Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2016-07-07 16:09:40
From: ml
Description: NetBSD/amd64 7.0.1 - with Asus P8H61-M LE R2.0 - works perfectly
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0.1 (GENERIC.201605221355Z)
total memory = 8066 MB
avail memory = 7814 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0xf0490 000024 (v02 ALASKA)
ACPI: XSDT 0xc8a08078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0xc8a127c0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0xc8a08170 00A64A (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 0xc8b31080 000040
ACPI: APIC 0xc8a128d0 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0xc8a12938 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0xc8a12980 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0xc8a129c0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0xc8a129f8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0xc8a13728 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 0xc8a12dc0 000968 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) CPU G860 @ 3.00GHz, id 0x206a7
cpu1 at mainbus0 apid 2: Intel(R) Pentium(R) CPU G860 @ 3.00GHz, id 0x206a7
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId <AMI ,00010013>
ACPI: SSDT 0xc89b2018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x0 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0xc89b3a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0xc89b4c18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)
acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 82.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 103.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1
acpitz1: levels: critical 103.0 C, passive 103.0 C, passive cooling
acpiwmi0 at acpi0 (AMW0, PNP0C14-ASUSWMI): ACPI WMI Interface
wmieeepc0 at acpiwmi0: Asus Eee PC WMI mappings
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0100 (rev. 0x09)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0101 (rev. 0x09)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
radeon0 at pci1 dev 0 function 0: vendor 0x1002 product 0x954f (rev. 0x00)
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0102 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: Wrong MCH_SSKPD value: 0x16040307
drm: This can cause pipe underruns and display issues.
drm: Please upgrade your BIOS to fix this.
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff80008dcf4000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
vendor 0x8086 product 0x1c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1c2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 23
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg1 at hdaudio1: Realtek ALC887
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Built-In]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, mmap, independent
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x1c10 (rev. 0xb5)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x1c14 (rev. 0xb5)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x09)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 5
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x244e (rev. 0xb5)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci4 dev 0 function 0: vendor 0x1b21 product 0x1080 (rev. 0x01)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1c26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1c5c (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1c02 (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xc320ff43<EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SNCQ,S64A>
atabus0 at ahcisata0 channel 4
atabus1 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x1c22 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 80 us, pow 500 mW
acpicpu0: C3: FFH, lat 104 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 65000 mW, 3000 MHz
acpicpu0: P1: FFH, lat 10 us, pow 61690 mW, 2900 MHz
acpicpu0: P2: FFH, lat 10 us, pow 59079 mW, 2800 MHz
acpicpu0: P3: FFH, lat 10 us, pow 56516 mW, 2700 MHz
acpicpu0: P4: FFH, lat 10 us, pow 53380 mW, 2600 MHz
acpicpu0: P5: FFH, lat 10 us, pow 50918 mW, 2500 MHz
acpicpu0: P6: FFH, lat 10 us, pow 48514 mW, 2400 MHz
acpicpu0: P7: FFH, lat 10 us, pow 45546 mW, 2300 MHz
acpicpu0: P8: FFH, lat 10 us, pow 43230 mW, 2200 MHz
acpicpu0: P9: FFH, lat 10 us, pow 40960 mW, 2100 MHz
acpicpu0: P10: FFH, lat 10 us, pow 38156 mW, 2000 MHz
acpicpu0: P11: FFH, lat 10 us, pow 35991 mW, 1900 MHz
acpicpu0: P12: FFH, lat 10 us, pow 33861 mW, 1800 MHz
acpicpu0: P13: FFH, lat 10 us, pow 31218 mW, 1700 MHz
acpicpu0: P14: FFH, lat 10 us, pow 29183 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=102
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=102
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3000133520 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 4: device present, speed: 1.5Gb/s
ahcisata0 port 5: device present, speed: 3.0Gb/s
drm: Enabling RC6 states: RC6 on, RC6p off, RC6pp off
atapibus0 at atabus0: 1 targets
cd0 at atapibus0 drive 0: <ASUS DRW-24B5ST, D2D0CL060360, 1.00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd0 at atabus1 drive 0
wd0: <INTEL SSDSC2CT060A3>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub4 at uhub2 port 2: PI Engineering Kinesis Keyboard Hub, class 9/0, rev 1.10/3.20, addr 3
uhub4: 4 ports with 2 removable, bus powered
uhidev0 at uhub4 port 2 configuration 1 interface 0
uhidev0: vendor 0x05f3 product 0x0007, rev 1.10/3.20, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 2 configuration 1 interface 1
uhidev1: vendor 0x05f3 product 0x0007, rev 1.10/3.20, addr 4, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub4 port 4 configuration 1 interface 0
uhidev2: Logitech USB Trackball, rev 1.10/14.00, addr 5, iclass 3/1
ums0 at uhidev2: 5 buttons
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
drm: initializing kernel modesetting (RV710 0x1002:0x954F 0x1043:0x02A8).
drm: register mmio base: 0xf7c20000
drm: register mmio size: 65536
DRM error in radeon_get_bios: Unable to locate a BIOS ROM
: error: Fatal error during GPU init
radeon0: unable to attach drm: 22
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)