Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2016-06-10 13:05:37
From: chmeee
Description: PowerBook G4 1.67GHz
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-ALPHA1 #0 r300895: Sat May 28 21:49:28 CDT 2016
    root@:/usr/obj/usr/src/sys/GENERIC-NODEBUG powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
VT(ofwfb): resolution 1440x960
cpu0: Motorola PowerPC 7447A revision 1.5, 833.65 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
real memory  = 1587900416 (1514 MB)
avail memory = 1530863616 (1459 MB)
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
dfs0: <Dynamic Frequency Switching> on cpu0
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 5856, bank1 generation 5855
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 217
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
iicbus0: <OFW I2C bus> on iichb0
adt746x0: <Apple Thermostat Unit ADT746X> at addr 0x5c on iicbus0
ds17750: <Temp-Monitor DS1775> at addr 0x92 on iicbus0
pcib0: <Apple UniNorth Host-PCI bridge> mem 0xf0000000-0xf1ffffff irq 45 on ofwbus0
pci0: <OFW PCI bus> on pcib0
agp0: <Apple Intrepid AGP Bridge> on hostb0
vgapci0: <VGA-compatible display> port 0x400-0x4ff mem 0xb8000000-0xbfffffff,0xb0000000-0xb000ffff irq 48 at device 16.0 on pci0
backlight0: <PowerBook backlight for ATI graphics> on vgapci0
vgapci0: Boot video device
pcib1: <Apple UniNorth Host-PCI bridge> mem 0xf2000000-0xf3ffffff irq 45 on ofwbus0
pci1: <OFW PCI bus> on pcib1
macio0: <Intrepid I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
vcoregpio0: <CPU Core Voltage Control> gpio 1 on macgpio0
pmuextint0: <Apple PMU99 External Interrupt> extint-gpio 1 irq 47 on macgpio0
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2,31,3,4 on macio0
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iicbus1: <OFW I2C bus> on iichb1
onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1
iicbus1: <unknown card> at addr 0x20
pci1: <network> at device 17.0 (no driver attached)
pci1: <bridge, PCI-CardBus> at device 20.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xa0002000-0xa0002fff irq 54 at device 21.0 on pci1
usbus0 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0xa0001000-0xa0001fff irq 54 at device 21.1 on pci1
usbus1 on ohci1
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xa0000000-0xa00000ff irq 54 at device 21.2 on pci1
usbus2: EHCI version 1.0
usbus2 on ehci0
pcib2: <Apple UniNorth Host-PCI bridge> mem 0xf4000000-0xf5ffffff irq 45 on ofwbus0
pci2: <OFW PCI bus> on pcib2
ata0: <Intrepid-2 Kauai ATA Controller> mem 0xf5004000-0xf5007fff irq 39 at device 13.0 on pci2
fwohci0: <1394 Open Host Controller Interface> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:72:9a
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: xx:xx:xx:xx:xx:xx
fwe0: Ethernet address: xx:xx:xx:xx:xx:xx
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
gem0: <Apple Intrepid 2 GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
miibus0: <MII bus> on gem0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: xx:xx:xx:xx:xx:xx
cryptosoft0: <software crypto> on nexus0
Timecounter "timebase" frequency 8320000 Hz quality 0
Event timer "decrementer" frequency 8320000 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <NEC> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
adt746x0: Dev ID 0x68, Company ID 0x41, Rev ID 0x71 CNF: 0x5
adt746x0: 2 fans detected!
uhub0: 3 ports with 3 removable, self powered
uhub1: 2 ports with 2 removable, self powered
adt746x0: 6 sensors detected!
uhub2: 5 ports with 5 removable, self powered
ugen0.2: <vendor 0x05ac> at usbus0
ukbd0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0
ada0 acd0 at ata0 bus 0 scbus0 target 1 lun 0kbd1 at ukbd0

cd0: <MATSHITA DVD-R   UJ-846 FAAG> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)ugen1.2: <Apple Computer> at usbus1

cd0: 612MB (313711 2048 byte sectors)
t ata0 bus 0 scbus0 target 0 lun 0ukbd1: <Keyboard> on usbus1
ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0
kbd2 at ukbd1
ums0: 5 buttons and [XY] coordinates ID=0

ada0: <ST910021A 3.04> ATA-7 device
ada0: Serial Number xxxxxxxx: <Touchpad> on usbus1
uhid0: <Keyboard> on usbus1

ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 95396MB (195371568 512 byte sectors)
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
Trying to mount root from ufs:/dev/ada0s3 [rw]...
random: unblocking device.
gem0: link state changed to DOWN