Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-07-07 16:04:55
From: ml
Description: NetBSD/amd64 7.0.1 - Laptop Toshiba Satellite L40-18L
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0.1 (GENERIC.201605221355Z)
total memory = 3063 MB
avail memory = 2956 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
TOSHIBA T20 (PSL40U-xxxxxx)
mainbus0 (root)
ACPI: RSDP 0xf8840 000024 (v02 ACPIAM)
ACPI: XSDT 0xbf7a0100 000084 (v01 TOSASU TOSASU00 05000814 MSFT 00000097)
ACPI: FACP 0xbf7a0290 0000F4 (v03 TOSASU T0SASU00 05000814 MSFT 00000097)
ACPI: DSDT 0xbf7a0680 00C1A0 (v01 TOSASU TOSASU00 00000000 INTL 20051117)
ACPI: FACS 0xbf7ae000 000040
ACPI: APIC 0xbf7a0390 00005C (v01 TOSASU T0SASU00 05000814 MSFT 00000097)
ACPI: MCFG 0xbf7a0430 00003C (v01 TOSASU T0SASU00 05000814 MSFT 00000097)
ACPI: SLIC 0xbf7a0470 000176 (v01 TOSASU TOSASU00 05000814 MSFT 00000097)
ACPI: DBGP 0xbf7a03f0 000034 (v01 TOSASU T0SASU00 05000814 MSFT 00000097)
ACPI: BOOT 0xbf7a05f0 000028 (v01 TOSASU T0SASU00 05000814 MSFT 00000097)
ACPI: ECDT 0xbf7a0620 000054 (v01 TOSASU T0SASU00 05000814 MSFT 00000097)
ACPI: OEMB 0xbf7ae040 000060 (v01 TOSASU T0SASU00 05000814 MSFT 00000097)
ACPI: HPET 0xbf7ac820 000038 (v01 TOSASU TOSASU00 05000814 MSFT 00000097)
ACPI: GSCI 0xbf7ae0a0 002024 (v01 TOSASU GMCHSCI 05000814 MSFT 00000097)
ACPI: ATKG 0xbf7b02d0 008024 (v01 A_M_I_ OEMATKG 00000000 00000000)
ACPI: SSDT 0xbf7b8cc0 0004E6 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, id 0x6fd
cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, id 0x6fd
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <TOSASU,TOSASU00,05000814>, AslId <MSFT,00000097>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x95, should be 0x4A (20131218/tbprint-237)
ACPI: SSDT 0xbf7b83d0 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x0 000244 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0xbf7b86b0 00060F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x0 00060F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0xbf7b8300 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 0x0 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 0xbf7b8620 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): using acpiecdt0
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN0A0E) (aux port): irq 12
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (DVID, 0x0300): ACPI Display Output Device
acpiout1 at acpivga0 (CRTD, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (LCDD, 0x0400): ACPI Display Output Device
acpiout2: brightness levels: 30 40 50 60 70 80 90 100
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): VGA Analog Monitor, index 0, port 0, head 0, bios detect
acpivga0: 0x0400 (acpiout2): Int. Digital Flat Panel, index 0, port 0, head 0, bios detect
acpivga0: 0x0300 (acpiout0): Ext. Digital Monitor, index 0, port 0, head 0, bios detect
acpiacad0 at acpi0 (AC0, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: TOSASU LIon rechargeable battery
acpibat0: granularity: low->warn 0.440 Wh, warn->full 0.440 Wh
RMEM (PNP0C01) at acpi0 not configured
ATKD (ATK0100) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpitz0 at acpi0 (THRM): cpu0 cpu1
acpitz0: levels: critical 127.0 C, passive 127.0 C, passive cooling
ACPI: Enabled 6 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.3
pms0: Up/down buttons, Palm detect, Two button click pad, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a00 (rev. 0x03)
agp0 at pchb0: i965-family chipset
agp0: detected 7676k stolen memory
agp0: aperture at 0xd0000000, size 0x20000000
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x03)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: initialized overlay support
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff8000368c9000, size 1280x800, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 18
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Realtek ALC660-VD
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 23
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled
rtk0 at pci4 dev 7 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 16
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2815 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829 (rev. 0x03)
ahcisata0: interrupting at ioapic0 pin 20
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 0xe720ffc2<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 1
atabus3 at ahcisata0 channel 2
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 17 us, pow 250 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 1600 MHz
acpicpu0: P1: FFH, lat 10 us, pow 28000 mW, 1333 MHz
acpicpu0: P2: FFH, lat 10 us, pow 22000 mW, 1067 MHz
acpicpu0: P3: FFH, lat 10 us, pow 16000 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
atapibus0 at atabus0: 2 targets
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-T20N, M007CTG1050, WK03> cdrom removable
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
uhub6 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus1 drive 0
wd0: <ST9160821AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
urtw0 at uhub5 port 2: RTL8187B rev E, address [_MAC_XXXXXXXXXX]
urtw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
urtw0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)