Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-05-29 15:25:59
From: nbyouri
Description: NetBSD 7.99.29 (current) amd64 Hewlett-Packard HP Pavilion dm1 Notebook PC
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.29 (GENERIC) #2: Fri May 27 00:02:14 CEST 2016
youri@:/home/youri/src/sys/arch/amd64/compile/obj/GENERIC
total memory = 2665 MB
avail memory = 2567 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Pavilion dm1 Notebook PC (0589100000252B00000320100)
mainbus0 (root)
ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000A6EF5120 000064 (v01 HPQOEM SLIC-MPC 00000003 01000013)
ACPI: FACP 0x00000000A6EF4000 0000F4 (v04 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
ACPI: DSDT 0x00000000A6EE7000 00972F (v01 HP INSYDE F0000000 ACPI 00040000)
ACPI: FACS 0x00000000A6C96000 000040
ACPI: FACS 0x00000000A6C96000 000040
ACPI: HPET 0x00000000A6EF3000 000038 (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: APIC 0x00000000A6EF2000 000084 (v02 HP INSYDE 00000001 ACPI 00040000)
ACPI: MCFG 0x00000000A6EF1000 00003C (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: BOOT 0x00000000A6EE6000 000028 (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: SLIC 0x00000000A6EE5000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000A6EE4000 0003DE (v01 HP INSYDE 00000001 AMD 00000001)
ACPI: SSDT 0x00000000A6EE2000 0012FA (v02 HP INSYDE 00000001 MSFT 04000000)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 3 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0
cpu0: AMD E-350 Processor, id 0x500f10
cpu0: SVM disabled by the BIOS
cpu1 at mainbus0 apid 1
cpu1: AMD E-350 Processor, id 0x500f10
acpi0 at mainbus0: Intel ACPICA 20160422
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000003>, AslId < ,01000013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-1)
: io 0x62,0x66
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEMR (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: [0,10,20,30,40,50,60,70,80,90,100]
acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (HDMI, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0: 0x0210 (acpiout2): Unknown Output Device, head 0, bios detect
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1E3B) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: Hewlett-Packard Li rechargeable battery
acpibat0: granularity: low->warn 0.548 Wh, warn->full 0.548 Wh
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
ACEL (HPQ0004) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THRM): cpu0
acpitz0: levels: critical 98.0 C, hot 94.0 C, passive 91.0 C, passive cooling
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.4
pms0: Extended W mode, Palm detect, One button click pad, Multi-finger Report
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 1022 product 1510 (rev. 0x00)
radeon0 at pci0 dev 1 function 0: vendor 1002 product 9802 (rev. 0x00)
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: vendor 1002 product aa01
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
ppb0 at pci0 dev 4 function 0: vendor 1022 product 1512 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci1 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at msi0 vec 0
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 4
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 5 function 0: vendor 1022 product 1513 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ral0 at pci2 dev 0 function 0: vendor 1814 product 539f (rev. 0x00)
ral0: interrupting at ioapic0 pin 17
ral0: 802.11 address [_MAC_XXXXXXXXXX]
ral0: MAC/BBP RT5390 (rev 0x0502), RF unknown (MIMO 1T1R)
ahcisata0 at pci0 dev 17 function 0: vendor 1002 product 4391 (rev. 0x40)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 1 port, 32 slots, CAP 0xf732ff00<PSC,SSC,PMD,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
ohci0 at pci0 dev 18 function 0: vendor 1002 product 4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 1002 product 4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 1002 product 4385 (rev. 0x42)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
iic1 at piixpm0: I2C bus
iic2 at piixpm0: I2C bus
iic3 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: vendor 111d product 7605
hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg1: ADC01 2ch: Mic In [Jack]
hdafg1: ADC02 2ch: Mic In [Jack & Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
pcib0 at pci0 dev 20 function 3: vendor 1002 product 439d (rev. 0x40)
ppb2 at pci0 dev 20 function 4: vendor 1002 product 4384 (rev. 0x40)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ohci2 at pci0 dev 22 function 0: vendor 1002 product 4397 (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb4 at ohci2: USB revision 1.0
ehci2 at pci0 dev 22 function 2: vendor 1002 product 4396 (rev. 0x00)
ehci2: interrupting at ioapic0 pin 17
ehci2: dropped intr workaround enabled
ehci2: BIOS has given up ownership
ehci2: EHCI version 1.0
ehci2: companion controller, 4 ports each: ohci2
usb5 at ehci2: USB revision 2.0
pchb1 at pci0 dev 24 function 0: vendor 1022 product 1700 (rev. 0x43)
pchb2 at pci0 dev 24 function 1: vendor 1022 product 1701 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 1022 product 1702 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family14h)
pchb4 at pci0 dev 24 function 4: vendor 1022 product 1704 (rev. 0x00)
pchb5 at pci0 dev 24 function 5: vendor 1022 product 1718 (rev. 0x00)
pchb6 at pci0 dev 24 function 6: vendor 1022 product 1716 (rev. 0x00)
pchb7 at pci0 dev 24 function 7: vendor 1022 product 1719 (rev. 0x00)
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: C2: I/O, lat 100 us, pow 0 mW
acpicpu0: P0: FFH, lat 1 us, pow 4940 mW, 1600 MHz
acpicpu0: P1: FFH, lat 1 us, pow 3217 mW, 1280 MHz
acpicpu0: P2: FFH, lat 1 us, pow 1382 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1596102240 Hz quality 3000
acpiacad0: AC adapter offline.
