Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2016-06-28 08:08:00
From: ajcc
Description: NetBSD/amd64 7.99.29 on ASUS EeePC 1005 PE
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.29 (GENERIC.201605140950Z)
total memory = 1014 MB
avail memory = 964 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
ASUSTeK Computer INC. 1005PE (x.x)
mainbus0 (root)
ACPI: RSDP 0x00000000000FBF40 000024 (v02 ACPIAM)
ACPI: XSDT 0x000000003F690100 00006C (v01 _ASUS_ Notebook 01001004 MSFT 00000097)
ACPI: FACP 0x000000003F690290 0000F4 (v04 A_M_I_ OEMFACP  01001004 MSFT 00000097)
ACPI: DSDT 0x000000003F690490 008C50 (v02 A1414  A1414000 00000000 INTL 20060113)
ACPI: FACS 0x000000003F69E000 000040
ACPI: FACS 0x000000003F69E000 000040
ACPI: APIC 0x000000003F690390 00005C (v02 A_M_I_ OEMAPIC  01001004 MSFT 00000097)
ACPI: MCFG 0x000000003F6903F0 00003C (v01 A_M_I_ OEMMCFG  01001004 MSFT 00000097)
ACPI: ECDT 0x000000003F690430 000055 (v01 A_M_I_ OEMECDT  01001004 MSFT 00000097)
ACPI: OEMB 0x000000003F69E040 000061 (v01 A_M_I_ AMI_OEM  01001004 MSFT 00000097)
ACPI: HPET 0x000000003F6990E0 000038 (v01 A_M_I_ OEMHPET  01001004 MSFT 00000097)
ACPI: GSCI 0x000000003F69E0B0 002024 (v01 A_M_I_ GMCHSCI  01001004 MSFT 00000097)
ACPI: SSDT 0x000000003F6A0C80 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20060113)
ACPI: SLIC 0x000000003F699120 000176 (v01 _ASUS_ Notebook 01001004 MSFT 00000097)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 2 ACPI AML tables successfully acquired and loaded

ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz, id 0x106ca
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Atom(TM) CPU N450   @ 1.66GHz, id 0x106ca
acpi0 at mainbus0: Intel ACPICA 20160422
acpi0: X/RSDT: OemId <_ASUS_,Notebook,01001004>, AslId <MSFT,00000097>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8003235810 000326 (v01 PmRef  Cpu0Ist  00003000 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE803F17F010 000724 (v01 PmRef  Cpu0Cst  00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE803F5A6D10 0000AB (v01 PmRef  Cpu1Ist  00003000 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE80032837C8 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20060113)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): using acpiecdt0
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0A13) (aux port): irq 12
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: ASUS LION rechargeable battery
acpibat0: granularity: low->warn 0.058 Ah, warn->full 0.058 Ah
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (CRTD, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (TVOD, 0x0200): ACPI Display Output Device
acpiout2 at acpivga0 (LCDD, 0x0400): ACPI Display Output Device
acpiout2: brightness levels: [1,5,8,10,13,16,20,22,25,27,29-30,32-33,35-36]
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0200 (acpiout1): TV, head 0, bios detect
acpivga0:   0x0400 (acpiout2): Unknown Output Device, head 0, bios detect
RMEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpitz0 at acpi0 (TZ00): cpu0 cpu1
acpitz0: levels: critical 98.0 C, passive 95.0 C, passive cooling
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
ACPI: Enabled 2 GPEs in block 00 to 1F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Extended W mode, Palm detect, Multi-finger Report
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product a010 (rev. 0x00)
agp0 at pchb0: Pineview chipset
agp0: detected 7164k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product a011 (rev. 0x00)
drm: Memory usable by graphics device = 1024M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: initialized overlay support
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800012e69000, size 1024x600, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product a012 (miscellaneous display) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: vendor 10ec product 0269
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Built-In]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb0 at pci0 dev 28 function 0: vendor 8086 product 27d0 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 4
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 27d2 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
athn0 at pci2 dev 0 function 0: Atheros AR9285
athn0: rev 2 (1T1R), ROM rev 13, address xx:xx:xx:xx:xx:xx
athn0: interrupting at ioapic0 pin 17
athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 8086 product 27d6 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 1
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
alc0 at pci3 dev 0 function 0: Atheros AR8132 PCIe Fast Ethernet
alc0: interrupting at ioapic0 pin 19
alc0: Ethernet address xx:xx:xx:xx:xx:xx
atphy0 at alc0 phy 0: L1 10/100/1000 PHY, rev. 11
atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 8086 product 27c8 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 27c9 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 27ca (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: vendor 8086 product 27cb (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 27cc (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xe2)
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 27bc (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 27c1 (rev. 0x02)
ahcisata0: interrupting at ioapic0 pin 21
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xc720ff03<PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 27da (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 21
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat   1 us, pow   500 mW
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 1667 MHz
acpicpu0: P1: FFH, lat  10 us, pow 25000 mW, 1333 MHz
acpicpu0: P2: FFH, lat  10 us, pow 16000 mW, 1000 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <SanDisk SDSA5GK-016G-1006>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 15272 MB, 31029 cyl, 16 head, 63 sec, 512 bytes/sect x 31277232 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uvideo0 at uhub4 port 6 configuration 1 interface 0: Image Processor USB2.0 UVC VGA WebCam, rev 2.00/9.17, addr 2
video0 at uvideo0: Image Processor USB2.0 UVC VGA WebCam, rev 2.00/9.17, addr 2
ehci0: handing over full speed device on port 7 to uhci3
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.29/modules
ubt0 at uhub3 port 1
ubt0: Broadcom Corp BT-270, rev 2.00/2.54, addr 2
acpibat0: normal capacity on 'charge state'
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)