Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2016-04-24 09:28:05
From: youri
Description: NetBSD 7.99.26 amd64 Hewlett-Packard HP Compaq 6000 Pro MT PC (KMS G4X)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.26 (GENERIC) #0: Mon Feb 22 18:15:35 CET 2016
[_EMAIL_XXXXXXX].p4:/home/youri/cvs/src/sys/arch/amd64/compile/obj/GENERIC
total memory = 3991 MB
avail memory = 3854 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Compaq 6000 Pro MT PC ( )
mainbus0 (root)
ACPI: RSDP 0x00000000000E5810 000014 (v00 COMPAQ)
ACPI: RSDT 0x00000000DD7C5840 000040 (v01 HPQOEM SLIC-BPC 20090825 00000000)
ACPI: FACP 0x00000000DD7C58E8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20160108/tbfadt-681)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20160108/tbfadt-733)
ACPI: DSDT 0x00000000DD7C5C5F 009F6C (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 0x00000000DD7C5800 000040
ACPI: APIC 0x00000000DD7C595C 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: ASF! 0x00000000DD7C59E0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: MCFG 0x00000000DD7C5A43 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: TCPA 0x00000000DD7C5A7F 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: SLIC 0x00000000DD7C5AB1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: HPET 0x00000000DD7C5C27 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, id 0x1067a
cpu1 at mainbus0 apid 1
cpu1: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, id 0x1067a
acpi0 at mainbus0: Intel ACPICA 20160108
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,20090825>, AslId < ,00000000>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f4000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8107190C10 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE810715C990 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
COM1 (PNP0501) at acpi0 not configured
APIC (PNP0003) at acpi0 not configured
TPM (IFX0102) at acpi0 not configured
SBD1 (PNP0C02) at acpi0 not configured
SBD3 (PNP0C02) at acpi0 not configured
SBD2 (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
MBRD (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
ACPI: Enabled 1 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2e10 (rev. 0x03)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2e12 (rev. 0x03)
drm: Memory usable by graphics device = 512M
drm kern info: [drm] ACPI BIOS requests an excessive sleep of 4294967295 ms, using 1500 ms instead
drm kern info: [drm] ACPI BIOS requests an excessive sleep of 4294967295 ms, using 1500 ms instead
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800046e2f000, size 2560x1440, depth 32, stride 10240
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 2e13 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
vendor 8086 product 2e14 (miscellaneous communications, revision 0x03) at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2: vendor 8086 product 2e16 (rev. 0x03)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
puc0 at pci0 dev 3 function 3: Intel Q45 KT (com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0x1248, interrupting at ioapic0 pin 17
com2: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: 82567LM-3 LAN Controller (rev. 0x02)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 8086 product 3a67 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 3a68 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 3a69 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 3a6c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 21
hdafg0 at hdaudio0: vendor 10ec product 0662
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: Speaker [Built-In]
hdafg0: DAC02 2ch: HP Out [Jack]
hdafg0: ADC03 2ch: Line In [Jack]
hdafg0: ADC04 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 8086 product 3a70 (rev. 0x02)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 32
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 3a72 (rev. 0x02)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 48
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 8086 product 3a64 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 3a65 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 3a66 (rev. 0x02)
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 3a6a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0xa2)
pci3 at ppb2 bus 16
pci3: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3a1a (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3a02 (rev. 0x02)
ahcisata0: interrupting at ioapic0 pin 18
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xe720ff05<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
atabus5 at ahcisata0 channel 3
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 17 us, pow 500 mW
acpicpu0: C3: FFH, lat 50 us, pow 100 mW
acpicpu0: P0: FFH, lat 10 us, pow 135000 mW, 2600 MHz
acpicpu0: P1: FFH, lat 10 us, pow 82225 mW, 1800 MHz
acpicpu0: P2: FFH, lat 10 us, pow 52624 mW, 1200 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 3: PHY offline
ahcisata0 port 2: PHY offline
wd0 at atabus2 drive 0
wd0: <ST3320418AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus3: 1 targets
cd0 at atapibus0 drive 0: <hp DDVDW TS-H653R, R3786GCS98764100, 0E00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub8 at uhub3 port 2: vendor 0424 product 2514, class 9/0, rev 2.00/b.b3, addr 2
uhub8: multiple transaction translators
uhub8: 3 ports with 2 removable, self powered
umass0 at uhub7 port 2 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/81.97, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 5 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Compact Flash, 1.00> disk removable
sd0: drive offline
sd1 at scsibus0 target 0 lun 1: <Generic-, SM/xD-Picture, 1.00> disk removable
sd1: drive offline
sd2 at scsibus0 target 0 lun 2: <Generic-, SD/MMC, 1.00> disk removable
sd2: drive offline
sd3 at scsibus0 target 0 lun 3: <Generic-, MS/MS-Pro/HG, 1.00> disk removable
sd3: drive offline
sd4 at scsibus0 target 0 lun 4: <Generic-, SD/MMC/MS/MSPRO, 1.00> disk removable
sd4: drive offline
uhub9 at uhub8 port 1: vendor 0424 product 2640, class 9/0, rev 2.00/0.00, addr 3
uhub9: single transaction translator
uhub9: 3 ports with 2 removable, self powered
umass1 at uhub9 port 1 configuration 1 interface 0
umass1: Generic Ultra Fast Media Reader, rev 2.00/1.91, addr 4
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd5 at scsibus1 target 0 lun 0: <Generic, Ultra HS-SD/MMC, 1.91> disk removable
sd5: drive offline
uhidev0 at uhub9 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 2.00/12.01, addr 5, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub9 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 2.00/12.01, addr 5, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub9 port 2 configuration 1 interface 2
uhidev2: Logitech USB Receiver, rev 2.00/12.01, addr 5, iclass 3/0
uhidev2: 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
uhub10 at uhub8 port 2: vendor 0409 product 005a, class 9/0, rev 2.00/1.00, addr 6
uhub10: single transaction translator
uhub10: 3 ports with 2 removable, self powered
uhidev3 at uhub10 port 1 configuration 1 interface 0
uhidev3: Topre Corporation HHKB Professional, rev 1.10/1.02, addr 7, iclass 3/1
ukbd1 at uhidev3: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub8 port 3 configuration 1 interface 0
uhidev4: Clearly Superior Technologies. CST Laser Trackball, rev 2.00/11.00, addr 8, iclass 3/1
ums1 at uhidev4: 5 buttons and Z dir
wsmouse1 at ums1 mux 0
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.26/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)