uhub0 at usb0: vendor 1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb1: vendor 1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb2: vendor 1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: vendor 1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uhub4 at usb4: vendor 1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 4 ports with 4 removable, self powered
uhub5 at usb5: vendor 1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <Hitachi HTS725050A9A364>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub6 at uhub1 port 2: vendor 0409 product 005a, class 9/0, rev 2.00/1.00, addr 2
uhub6: single transaction translator
uhub6: 3 ports with 2 removable, self powered
uvideo0 at uhub3 port 1 configuration 1 interface 0: Chicony Electronics Co., Ltd. CNFA033, rev 2.00/90.70, addr 2
video0 at uvideo0: Chicony Electronics Co., Ltd. CNFA033, rev 2.00/90.70, addr 2
uhidev0 at uhub6 port 1 configuration 1 interface 0
uhidev0: Topre Corporation HHKB Professional, rev 1.10/1.02, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
ehci0: handing over full speed device on port 3 to ohci0
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/38.82, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.29/modules
drm: initializing kernel modesetting (PALM 0x1002:0x9802 0x103C:0x1611).
drm: register mmio base: 0xd0200000
drm: register mmio size: 262144
drm kern info: ATOM BIOS: HP
radeon0: info: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
radeon0: info: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
drm: Detected VRAM RAM=180M, BAR=256M
drm: RAM width 32bits DDR
Zone kernel: Available graphics memory: 921284 kiB
drm: radeon: 384M of VRAM memory ready
drm: radeon: 1024M of GTT memory ready.
drm: Loading PALM Microcode
ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
drm: Internal thermal controller without fan control
drm: Found smc ucode version: 0x00010200
drm: radeon: dpm initialized
drm: GART: num cpu pages 262144, num gpu pages 262144
drm: PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon0: info: WB enabled
radeon0: info: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x0xffff8000301afc00
radeon0: info: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x0xffff8000301afc0c
radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xffff8000301f2118
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
radeon0: interrupting at ioapic0 pin 18 (radeon)
drm: radeon: irq initialized.
drm: ring test on 0 succeeded in 1 usecs
drm: ring test on 3 succeeded in 1 usecs
drm: ring test on 5 succeeded in 1 usecs
drm: UVD initialized successfully.
drm: ib test on ring 0 succeeded in 0 usecs
drm: ib test on ring 3 succeeded in 0 usecs
drm: ib test on ring 5 succeeded
drm: Radeon Display Connectors
drm: Connector 0:
drm: LVDS-1
drm: HPD1
drm: DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
drm: Encoders:
drm: LCD1: INTERNAL_UNIPHY
drm: Connector 1:
drm: HDMI-A-1
drm: HPD2
drm: DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
drm: Encoders:
drm: DFP1: INTERNAL_UNIPHY
drm: Connector 2:
drm: VGA-1
drm: DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
drm: Encoders:
drm: CRT1: INTERNAL_KLDSCP_DAC1
radeondrmkmsfb0 at radeon0
radeon0: info: registered panic notifier
radeondrmkmsfb0: framebuffer at 0xffff800030817000, size 1366x768, depth 32, stride 5632
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 3 configuration 1 interface 0
uhidev1: Clearly Superior Technologies. CST Laser Trackball, rev 2.00/11.00, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir
wsmouse1 at ums0 mux 0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
set{u,g}id pid 748 (gnome-pty-helper) was invoked by uid 1000 ppid 331 (mate-terminal) with fd 2 closed
set{u,g}id pid 1523 (gnome-pty-helper) was invoked by uid 1000 ppid 1362 (mate-terminal) with fd 2 closed
ehci2: handing over full speed device on port 1 to ohci2
ubt0 at uhub4 port 1
ubt0: Ralink Technology CSR BS8510, rev 2.00/68.17, addr 2