Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-04-25 14:02:45
From: devjr
Description: HP ProLiant DL320e Gen8 v2
OpenBSD 5.7 (GENERIC.MP) #4: Wed Oct 14 19:46:39 CEST 2015
[_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/binpatchng/work-binpatch57-amd64/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4108201984 (3917MB)
avail mem = 3994918912 (3809MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xb7fcb000 (82 entries)
bios0: vendor HP version "P80" date 04/02/2015
bios0: HP ProLiant DL320e Gen8 v2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC FFFF BERT HEST DMAR FFFF SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PCI0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xb8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz, 3592.15 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz, 3591.69 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz, 3591.69 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz, 3591.69 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpiprt0 at acpi0: bus 10 (IPT1)
acpiprt1 at acpi0: bus -1 (IPT2)
acpiprt2 at acpi0: bus -1 (IPT3)
acpiprt3 at acpi0: bus -1 (IPT4)
acpiprt4 at acpi0: bus -1 (IPT5)
acpiprt5 at acpi0: bus 3 (IPT6)
acpiprt6 at acpi0: bus -1 (IPT7)
acpiprt7 at acpi0: bus 1 (IPT8)
acpiprt8 at acpi0: bus 4 (PT02)
acpiprt9 at acpi0: bus 7 (PT03)
acpiprt10 at acpi0: bus 2 (PT04)
acpiprt11 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C2, C1
acpicpu1 at acpi0: C2, C1
acpicpu2 at acpi0: C2, C1
acpitz0 at acpi0: critical temperature is 31 degC
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi
pci1 at ppb0 bus 4
ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: apic 8 int 16
ciss0: 1 LD, HW rev 1, FW 6.64/6.64, 64bit fifo rro
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 6.64> SCSI3 0/direct fixed
sd0: 139979MB, 512 bytes/sector, 286677120 sectors
ppb1 at pci0 dev 1 function 1 "Intel Core 4G PCIE" rev 0x06: msi
pci2 at ppb1 bus 7
bge0 at pci2 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI[_IP_XX]: msi, address [_MAC_XXXXXXXXXX]
brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI[_IP_XX]: msi, address [_MAC_XXXXXXXXXX]
brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 1 function 2 "Intel Core 4G PCIE" rev 0x06: msi
pci3 at ppb2 bus 2
unknown vendor 0x1590 product 0x005f (class memory subclass miscellaneous, rev 0x00) at pci3 dev 0 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 21
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4
pci4 at ppb3 bus 10
ppb4 at pci0 dev 28 function 5 "Intel 8 Series PCIE" rev 0xd4
pci5 at ppb4 bus 3
bge2 at pci5 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI[_IP_XX]: msi, address [_MAC_XXXXXXXXXX]
brgphy2 at bge2 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
bge3 at pci5 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI[_IP_XX]: msi, address [_MAC_XXXXXXXXXX]
brgphy3 at bge3 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 28 function 7 "Intel 8 Series PCIE" rev 0xd4
pci6 at ppb5 bus 1
"Hewlett-Packard iLO3 Slave" rev 0x05 at pci6 dev 0 function 0 not configured
vga1 at pci6 dev 0 function 1 "Matrox MGA G200eH" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Hewlett-Packard iLO3 Management" rev 0x05 at pci6 dev 0 function 2 not configured
uhci0 at pci6 dev 0 function 4 "Hewlett-Packard USB" rev 0x02: apic 8 int 16
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 20
usb3 at ehci1: USB revision 2.0
uhub3 at usb3 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel C222 LPC" rev 0x04
"Intel 8 Series RAID" rev 0x04 at pci0 dev 31 function 2 not configured
isa0 at pcib0
isadma0 at isa0
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub4 at uhub0 port 3 "Standard Microsystems product 0x2660" rev 2.00/8.01 addr 2
uhub5 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
uhub6 at uhub3 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (c45f0f4bb8d6767b.a) swap on sd0b dump on sd0b