ex0: MAC address [_MAC_XXXXXXXXXX]
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 6
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0
wd0: <ASUS-PHISON SSD>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 15391 MB, 31272 cyl, 16 head, 63 sec, 512 bytes/sect x 31522176 sectors
uhub0 at usb0: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW SH-S202H, , SB00> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd1 at atapibus0 drive 1: <LITE-ON LTR-48246S, , SPS1> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
cd1(siside0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)